)/Dot1Q(vlan=vlan_vid,
> > > prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()
> > > else:
> > > pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP()
> > > pkt.show()
> > > sendpfast(pkt, iface=iface, pps=pps, loop=loop, fi
)/Dot1Q(vlan=vlan_vid,
> > > prio=vlan_prio, id=vlan_id)/IP(dst=dst_ip)/ICMP()
> > > else:
> > > pkt = Ether(dst=dst_mac, src=src_mac)/IP(dst=dst_ip)/ICMP()
> > > pkt.show()
> > > sendpfast(pkt, iface=iface, pps=pps, loop=loop, fi
> >
> > Thanks!
> >
> > BR,
> > Hideyuki Yamashita
> > NTT TechnoCross
> >
> > > Hi, Hideyuki
> > >
> > > The frame in your report is broadcast/multica
> >
> > The frame in your report is broadcast/multicast. Please, try unicast one.
> > For broadcast we have the ticket, currently issue is under investigation.
> > Anyway, thanks for reporting.
> >
> > With best regards, Slava
> >
> > > -Original M
14, 2019 7:02
> > To: dev@dpdk.org
> > Cc: Slava Ovsiienko
> > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> > VLAN header
> >
> > Hello Slava,
> >
> > As I reported to you, creating flow was successful with Co
Thursday, November 14, 2019 7:02
> To: dev@dpdk.org
> Cc: Slava Ovsiienko
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
> Hello Slava,
>
> As I reported to you, creating flow was successful with Connect-X5.
> However when I sent p
Hello Slava,
Note that I am using the following dpdk rc.
DPDK 19.11 rc-1
BR,
HIdeyuki Yamashita
NTT TechnoCross
> Hello Slava,
>
> As I reported to you, creating flow was successful with Connect-X5.
> However when I sent packets to the NIC from outer side of
> the host, I have problem.
>
>
>
Hello Slava,
As I reported to you, creating flow was successful with Connect-X5.
However when I sent packets to the NIC from outer side of
the host, I have problem.
[Case 1]
Packet distribution on multi-queue based on dst MAC address.
NIC config:
04:00.0 Mellanox Connect-X5
0.5.00.0 Intel XXV71
> > > > testpmd> vlan_pcp 3 / end
>
> Please, take (coming on Friday) 19.11rc2 and try.
>
> With best regards, Slava
> >
> > Thanks again.
> >
> >
> > BR,
> > Hideyuki Yamashita
> > NTT TechnoCross
> >
> > >
Hi, Hideyuki
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Thursday, November 7, 2019 6:46
> To: Slava Ovsiienko
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
> Hi Slava,
>
> Tha
vlan_pcp
> > > testpmd> vlan_pcp 3 / end
> > > Caught error type 16 (specific action): cause: 0x7ffdc9d98348, match
> > > on VLAN is required in order to set VLAN VID: Invalid argument
> > >
>
> It is fixed (and patch Is already merged -
> http://patche
Hi, Hideyuki
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Wednesday, November 6, 2019 13:04
> To: Slava Ovsiienko
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
> Dear Slava,
>
&
N VID: Invalid argument
>
> Thanks!
>
> BR,
> Hideyuki Yamashita
> NTT TechnoCross
>
>
>
> > > -Original Message-
> > > From: Hideyuki Yamashita
> > > Sent: Thursday, October 31, 2019 11:52
> > > To: Slava Ovsiienko
> > >
a Ovsiienko
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> > VLAN header
> >
> > Dear Slava,
> >
> > Your guess is corrrect.
> > When I put flow into Connect-X5, it was successful.
> Very ni
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Thursday, October 31, 2019 11:52
> To: Slava Ovsiienko
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
> Dear Slava,
>
> Your guess is
hnoCross
> Hi, Hideyuki
>
> > -Original Message-
> > From: Hideyuki Yamashita
> > Sent: Wednesday, October 30, 2019 12:46
> > To: Slava Ovsiienko
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
&
Hi, Hideyuki
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Wednesday, October 30, 2019 12:46
> To: Slava Ovsiienko
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
> Hello Slava,
>
>
Hello Slava,
Thanks for your help.
I added magic phrase. with chaging PCI number with proper one in my env.
It changes situation but still result in error.
I used /usertools/dpdk-setup.sh to allocate hugepage dynamically.
Your help is appreciated.
I think it is getting closer.
tx_h-yamashita@R
Hi, Hideyuki
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Wednesday, October 30, 2019 12:05
> To: Slava Ovsiienko
> Cc: Moti Haimovsky ; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
> Hi
-Original Message-
> > From: Hideyuki Yamashita
> > Sent: Friday, October 25, 2019 7:49
> > To: Slava Ovsiienko
> > Cc: Moti Haimovsky ; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> > VLAN header
>
upports-eeprom-access: no
> supports-register-dump: no
> supports-priv-flags: yes
>
> If you needs more info from my side, please let me know.
>
> BR,
> Hideyuki Yamashita
> NTT TechnoCross
>
> > Hi, Hideyuki
> >
> > > -Original Message-
> &
Cc: Slava Ovsiienko ; Moti Haimovsky
> > ; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> > VLAN header
> >
> > Dear Slava, Moti and all,
> >
> > Please let me know if you need more information.
> > Pa
Hi, Hideyuki
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Monday, October 21, 2019 10:12
> To: Hideyuki Yamashita
> Cc: Slava Ovsiienko ; Moti Haimovsky
> ; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLA
NIC by using rte_flow?
>
> BR,
> Hideyuki Yamashita
> NTT TechnoCross
>
>
> > > -Original Message-----
> > > From: Hideyuki Yamashita
> > > Sent: Friday, October 4, 2019 13:35
> > > To: Hideyuki Yamashita
> > > Cc: Moti Haimovsky ;
ideyuki Yamashita
> > Sent: Friday, October 4, 2019 13:35
> > To: Hideyuki Yamashita
> > Cc: Moti Haimovsky ; Slava Ovsiienko
> > ; dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> > VLAN header
> >
> > Can
> -Original Message-
> From: Hideyuki Yamashita
> Sent: Friday, October 4, 2019 13:35
> To: Hideyuki Yamashita
> Cc: Moti Haimovsky ; Slava Ovsiienko
> ; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 0/7] net/mlx5: support for flow action on
> VLAN header
>
&g
Can somebody (Mellanox guys?) help me out?
> Hello Moti,
>
> I have some questions on the patch.
> Just want to know how to use it.
>
> Q1. Is it correct understanding that the patch will be reflected in
> 19.11 if it is approved?
>
> Q2.Which action should I specify when I want to insert VLAN
Hello Moti,
I have some questions on the patch.
Just want to know how to use it.
Q1. Is it correct understanding that the patch will be reflected in
19.11 if it is approved?
Q2.Which action should I specify when I want to insert VLAN tag
to non-VLAN frame?
OF_PUSH_VLAN and OF_SET_VLAN_VID and O
VLAN actions support is implemented in librte_ethdev, and in
test-pmd application, based on [1] Generic flow API.
These actions conform to the VLAN actions defined in
[2] the OpenFlow Switch Specification.
rte_flow defines the following VLAN actions:
1. OF_POP_VLAN
Pop the outer-most VLAN hea
29 matches
Mail list logo
