Hello Alan,
thanks much for testing.
I have rebased RPi related changes to the actual master
head and rebuild toolchain to Newlib 2.4.0.20160527 and
GCC 6-20160526. The test on RPi1 from U-boot goes
OK so I have pushed changes to the master.
On Monday 30 of May 2016 23:04:36 Alan Cudmore wrote:
I glanced and thought they looked fine. Wait until Tuesday to see if
Alan gets a chance to test.
On Fri, May 27, 2016 at 5:26 PM, Alan Cudmore wrote:
> Hi Pavel,
> I will try to run the tests with the HDMI output before Monday.
>
> If I get time, I’ll try the Raspberry Pi zero and also see if I c
Hi Pavel,
I will try to run the tests with the HDMI output before Monday.
If I get time, I’ll try the Raspberry Pi zero and also see if I can narrow down
the firmware issue.
Eventually I would like to try the u-boot option as well as JTAG debugging.
Alan
> On May 27, 2016, at 10:18 AM, Pavel
Hello all,
patches seems to not change situation/make problems
so if there is no remark I would push them on Monday.
Do you agree?
The RPi1 and RPi2 testing state:
Tested to work on RPi1 with serial and graphic output
and direct boot and boot over U-boot.
Reported to work on RPi2 by Alan Cudmore
