22/09/2017 08:47, Shreyansh Jain:
> On Friday 22 September 2017 03:26 AM, Thomas Monjalon wrote:
> > 23/08/2017 16:11, Shreyansh Jain:
> >> --- a/MAINTAINERS
> >> +++ b/MAINTAINERS
> >> @@ -409,6 +409,7 @@ NXP dpaa
> >> M: Hemant Agrawal
> >> M: Shreyansh Jain
> >> F: drivers/bus/dpaa/
> >>
On Friday 22 September 2017 03:33 AM, Thomas Monjalon wrote:
23/08/2017 16:11, Shreyansh Jain:
--- a/config/defconfig_arm64-dpaa-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa-linuxapp-gcc
+#
+# Compile Environment Abstraction Layer
+#
+CONFIG_RTE_MAX_LCORE=4
+CONFIG_RTE_MAX_NUMA_NODES=1
+CONFIG
On Friday 22 September 2017 03:37 AM, Thomas Monjalon wrote:
23/08/2017 16:11, Shreyansh Jain:
Signed-off-by: Hemant Agrawal
Signed-off-by: Shreyansh Jain
---
doc/guides/nics/features/dpaa.ini | 1 +
drivers/net/dpaa/dpaa_ethdev.c| 21 +
It is very good to update f
On Friday 22 September 2017 03:26 AM, Thomas Monjalon wrote:
23/08/2017 16:11, Shreyansh Jain:
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -409,6 +409,7 @@ NXP dpaa
M: Hemant Agrawal
M: Shreyansh Jain
F: drivers/bus/dpaa/
+F: drivers/mempool/dpaa/
F: doc/guides/nics/dpaa.rst
F: doc/guides
22/09/2017 08:25, Shreyansh Jain:
> > It is a very long series introducing 3 different subsystems.
> > I think everybody was scared about reviewing it.
>
> Well, then Ferruh is quite a brave man - I got loads of comments from
> him. :D
He is :)
> > Why you did not split it?
>
> All the compone
On Friday 22 September 2017 03:25 AM, Thomas Monjalon wrote:
23/08/2017 16:11, Shreyansh Jain:
+CONFIG_RTE_LIBRTE_DPAA_MEMPOOL_DEBUG=n
Please could you try to remove this kind of option?
We are going to remove them from DPDK.
OK. I will revisit and remove which are not impacting the performa
In container, the process cannot be terminated by SIGINT/SIGTERM when
execute with 'stats-period' option.
Fixed by adding a flag to exit stats period loop after received either
SIGINT or SIGTERM.
Signed-off-by: Phil Yang
---
app/test-pmd/testpmd.c | 13 -
1 file changed, 12 insertion
Hi Thomas,
Thanks for comments. I will reply soon to those on v3 as well.
On Friday 22 September 2017 03:40 AM, Thomas Monjalon wrote:
09/09/2017 13:20, Shreyansh Jain:
DPAA, or Datapath Acceleration Architecture [R2], is a set of hardware
components designed for high-speed network packet proc
In container, the process cannot be terminated by SIGINT/SIGTERM when
execute with 'stats-period' option.
Fixed by adding a flag to exit stats period loop after received SIGINT/SIGTERM.
Signed-off-by: Phil Yang
---
app/test-pmd/testpmd.c | 13 -
1 file changed, 12 insertions(+), 1 de
On Friday 22 September 2017 02:47 AM, Nikhil Rao wrote:
> Add common APIs for configuring packet transfer from ethernet Rx
> queues to event devices across HW & SW packet transfer mechanisms.
> A detailed description of the adapter is contained in the header's
> comments.
>
> The adapter implement
> -Original Message-
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Yi Yang
> Sent: Wednesday, September 20, 2017 4:32 PM
> To: y...@fridaylinux.org
> Cc: dev@dpdk.org; Yang, Yi Y
> Subject: [dpdk-dev] [PATCH] vhost: fix vhost_user_set_mem_table error
>
> Usually vhost_user messa
On Friday 22 September 2017 02:47 AM, Nikhil Rao wrote:
> Signed-off-by: Nikhil Rao
> ---
Reviewed-by: Santosh Shukla
-Original Message-
> Date: Fri, 22 Sep 2017 02:47:12 +0530
> From: Nikhil Rao
> To: jerin.ja...@caviumnetworks.com, bruce.richard...@intel.com
> CC: gage.e...@intel.com, dev@dpdk.org, tho...@monjalon.net,
> harry.van.haa...@intel.com, hemant.agra...@nxp.com, nipun.gu...@nxp.com,
> narend
> -Original Message-
> From: Shijith Thotton [mailto:shijith.thot...@caviumnetworks.com]
> Sent: Tuesday, September 19, 2017 6:24 PM
> To: dev@dpdk.org
> Cc: Yigit, Ferruh ; Thomas Monjalon
> ; Yang, Qiming ; Patil, Harish
> ; Zhang, Helin ; Gregory
> Etelson ; Tan, Jianfeng ; Hu,
> Xuekun
> -Original Message-
> From: Yigit, Ferruh
> Sent: Friday, September 22, 2017 2:16 AM
> To: Zhao1, Wei ; dev@dpdk.org
> Cc: Wu, Jingjing
> Subject: Re: [dpdk-dev] [PATCH v2 1/2] net/i40e: fix clear xstats bug in vf
> port
>
> On 9/21/2017 4:11 AM, Zhao1, Wei wrote:
> > Hi，Ferruh
> >
> >
> -Original Message-
> From: Yuanhan Liu [mailto:y...@fridaylinux.org]
> Sent: Thursday, September 21, 2017 5:18 PM
> To: Tan, Jianfeng
> Cc: dev@dpdk.org; maxime.coque...@redhat.com; mtetsu...@gmail.com
> Subject: Re: [PATCH 10/12] vhost: support to kick in secondary process
>
> On Thu,
Ferruh,
> -Original Message-
> From: Yigit, Ferruh
> Sent: Thursday, September 21, 2017 6:37 PM
> To: Yang, Zhiyong ; dev@dpdk.org
> Cc: tho...@monjalon.net
> Subject: Re: [PATCH v4 1/5] net/bonding: remove bonding APIs using ABI
> versioning
>
> On 9/21/2017 9:32 AM, Zhiyong Yang wrote:
09/09/2017 13:20, Shreyansh Jain:
> DPAA, or Datapath Acceleration Architecture [R2], is a set of hardware
> components designed for high-speed network packet processing. This
> architecture provides the infrastructure to support simplified sharing of
> networking interfaces and accelerators by mul
09/09/2017 13:20, Shreyansh Jain:
> v4:
> - Some checkpatch fixes which were reported by checkpatch@dpdk
> - adding support for extended stats (patch 41)
Sorry, I did some comments on v3 instead of v4.
But I think they apply anyway.
23/08/2017 16:11, Shreyansh Jain:
> Signed-off-by: Hemant Agrawal
> Signed-off-by: Shreyansh Jain
> ---
> doc/guides/nics/features/dpaa.ini | 1 +
> drivers/net/dpaa/dpaa_ethdev.c| 21 +
It is very good to update features matrix and code in the same patch.
History tracki
23/08/2017 16:11, Shreyansh Jain:
> --- a/config/defconfig_arm64-dpaa-linuxapp-gcc
> +++ b/config/defconfig_arm64-dpaa-linuxapp-gcc
> +#
> +# Compile Environment Abstraction Layer
> +#
> +CONFIG_RTE_MAX_LCORE=4
> +CONFIG_RTE_MAX_NUMA_NODES=1
> +CONFIG_RTE_CACHE_LINE_SIZE=64
> +CONFIG_RTE_PKTMBUF_HE
23/08/2017 16:11, Shreyansh Jain:
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -409,6 +409,7 @@ NXP dpaa
> M: Hemant Agrawal
> M: Shreyansh Jain
> F: drivers/bus/dpaa/
> +F: drivers/mempool/dpaa/
> F: doc/guides/nics/dpaa.rst
> F: doc/guides/nics/features/dpaa.ini
This kind of patch can be
23/08/2017 16:11, Shreyansh Jain:
> +CONFIG_RTE_LIBRTE_DPAA_MEMPOOL_DEBUG=n
Please could you try to remove this kind of option?
We are going to remove them from DPDK.
For control path, no need of removing logs at compilation time.
For data path, compilation of logs is controlled by CONFIG_RTE_LOG
Added AES-CCM tests for Intel QAT PMD and OpenSSL PMD.
Signed-off-by: Pablo de Lara
Signed-off-by: Arek Kusztal
---
test/test/test_cryptodev.c | 290 ---
test/test/test_cryptodev_aead_test_vectors.h | 401 +++
2 files changed, 657 insert
Before adding AES-CCM tests, some test code used
for AES-GCM can be renamed, so it can be reused
for AES-CCM, as both need similar parameters.
Signed-off-by: Pablo de Lara
---
test/test/test_cryptodev.c | 245 +++--
...ectors.h => test_cryptodev_aead_test_
From: Arek Kusztal
This patch adds AES-CCM AEAD cipher and hash algorithm to
Intel QuickAssist Technology driver.
Signed-off-by: Arek Kusztal
---
drivers/crypto/qat/qat_adf/icp_qat_hw.h | 20 +++
drivers/crypto/qat/qat_adf/qat_algs_build_desc.c | 28
drivers/crypto/qat/qat_cryp
When creating a session for AES-GCM, since the key is going
to be constant, the OpenSSL context can initialize the key
at that moment, leaving the setting of the IV for the
operation handling.
Signed-off-by: Pablo de Lara
---
drivers/crypto/openssl/rte_openssl_pmd.c | 208 +++
Add support to AES-CCM, for 128, 192 and 256-bit keys.
Signed-off-by: Pablo de Lara
---
doc/guides/cryptodevs/features/default.ini | 3 +
doc/guides/cryptodevs/features/openssl.ini | 3 +
doc/guides/cryptodevs/openssl.rst| 1 +
doc/guides/rel_notes/release_17_11.rst |
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara
---
examp
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara
---
app/t
When using AES-GCM with OpenSSL, cipher direction
and authentication operation were being set incorrectly,
as the PMD was looking at the cipher and authentication
transform, instead of the new AEAD.
Fixes: b79e4c00af0e ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: sta...@dpdk.org
Signed-o
AES-CCM algorithm has some restrictions when
handling nonce (IV) and AAD information.
As the API stated, the nonce needs to be place 1 byte
after the start of the IV field. This field needs
to be 16 bytes long, regardless the length of the nonce,
but it is important to clarify that the first byte
AES-CCM support is added in the OpenSSL and QAT PMDs.
The PMDs and the test code have been reworked, to avoid duplications
with AES-GCM code, as both algorithms are quite similar (both are AEAD
algorithms).
Also, an optimization for AES-GCM (and AES-CCM after the last patch)
has been introduced,
On 9/21/2017 7:16 PM, Ferruh Yigit wrote:
> On 9/21/2017 4:11 AM, Zhao1, Wei wrote:
>> Hi，Ferruh
>>
>>> -Original Message-
>>> From: Yigit, Ferruh
>>> Sent: Thursday, September 14, 2017 9:31 PM
>>> To: Zhao1, Wei ; dev@dpdk.org
>>> Cc: Wu, Jingjing
>>> Subject: Re: [dpdk-dev] [PATCH v2 1/2
When adding a new entry in a hash table, there is
a maximum number of evictions that can be
performed. When the counter of these evictions reaches
this maximum, the entry cannot be added, as it is considered
that the algorithm has encountered an infinite loop.
The problem with the current implemen
From: Pavan Bhagavatula
The rte_timer_reset function should be able to register timers on service
lcores as they are EAL threads.
Signed-off-by: Pavan Nikhilesh
Acked-by: Harry van Haaren
---
This patch depends on http://dpdk.org/dev/patchwork/patch/29056/
v3 changes:
-updated the API as
> -Original Message-
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Wei Zhao
> Sent: Friday, September 15, 2017 4:13 AM
> To: dev@dpdk.org
> Cc: Zhao1, Wei
> Subject: [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and flush
>
> This feature enable queue regions configuration
This patch fixes the dynamic log levels testing in logs_autotest.
Introduction of rte_log_set_level() in patch c1b5fa94a46f was done
with parameter RTE_LOG_EMERG which caused all RTE_LOG() calls an
early return due to all given levels were far below EMERG.
If first two logs supposed to show up on c
On 9/21/2017 4:11 AM, Zhao1, Wei wrote:
> Hi，Ferruh
>
>> -Original Message-
>> From: Yigit, Ferruh
>> Sent: Thursday, September 14, 2017 9:31 PM
>> To: Zhao1, Wei ; dev@dpdk.org
>> Cc: Wu, Jingjing
>> Subject: Re: [dpdk-dev] [PATCH v2 1/2] net/i40e: fix clear xstats bug in vf
>> port
>>
>
Hi Jern,
> -Original Message-
> From: Jerin Jacob [mailto:jerin.ja...@caviumnetworks.com]
> Sent: Thursday, September 21, 2017 12:16
> To: Akhil Goyal
> Cc: dev@dpdk.org; declan.dohe...@intel.com;
> pablo.de.lara.gua...@intel.com; hemant.agra...@nxp.com;
> radu.nico...@intel.com; Boris Pi
On 09/21/2017 09:49 AM, Michal Jastrzebski wrote:
From: Kuba Kozak
Add file descriptor value check before calling close() function.
Coverity issue: 141297
Fixes: 811b6b25060f ("vfio: fix file descriptor leak in multi-process")
Cc: patr...@patrickmacarthur.net
Cc: sta...@dpdk.org
Signed-off-by
The assertion of return value from the open() function is done against
0, while it is a correct value - open() returns -1 in case of an error.
It causes problems while trying to run as a daemon, in which case, this
call to open() will return 0 as a valid descriptor.
Fixes: b94e5c9406b5 ("eal/arm: a
-Original Message-
> Date: Fri, 22 Sep 2017 02:47:11 +0530
> From: Nikhil Rao
> To: jerin.ja...@caviumnetworks.com, bruce.richard...@intel.com
> CC: gage.e...@intel.com, dev@dpdk.org, tho...@monjalon.net,
> harry.van.haa...@intel.com, hemant.agra...@nxp.com, nipun.gu...@nxp.com,
> narend
On 9/21/2017 8:26 AM, Zhao1, Wei wrote:
>
>
>> -Original Message-
>> From: Yigit, Ferruh
>> Sent: Thursday, September 21, 2017 3:10 PM
>> To: Zhao1, Wei ; dev@dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH v3 1/2] net/i40e: queue region set and flush
>>
>> On 9/21/2017 7:48 AM, Zhao1, Wei wro
Hi Nikhil,
Few comments Inline
On Fri, Sep 22, 2017 at 02:47:13AM +0530, Nikhil Rao wrote:
> Add common APIs for configuring packet transfer from ethernet Rx
> queues to event devices across HW & SW packet transfer mechanisms.
> A detailed description of the adapter is contained in the header's
>
On Wed, Sep 20, 2017 at 11:12:53AM +0200, Olivier Matz wrote:
> The initial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
>
>
Hi all,
I get a EINVAL since DPDK 16.07 when trying to allocate a mempool with
rte_pktmbuf_pool_create. This is when I use --no-huge --vdev=eth_ring0. But
this happens before accessing the virtual device in any ways.
Which, btw shows the documentation is wrong as it indicates :
EINVAL - cache
On Thu, 21 Sep 2017 15:04:04 +0200
Lukasz Majczak wrote:
> The assertion of return value from the open() function is done against
> 0, while it is a correct value - open() returns -1 in case of an error.
> It causes problems while trying to run as a daemon, in which case, this
> call to open() wi
Support compiling the FreeBSD kernel modules using meson and ninja.
Signed-off-by: Bruce Richardson
---
config/rte_config.h | 5
lib/librte_eal/bsdapp/BSDmakefile.meson | 42 +
lib/librte_eal/bsdapp/contigmem/meson.build | 32
25/08/2017 15:46, Amr Mokhtar:
> +/**
> + * Configure a device.
> + * This function must be called on a device before setting up the queues and
> + * starting the device. It can also be called when a device is in the stopped
> + * state. If any device queues have been configured their configuration
On 9/21/2017 10:57 AM, Chas Williams wrote:
> From: "Charles (Chas) Williams"
>
> In certain situations, low speed interfaces, it may be desirable to
> have the flow control provided by the kernel queueing disciplines.
>
> Signed-off-by: Chas Williams
Reviewed-by: Ferruh Yigit
25/08/2017 15:46, Amr Mokhtar:
> This RFC describes a proposal for the Wireless Base Band Device (bbdev) in
> DPDK
> that abstracts HW accelerators based on FPGA and/or Fixed Function
> Accelerators
> that assist with LTE Physical Layer processing. Furthermore, it decouples the
> application f
> -Original Message-
> From: Pavan Nikhilesh [mailto:pbhagavat...@caviumnetworks.com]
> Sent: Thursday, September 21, 2017 12:50 PM
> To: Dumitrescu, Cristian ;
> step...@networkplumber.org
> Cc: dev@dpdk.org; Pavan Bhagavatula
>
> Subject: [dpdk-dev] [PATCH v3 1/3] eal: move bitmap from
From: Kuba Kozak
Add file descriptor value check before calling close() function.
Coverity issue: 141297
Fixes: 811b6b25060f ("vfio: fix file descriptor leak in multi-process")
Cc: patr...@patrickmacarthur.net
Cc: sta...@dpdk.org
Signed-off-by: Kuba Kozak
Acked-by: Anatoly Burakov
---
v2:
26/08/2017 02:06, Cristian Dumitrescu:
> This patch set introduces an ethdev-based generic API for Traffic
> Metering and Policing (MTR), which is yet another standard RX offload for
> Ethernet devices.
Thanks for bringing yet another offload API.
What are the expected devices to implement this A
26/08/2017 02:06, Cristian Dumitrescu:
> +DPDK_17.11 {
> + global:
> +
> + rte_eth_dev_mtr_ops_get;
> + rte_mtr_meter_profile_add;
> + rte_mtr_meter_profile_delete;
> + rte_mtr_create;
> + rte_mtr_destroy;
> + rte_mtr_meter_profile_update;
> + rte_mtr
On Monday 18 September 2017 08:27 PM, Ferruh Yigit wrote:
On 9/9/2017 12:21 PM, Shreyansh Jain wrote:
From: Hemant Agrawal
Signed-off-by: Hemant Agrawal
<...>
+static int
+dpaa_dev_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
+ unsigned int n)
+{
+
On Monday 18 September 2017 08:27 PM, Ferruh Yigit wrote:
On 9/9/2017 12:21 PM, Shreyansh Jain wrote:
From: Hemant Agrawal
Signed-off-by: Hemant Agrawal
<...>
+static int
+dpaa_fw_version_get(struct rte_eth_dev *dev __rte_unused,
+char *fw_version,
+
On Monday 18 September 2017 08:26 PM, Ferruh Yigit wrote:
On 9/9/2017 12:21 PM, Shreyansh Jain wrote:
Add support for parsing the packet type and L2/L3 checksum offload
capability information.
Signed-off-by: Hemant Agrawal
Signed-off-by: Shreyansh Jain
---
doc/guides/nics/features/dpaa.ini
The assertion of return value from the open() function is done against
0, while it is a correct value - open() returns -1 in case of an error.
It causes problems while trying to run as a daemon, in which case, this
call to open() will return 0 as a valid descriptor.
Signed-off-by: Lukasz Majczak
On Monday 18 September 2017 08:26 PM, Ferruh Yigit wrote:
On 9/9/2017 12:21 PM, Shreyansh Jain wrote:
Signed-off-by: Hemant Agrawal
Signed-off-by: Shreyansh Jain
<...>
+static int dpaa_eth_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete __rte_unuse
On Monday 18 September 2017 08:25 PM, Ferruh Yigit wrote:
On 9/9/2017 12:21 PM, Shreyansh Jain wrote:
Signed-off-by: Hemant Agrawal
Signed-off-by: Shreyansh Jain
<...>
+
+/* Handle all mbufs on an external pool (non-dpaa2) */
minor typo, but is intention dpaa ?
Yes, this is 'dpaa'.
Hello Ferruh,
Apologies for delay in response for these, I am already working to get
the next version based on your comments. Meanwhile, some comments inline...
On Monday 18 September 2017 08:25 PM, Ferruh Yigit wrote:
On 9/9/2017 12:21 PM, Shreyansh Jain wrote:
Signed-off-by: Hemant Agrawal
21/09/2017 13:55, Van Haaren, Harry:
> > From: Yang, Yi Y
> > Sent: Thursday, September 21, 2017 2:51 AM
> > To: dev@dpdk.org
> > Cc: Van Haaren, Harry ; Yang, Yi Y
> >
> > Subject: [PATCH v2] service: fix build error "ids uninitialized in
> > rte_service_map_lcore_set"
> >
> > v1->v2
> > - Cha
Add unit tests for rte_event_eth_rx_adapter_xxx() APIs
Signed-off-by: Nikhil Rao
---
test/test/test_event_eth_rx_adapter.c | 399 ++
test/test/Makefile| 1 +
2 files changed, 400 insertions(+)
create mode 100644 test/test/test_event_eth_rx_a
Add common APIs for configuring packet transfer from ethernet Rx
queues to event devices across HW & SW packet transfer mechanisms.
A detailed description of the adapter is contained in the header's
comments.
The adapter implementation uses eventdev PMDs to configure the packet
transfer if HW supp
Eventdev-based networking applications require a component to dequeue
packets from NIC Rx queues and inject them into eventdev queues[1]. While
some platforms (e.g. Cavium Octeontx) do this operation in hardware, other
platforms use software.
This patchset introduces an ethernet Rx event adapter t
Signed-off-by: Nikhil Rao
---
lib/librte_eventdev/rte_eventdev_pmd.h | 6 ++
drivers/event/sw/sw_evdev.c| 15 +++
2 files changed, 21 insertions(+)
diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h
b/lib/librte_eventdev/rte_eventdev_pmd.h
index 89990d1c4..de411fdf
The caps API allows application to get information
needed to configure the ethernet receive adapter for the eventdev and
ethdev pair.
The PMD callbacks are used by the rte_event_eth_rx_xxx() APIs to
configure and control the ethernet receive adapter if packet transfers
from the ethdev to eventdev
-Original Message-
> Date: Tue, 12 Sep 2017 17:59:25 +0530
> From: Nikhil Rao
> To: jerin.ja...@caviumnetworks.com, bruce.richard...@intel.com
> CC: gage.e...@intel.com, dev@dpdk.org, tho...@monjalon.net,
> harry.van.haa...@intel.com, hemant.agra...@nxp.com, nipun.gu...@nxp.com,
> narend
On 19/09/17 09:28, Olivier MATZ wrote:
Hi,
On Thu, Sep 14, 2017 at 09:22:38AM +0200, Eelco Chaudron wrote:
On 13/09/17 11:39, Thomas Monjalon wrote:
12/09/2017 15:08, Eelco Chaudron:
Call the mlockall() function, to attempt to lock all of its process
memory into physical RAM, and preventing t
-Original Message-
> Date: Thu, 21 Sep 2017 17:11:26 +0530
> From: Gowrishankar
> To: dev@dpdk.org
> CC: Chao Zhu , Bruce Richardson
> , Konstantin Ananyev
> , Jerin Jacob
> , Gowrishankar Muthukrishnan
>
> Subject: [PATCH] eal: fix TSC resolution in hz for ppc_64 architecture
> X-Mai
Hi Harry,
On Thu, Sep 21, 2017 at 11:53:48AM +, Van Haaren, Harry wrote:
> > From: Nelio Laranjeiro [mailto:nelio.laranje...@6wind.com]
> > Sent: Thursday, September 21, 2017 12:48 PM
> > To: dev@dpdk.org
> > Cc: Van Haaren, Harry
> > Subject: [PATCH] eal: fix service array initialisation
> >
> From: Yang, Yi Y
> Sent: Thursday, September 21, 2017 2:51 AM
> To: dev@dpdk.org
> Cc: Van Haaren, Harry ; Yang, Yi Y
>
> Subject: [PATCH v2] service: fix build error "ids uninitialized in
> rte_service_map_lcore_set"
>
> v1->v2
> - Change title to more descriptive one
> - Add issue reprodu
> From: Nelio Laranjeiro [mailto:nelio.laranje...@6wind.com]
> Sent: Thursday, September 21, 2017 12:48 PM
> To: dev@dpdk.org
> Cc: Van Haaren, Harry
> Subject: [PATCH] eal: fix service array initialisation
>
> GCC is complaining on variable used without being initialised.
>
> dpdk.org/lib/libr
From: Pavan Bhagavatula
Signed-off-by: Pavan Nikhilesh
---
MAINTAINERS | 5 +
1 file changed, 5 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index a0cd75e..3522497 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -143,6 +143,11 @@ F: lib/librte_eal/common/rte_service.c
F: doc/guides/
From: Pavan Bhagavatula
This patch adds a test for verifying the bitmap operations.
Signed-off-by: Pavan Nikhilesh
---
test/test/Makefile | 1 +
test/test/test_bitmap.c | 192
2 files changed, 193 insertions(+)
create mode 100644 test/te
From: Pavan Bhagavatula
The librte_sched uses rte_bitmap to manage large arrays of bits in an
optimized method so, moving it to eal/common would allow other libraries
and applications to use it.
Signed-off-by: Pavan Nikhilesh
---
v3 changes:
- address review comments
v2 changes:
- undo rte_
On Thu, Sep 21, 2017 at 04:32:40PM +0800, Zhiyong Yang wrote:
> Extend port_id definition from uint8_t to uint16_t in lib and drivers
> data structures, specifically rte_eth_dev_data. Modify the APIs,
> drivers and app using port_id at the same time.
>
> Fix some checkpatch issues from the origina
GCC is complaining on variable used without being initialised.
dpdk.org/lib/librte_eal/common/rte_service.c:
In function ‘rte_service_start_with_defaults’:
dpdk.org/lib/librte_eal/common/rte_service.c:449:9:
error: ‘ids[0]’ may be used uninitialized in this function
[-Werror=maybe-uninitializ
From: Gowrishankar Muthukrishnan
In ppc_64, rte_rdtsc() returns timebase register value which increments
at independent timebase frequency and hence not related to lcore cpu
frequency to derive into. In this patch, we fix get_tsc_freq() to not
depend upon rte_rdtsc(), but obtain cpu current frequ
From: Pavan Bhagavatula
This function can be used to check the role of a specific lcore.
Signed-off-by: Pavan Nikhilesh
Acked-by: Harry van Haaren
---
v3 changes:
- moved changes to eal_common_thread.c
- addressed coding style issues
v2 changes:
- removed ack due to significant changes in
On Wed, Sep 20, 2017 at 06:41:28PM +0200, Timothy Redaelli wrote:
> This commit fixes the setting of relative rpath on dpdk-testpmd for drivers
> ($libdir/dpdk/drivers) to the correct absolute rpath
> ($prefix$libdir/dpdk/drivers)
>
> Fixes: d123bba2dfbe ("build: add initial infrastructure for me
On Thu, Sep 21, 2017 at 10:25:18AM +, Dumitrescu, Cristian wrote:
Hi Cristian,
> Hi Pavan,
>
> Thank you, just a couple of minor issues below:
>
Sure will spin up a v3 with the mentioned changes.
Thanks,
Pavan
> > -Original Message-
> > From: Pavan Nikhilesh [mailto:pbhagavat...@cavium
On 9/21/2017 9:32 AM, Zhiyong Yang wrote:
> There are two bonding APIs using ABI versioning, and both have
> port_id as parameter. Since we are already breaking ABI, no need
> to keep older versions of APIs.
>
> Signed-off-by: Zhiyong Yang
<...>
> -int
> -rte_eth_bond_8023ad_conf_get_v1708(uint
As discussed with other maintainers,
we need to move the integration deadline by one week:
October 6 (instead of September 29)
It will give us some time to work and review the features
after the discussions which will happen during the summit (next week).
When this change will be accepted
Hi Pavan,
Thank you, just a couple of minor issues below:
> -Original Message-
> From: Pavan Nikhilesh [mailto:pbhagavat...@caviumnetworks.com]
> Sent: Wednesday, September 20, 2017 4:37 PM
> To: Dumitrescu, Cristian ;
> step...@networkplumber.org
> Cc: dev@dpdk.org; Pavan Bhagavatula
>
-Original Message-
> Date: Thu, 14 Sep 2017 16:23:36 +
> From: "Van Haaren, Harry"
> To: Jerin Jacob
> CC: "dev@dpdk.org" , "Richardson, Bruce"
>
> Subject: RE: [PATCH] event/sw: rename map file to standard name
>
> > From: Richardson, Bruce
> > Sent: Thursday, September 14, 2017 3
From: Gowrishankar Muthukrishnan
This patch adds altivec support for lpm packet processing in powerpc.
Signed-off-by: Gowrishankar Muthukrishnan
---
v2:
* coding style standards
MAINTAINERS| 1 +
examples/l3fwd/l3fwd_altivec.h | 284 +
-Original Message-
> Date: Mon, 18 Sep 2017 14:42:20 +0100
> From: Harry van Haaren
> To: dev@dpdk.org
> CC: jerin.ja...@caviumnetworks.com, Harry van Haaren
>
> Subject: [PATCH] event/sw: remove spare newline from error logs
> X-Mailer: git-send-email 2.7.4
>
> This commit removes extr
On Thu, Sep 21, 2017 at 09:41:29AM +, Van Haaren, Harry wrote:
> > From: Pavan Nikhilesh [mailto:pbhagavat...@caviumnetworks.com]
> > Sent: Thursday, September 21, 2017 9:58 AM
> > To: Van Haaren, Harry ; tho...@monjalon.net
> > Cc: dev@dpdk.org; Pavan Bhagavatula
> > Subject: [dpdk-dev] [PATC
On Tue, 2017-09-19 at 15:54 +0530, Shijith Thotton wrote:
> Issuing reset during uio device open caused PMD init failure for some
> NIC VFs (i40, ixgbe, qede) in host. So this initial reset is removed.
> Bus master enable is kept as part of open since we disable it in uio
> device release.
>
> Fix
From: "Charles (Chas) Williams"
In certain situations, low speed interfaces, it may be desirable to
have the flow control provided by the kernel queueing disciplines.
Signed-off-by: Chas Williams
---
drivers/net/af_packet/rte_eth_af_packet.c | 24 ++--
1 file changed, 18 in
-Original Message-
> Date: Fri, 15 Sep 2017 06:14:26 +
> From: Nipun Gupta
> To: Harry van Haaren , "dev@dpdk.org"
>
> CC: "jerin.ja...@caviumnetworks.com"
> Subject: RE: [dpdk-dev] [PATCH v4 0/4] eventdev: add attribute based get
> APIs
>
>
>
> > --
> > 2.7.4
>
> Changes look
Hi,
Referring to Patrick suggestion I'll prepare patch with (fd >= 0) condition.
Thanks,
Kuba
> -Original Message-
> From: Patrick MacArthur [mailto:patr...@patrickmacarthur.net]
> Sent: Thursday, September 21, 2017 04:28
> To: Burakov, Anatoly ; Kozak, KubaX
>
> Cc: dev@dpdk.org; sta
> From: Pavan Nikhilesh [mailto:pbhagavat...@caviumnetworks.com]
> Sent: Thursday, September 21, 2017 9:58 AM
> To: Van Haaren, Harry ; tho...@monjalon.net
> Cc: dev@dpdk.org; Pavan Bhagavatula
> Subject: [dpdk-dev] [PATCH v2] eal: add function to check lcore role
>
> From: Pavan Bhagavatula
>
On 9/21/2017 4:25 AM, Chas Williams wrote:
> From: "Charles (Chas) Williams"
>
> In certain situations, low speed interfaces, it may be desirable to
> have the flow control provided by the kernel queueing disciplines.
>
> Signed-off-by: Chas Williams
> ---
> drivers/net/af_packet/rte_eth_af_pa
On Thu, Sep 21, 2017 at 03:04:39PM +0800, Tan, Jianfeng wrote:
> >On Fri, Aug 25, 2017 at 09:40:50AM +, Jianfeng Tan wrote:
> >>To support kick in secondary process, we propose callfd_pri and
> >>kickfd_pri to store the value in primary process; and by a new
> >>API, rte_vhost_set_vring_effecti
-Original Message-
> Date: Thu, 14 Sep 2017 13:56:47 +0530
> From: Akhil Goyal
> To: dev@dpdk.org
> CC: declan.dohe...@intel.com, pablo.de.lara.gua...@intel.com,
> hemant.agra...@nxp.com, radu.nico...@intel.com, bor...@mellanox.com,
> avia...@mellanox.com, tho...@monjalon.net, sandeep.ma
Hi Thomas,
Yes we can wait to 18.02. I'll prepare v6 patchset without these changes.
Best regards,
Kuba
> -Original Message-
> From: Thomas Monjalon [mailto:tho...@monjalon.net]
> Sent: Tuesday, September 19, 2017 23:27
> To: Kozak, KubaX
> Cc: dev@dpdk.org; Richardson, Bruce ; Jain,
>
1 - 100 of 112 matches
Mail list logo
