From: Chris Johns
Closes #3760
---
bsps/arm/shared/cp15/arm-cp15-set-ttb-entries.c | 16 ++--
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/bsps/arm/shared/cp15/arm-cp15-set-ttb-entries.c
b/bsps/arm/shared/cp15/arm-cp15-set-ttb-entries.c
index c2be0f566e..cf2d555d18
These patches add libdebugger support for the beagleboneblack.
Special JTAG based BBB BSP probe and configure code is needed to enable
the debug hardware in the ARM. The code requires a small hardware mod
to work as the BBB hardware by default does not enable software
debugging.
The libdebugger A
From: Chris Johns
- Port the jbang code from C++ to C to enable DBGEN.
- Hook the libdebugger ARM backend support to return the base address
of the debug register set.
---
bsps/arm/beagle/start/bspdebug.c| 734
bsps/arm/beagle/start/bspdebug.h| 38 ++
From: Chris Johns
- Fix destorying the target and thread parts.
- Fix the ARM backend to support Cortex-A8 and ARM mode code.
- Use the DBGDSCR interrupt mask when single stepping.
- Use the DBGDSCR method of entry to debug mode to filter the
execptions.
- Add support for BSPs to control the AR
On 26/7/19 9:41 pm, Christian Mauderer wrote:
> I hadn't had a look at most patches yet and most likely that will need a
> bit of time. It's a lot of stuff. Most likely the bigger patches won't
> reach the mailing list so maybe adding a link to a branch on your github
> repo would be good.
There a
On Fri, Jul 26, 2019 at 1:48 PM Peter Dufault wrote:
> The follwing commit below in libbsd added “verbose” flags to both
> rpcUdpInit() and nfsInit(). Code using libbsd needs a change to compile.
> I don’t like adding a compile time check.
>
> Shall I change the RTEMS ones to match even if the f
The follwing commit below in libbsd added “verbose” flags to both rpcUdpInit()
and nfsInit(). Code using libbsd needs a change to compile.
I don’t like adding a compile time check.
Shall I change the RTEMS ones to match even if the flag doesn’t do anything?
[dufault@fubar rtems-libbsd]$ git log
- Am 26. Jul 2019 um 14:56 schrieb Ravindra Kumar Meena rmeena...@gmail.com:
>>
>> Ok, very good. This look all right. It is amazing how much information
>> Trace Compass can display with only sched_switch events.
>>
> Great!! We have something working very useful. :) :)
>
>>
>> Please figure
On Fri, Jul 26, 2019 at 6:42 PM Vijay Kumar Banerjee <
vijaykumar9...@gmail.com> wrote:
>
>
>
> On Fri, Jul 26, 2019 at 5:11 PM Christian Mauderer <
> christian.maude...@embedded-brains.de> wrote:
>
>> On 26/07/2019 13:22, Vijay Kumar Banerjee wrote:
>> > Hello everyone!
>> >
>> > I'm excited to p
On Fri, Jul 26, 2019 at 5:11 PM Christian Mauderer <
christian.maude...@embedded-brains.de> wrote:
> On 26/07/2019 13:22, Vijay Kumar Banerjee wrote:
> > Hello everyone!
> >
> > I'm excited to post the following patchset. With this patchset
> > I have the framebuffer working in BBB and have tested
>
> Ok, very good. This look all right. It is amazing how much information
> Trace Compass can display with only sched_switch events.
>
Great!! We have something working very useful. :) :)
>
> Please figure out how the state member values are defined. I think this
> is important to improve the dia
On 26/07/2019 13:22, Vijay Kumar Banerjee wrote:
> Hello everyone!
>
> I'm excited to post the following patchset. With this patchset
> I have the framebuffer working in BBB and have tested it with a
> BBB revC with HDMI connected Screen.
>
> This patchset uses mmap and hence it's necessary to
On Fri, Jul 26, 2019 at 4:53 PM Vijay Kumar Banerjee <
vijaykumar9...@gmail.com> wrote:
> Hello everyone!
>
> I'm excited to post the following patchset. With this patchset
> I have the framebuffer working in BBB and have tested it with a
> BBB revC with HDMI connected Screen.
>
> This patchset us
---
.../sys/arm/ti/am335x/am335x_scm_padconf.c| 305
.../sys/arm/ti/am335x/am335x_scm_padconf.h| 47 ++
freebsd/sys/arm/ti/omap4/omap4_scm_padconf.h | 83
freebsd/sys/arm/ti/ti_pinmux.c| 463 ++
freebsd/sys/arm/ti/ti_pinmux.h
---
Makefile.todo | 13 ++
buildset/default.ini | 1 +
libbsd.py | 33 +++
rtemsbsd/include/bsp/nexus-devices.h | 1 +
.../machine/rtems-bsd-kernel-namespace.h | 9 +
.
---
freebsd/sys/dev/fb/fbd.c | 3 ++
libbsd.py | 4 +++
rtemsbsd/include/bsp/nexus-devices.h | 3 ++
.../machine/rtems-bsd-kernel-namespace.h | 35 +++
rtemsbsd/include/rtems/bsd/local/opt_fb.h | 0
5 fi
---
Makefile.todo | 13 ++
libbsd.py | 12 +
rtemsbsd/include/bsp/nexus-devices.h | 2 +
.../machine/rtems-bsd-kernel-namespace.h | 2 +
rtemsbsd/include/rtems/bsd/local/fb_if.h | 45 ++
---
Makefile.todo | 27 ++
buildset/default.ini | 1 +
libbsd.py | 45 +
rtemsbsd/include/bsp/nexus-devices.h | 1 +
.../machine/rtems-bsd-kernel-namespace.h | 65 +
---
freebsd/sys/dev/vt/colors/vt_termcolors.c | 181 ++
freebsd/sys/dev/vt/hw/fb/vt_fb.c | 528
freebsd/sys/dev/vt/vt_core.c | 2933 +
3 files changed, 3642 insertions(+)
create mode 100644 freebsd/sys/dev/vt/colors/vt_termcolors.c
create mode 100
Hello everyone!
I'm excited to post the following patchset. With this patchset
I have the framebuffer working in BBB and have tested it with a
BBB revC with HDMI connected Screen.
This patchset uses mmap and hence it's necessary to apply the
patche ON TOP OF mmap patch to avoid merge conflict.
---
freebsd/sys/dev/fb/fb.c | 762 ++
freebsd/sys/dev/fb/fbd.c | 372 +++
freebsd/sys/dev/vt/colors/vt_termcolors.h | 63 ++
freebsd/sys/dev/vt/hw/fb/vt_fb.h | 54 ++
4 files changed, 1251 insertions(+)
create mode 100644 f
Hello,
Joel asked me to document the normal patch review process. Should this
be in a "Contributing" chapter in the user manual or should this stuff
be in the RTEMS Software Engineering manual?
--
Sebastian Huber, embedded brains GmbH
Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone
I have tested hello.exe on RPi2, BBB, and Zedboard and all are OK.
Please push.
I will run the full test suite after.
Thank you for the fix.
Chris
On 26/7/19 4:17 pm, Sebastian Huber wrote:
> There are no known ARMv7-M chips with a dual lockstep mode.
>
> Update #3773.
> ---
> bsps/arm/shared
23 matches
Mail list logo
