It's general recommended that you symbolic link the javaplugin_oji.so
into /usr/lib/mozilla/plugins. You may want to try that and see if it
keeps galeon from bombing.
Good Luck.
Marshal
>>>>> "stan" == stan <[EMAIL PROTECTED]> writes:
> On Fri,
uld this file normally come from? I vaugely
> remeber it, and at least one other file being involved. And
> copying _just_ that fiel over to the non-working machine make
> galeon crash when it encounters Java, so, wherever it came from
> there must be a bit more to it tahn
5
>> (>= 5.2.20010310-1), libxml2
> Maybe I should have specified X based... gtk or gnome based even
> better. I saw that and tried using it. Its just not easy
> enough to use for putting my notes into.
Maybe gnome-think. It seems pretty basic, so maybe it
> installed?
Depends on what you want to do. If you want straight C/C++ only, then
you need to install the libc*-dev and the libstdc++*-dev packages.
If you want to get more into other libraries, you'll need to install
the appropriate -dev packages. That'll give you all the hea
relavent information and perhaps we can help you.
Good luck.
Marshal
>>>>> "Ken" == Ken Schrock <[EMAIL PROTECTED]> writes:
> With Woody, either 2.2 or 2.4 kernel, on my three 7 disk Debian
> CD install s And on all the Lindows (Woody 3.x 2.4 kern
your problem.
Keep an open mind. Maybe you did make a stupid mistake (like not
logging out and back in again). Do it, and then reply to give the
result. As people who help, and since we can't be on your machine, we
have to remove everything that is impossible to find the solution.
After you g
on these
> problem machines. I can't reproduce it here.
Here's a bug report on the problem.
http://www.openoffice.org/issues/show_bug.cgi?id=2612
In summary, it seems that if you don't use freetype for X, it'll work,
but then you don't get true type fonts...
Good Luck
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> now, my system boots up and as a user i can log into
> it. however, none of the sound files can play. kde's control
> panel shows that there is no sound card.
You probably have to add yourself to the "audio" group.
as root:
# adduser audio
Then log out and then lo
c/bus/usb usbdevfsdefaults00
to your /etc/fstab.
Joerg> Thanks for helping me (or pointing me to the right docs...)
The "right docs(tm)" would be found at
http://www.linux-usb.org
You'll find almost everything that you need there, for most normal
purposes. I do
ooking into hpijs, which is HPs (now Free) driver for most of
their product line. Works great with my HP deskjet 957c. Duplexing,
high quality. As good as Windows! (But I wouldn't know as I've
never used it under Windows, or MacOS)
Also check out www.linuxprinting.org
Good Luck.
him, try /dev/sda[1-4]
And also check out
http://www.linux-usb.org/USB-guide/x498.html
Good Luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Klaus> happens while install/upgrade/remove
I do when trying to install nautilus, and I don't have the skills to
figure it out.
Perhaps someone who can find something useful for the debugs should
file a bug?
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
x27;t have the
>> skills to figure it out.
>>
>> Perhaps someone who can find something useful for the debugs
>> should file a bug?
>>
>> Marshal
Jeff> I got this same error while intalling nautilus into woody
Jeff> rec
Johann> Or is there another way to go to the top or bottom of the
Johann> document in emacs21?
M-> or M-x end-of-buffer.
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
convert it.
In a semi-related question, is there a way to change the / partition
to ext3 and keep the .journal file hidden? Without booting from a
book disk, since I don't have a bootable disk drive, nor a CD burner.
(Running a Mac PowerBook.)
Or is that not even recommended?
Marshal
for suggested programming languages.
If this sounds very vague, it's because I haven't quite got all the
specifics down in my head yet. It's still a sketch, but I'd like to
get something going.
Thanks for any help!
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
section 3.6.1.1. Can't help
you more than that, since I don't use the plugin. Can't on a PowerBook.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ads and installs 18 of
Satelle> them. The next time you say install it will include the 2
Satelle> packages it didn't download last time. Even after
Satelle> rebooting or updating the source.list.
According to the apt-get(8) man page, try looking at
/var/lob/apt/lists/p
work with lprng + magicfilter, and pdq. The docs for
hpijs are fairly good, if a little difficult to read. If you want, I
can send the config files.
Good Luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
setting up network printers.
Sorry.
If this is all garbage because I haven't followed the thread closely
enough, just ignore. ^_^
Good luck!
Marshal
David> What I don't need is something sitting between the document
David> and the printer that limits resolution to 600 dpi
s probably a good thing to have
those dependancies met before trying to build the binary.
I build the lame package once, but it's been a while...
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
buildpackage -rfakeroot
Colin> -uc -us' (or 'debian/rules build; fakeroot debian/rules
Colin> binary' if you prefer').
Agreed. It does require some "higher" privliages though. To run
'install', I think. I use sudo myself. But yes, don't be root unless
you have to.
Good Luck!
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
er it being updated recently. Is there
Robert> a way to verify pkg's like an integrity check?
What version of sudo do you have? 1.6.6-1 in borked.
Look at the following bug and see if it applys to you.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=144665&repeatmerged=ye
"glx"
is in the Section "Module"?
That's just on a whim at looking at the error message.
Good Luck.
Marshal
Vittorio> /usr/lib/tora/tora.real: relocation
Vittorio> error: /usr/lib/tora/tora.real: undefined symbol:
Vittorio> __15QMotifPlusSty
make sure that you had permissions to write to the proper
device? (Meaning, most probably, did you add yourself to the lp group
and relog in?)
Please give some more information. I haven't had much problem using
pdq, but it was took a little bit of time to set up. But it works.
Good l
. The
Daniel> GIF extension doesn't show up (even grayed out) on the
Daniel> list of types to save as.
Daniel> Could someone set me straight on the using Gimp with GIFs
Daniel> under Debian?
I think you need gimp1.2-nonfree. "Use at your own legal r
uncompressing gifs and displaying them.
Writing gifs is another thing, which depends on the patented
compression algo. I may be way off base here, but I think I'm one the
right track...
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
home, but I obviously don't want to lug an
extra keyboard around with me when I travel.
Any suggestions or pointers would be appreciated. Thanks in advance.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
accounts.
Then you can edit /etc/email-addresses to rewrite the From headers.
e.g.
name1: [EMAIL PROTECTED]
name2: [EMAIL PROTECTED]
Then you just set up fetchmail to get the mail and dump it to the
proper accounts. No need to hack up mutt or gnus to do it.
But you have all this switching.
know this is
Martin> obscure but if anyone has any suggestions or fixes . . .
You may want to change the panel level to "below". Right click on an
empty part of the panel -> Panel -> Properties -> Level -> Below.
Good Luck.
Marshal
--
To UNSUBSCRIBE, email to [EM
ial port, I would think that things would be pretty
generic.
you need to give some more info.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ux devices list, so I have a feel of what
works and what doesn't. So I'm looking for opinions and expriences.
Thanks!
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>>>>> "Peter" == Peter Holm <[EMAIL PROTECTED]> writes:
Peter> Hi how do i set the clock and read the same ? /ph
'man date' or 'date --help'
good luck!
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
nly
products.
Thanks a lot. To everyone too, for their help. I think I'm off to
get it tomorrow.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
to solve your problem.
I once wanted to download mail from different POP accounts and I
wanted to reply to them using the same addresses from which I recieved
them. What I ended up doing was making separate accounts on my local
system for each of the e-mail addresses. So, I had something like
inevitably get tangled in.
YES! Sorry to and to an OT thread. But FINALLY someone else that
hates umbrellas. Now it's just to convince the other 300 million or
so people in Japan...
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ledge that I've seen on the net.
Good luck.
Marshal
>>>>> "arthur" == arthur dent <[EMAIL PROTECTED]> writes:
arthur> I am trying to begin to secure my P.C.. It's only a home
arthur> computer but may hopefully later be linked to a second
ese for??
You probably don't need them, and to what I heard, they are quite
insecure. I have them turned off, with no ill effects. But I don't
run an internal network.
Actually, I don't even use inetd. I have exim running as a daemon,
and the only thing I use the superserve
USB modem, make sure that it's CDC compatible
and ACM compatible. Then you can use it by just compiling the kernel
to include the ACM module.
As with everything USB, check www.linux-usb.org before buying.
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>>>>> "O" == O Senhor <[EMAIL PROTECTED]> writes:
O> hello, Do you know about this error message, that appears
O> when i want compile my kernel?
make[1]: as86: Command not found
Here's the key. you need as86 from the bin86 package.
cking on the ? in
Andrew> the Gnome panel just brings up a browser with the msg:
Andrew> Could not load default TOC).
Have you installed gnome-help-data?
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
onf
arthur> file. Below is a copy of mine, how do I know what I need
arthur> and dont need?
Well, depends on what you plan to do...
I personally don't have anything running except smtp, and even that, I
run from daemon. But your needs may be different.
Most probably, you don&#x
How about the languages section under preferences?
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
mid about it.
Andrew> Thanks for any pointers.
Download 'kernel-package', and read
/usr/share/doc/kernel-package/README.gz.
Good luck!
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
tly. However, you may want to look at
this site I dug up...
http://geodsoft.com/howto/dualboot/combine.htm
Also, what do you mean by "corrupt"?
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
#x27;t display Japanese characters on my
system. But I haven't fulled around with locales yet. Does setting
locales change everything (error messages, etc.) to Japanese?
I work mostly in English, but it would be nice to have my address book
display my Japanese friends properly. At the mo
l.
usbserial.o and visor.o
I've had not problems with my Visor and Evolution syncing via USB.
The IR port... that's another matter...
Do what you can, and come back if you have any more questions.
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
your modules. Try:
mount -t usbdevfs none /proc/bus/usb
to get the proc files.
You might want to add
none/proc/bus/usb usbdevfsdefaults00
to your /etc/fstab to make it mount of boot.
Try that and see if you get anything in /proc/bus/usb.
Good luck
there, but I though I'd get this off for any ideas on what may
be the cause.
Thanks for the help.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
back in as your_username and your_username should
have access to /dev/dsp.
Good luck.
Marshal
>>>>> "umidori" == umidori kamome <[EMAIL PROTECTED]> writes:
umidori> Hey Yo Hoh! Due to the list's help I can now enjoy my
umidori> movies with xine. Thank you
o find a djbdns-ppc
Matthew> version.
Matthew> Any ideas?
apt-get install djbdns-installer
This should download it and compile it for you. I run it on my
PowerBook Firewire without any problems.
Good Luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
t you
boot the computer and turn off the computer (respectively.). Of
course, that's if you have the /etc/rc?.d/ directories setup for it.
Look at /etc/defaults/iptables for more info.
Good Luck.
Marshal
>>>>> "Dan" == Dan Jacobson <[EMAIL PROTECTED]> writes:
or GIMP, if you want
overkill) and convert it. Just save it as a different an .xpm.
Take a look at the graphics section under dselect.
Good luck!
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
).
>
I know the gtk/gnome2 ones work, kinda of. Buggy, but I can enter stuff
into it. I haven't tried the emacs one, since emacs handles Japanese
well enough for me.
IIIMF has a lot of potential, but that's where it's at right now. Lots
of potential, but not enough show yet.
le pile of ham (real
mail) and feed it to sa-learn. Read 'man sa-learn' for all the details.
In brief:
sa-learn --spam
or
sa-learn --spam --mbox
and
sa-learn --ham
or
sa-learn --ham --mbox
Hope that helps.
Marshal
> Mike
>
>
> score MICROSOFT_EXECUTABLE +5
&g
be running pango which handles internationalization without
playing around with locales. So having the fonts is more important than
the locale.
Marshal
> --
> Marc Wilson | A sequel is an admission that you've been reduced
> [EMAIL PROTECTED] | to imitating yourself. -
e"
FontPath"/usr/lib/X11/fonts/Speedo"
FontPath"/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath"/usr/lib/X11/fonts/100dpi"
EndSection
See if that helps.
Good Luck.
Marshal
> Any links?
>
> Thanks,
> Viktor
signature.asc
Description: This is a digitally signed message part
ctually sees
which interface things are going out of. I guess the main thing is to
look at your routing table. (route).
Plug it in and try, and come back if you run into problems. ^_^
Good Luck.
Marshal
signature.asc
Description: This is a digitally signed message part
u
probably need to add a default gateway to your routing table.
Check if the default gateway is reasonable using
# route (as root. Haha!)
If not, then
# route add default gw
Good Luck.
Marshal
signature.asc
Description: This is a digitally signed message part
On Sun, 2003-11-02 at 01:41, Ron Johnson wrote:
> On Sun, 2003-11-02 at 03:28, Marshal Wong wrote:
> > On Sat, 2003-11-01 at 20:21, Jeffrey Barish wrote:
> > > When I use the kernel that I built from the source for 2.4.18-686, I get
> > > the message:
> > >
On Sun, 2003-11-02 at 03:20, Ron Johnson wrote:
> On Sun, 2003-11-02 at 05:03, Marshal Wong wrote:
> > On Sun, 2003-11-02 at 01:41, Ron Johnson wrote:
> > > On Sun, 2003-11-02 at 03:28, Marshal Wong wrote:
> > > > On Sat, 2003-11-01 at 20:21, Jeffrey Barish wrote:
&
On Sun, 2003-11-02 at 09:50, Jeffrey Barish wrote:
> Marshal Wong wrote:
> > On Sat, 2003-11-01 at 20:21, Jeffrey Barish wrote:
> >
> >>When I use the kernel that I built from the source for 2.4.18-686, I get
> >>the message:
> >>
> >>sendto:
or info dd for more
information. You use it for writing disk images, so I guess it should
work backwards too.
dd if=/dev/fd0 of=filename.img
Good luck.
Marshal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ernel or are you using a stock
kernel? Did you load the usb modules?
I don't know how well you know linux, so if you've already done all
that, please forgive. Let us know what steps you've taken and any error
results and maybe we can help yo
On Mon, 2003-10-06 at 01:01, Ralph F. De Witt wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Monday 06 October 2003 12:12 am, Marshal Wong wrote:
> > First off, did you recompile the kernel or are you using a stock
> > kernel? Did you load the usb modul
On Mon, 2003-10-13 at 20:25, M. Kirchhoff wrote:
> While looking through the deb-user archives for some font-related info, I
> discovered that there is still an insane amount of confusion regarding fonts
> under XFree86. Googling, which new users tend to rely on, results in myriad yet
> often contr
obvious... Did you install any chinese fonts?
Another question is, are you running gnome 1 or gnome2? gnome2's
handling of international characters is pretty nice. And I haven't had
problems with mozilla handling foreign fonts recently. More problems
with encoding. Sometimes you
27;s kind of like the Windows IME.
On that's looking promising is the IIIMF, found at:
http://www.openi18n.org/subgroups/im/IIIMF/
There are packages in unstable.
Still kind of buggy with the Japanese server that I use (can't use space
in non-japanese mode), but it's looking better.
I guess the faster we move everyone to Unicode, the better...
Marshal
signature.asc
Description: This is a digitally signed message part
Hi Doug,
If you're dialing and connecting, it may not be the modem. What does your plog
say, assuming
you're using ppp?
Marshal
Doug Dine wrote:
> Hi All,
>
> Has anyone successfully gotten a PNP modem to work with Debian? I installed
> an older Hayes 33.6 PNP modem
;t been
asked 6 million times. Thanks!
Marshal
l)
unknown; sleeping for retry
Jul 11 23:57:15 ul sendmail[2344]: unable to qualify my own domain name
(ul) -- using short name
However, I have
127.0.0.1ullocalhost
in /etc/hosts.
So I'm at a lost. Any hints? Thanks!
Marshal
I suggest that you use xf86config. I find that this sets up the
/etc/X11/XF86Config file quite well. (I haven't used XF85Setup.)
You'll need to know your monitors scan rates and stuff, though. You
may have to fiddle with the /etc/X11/XF86Config after though to tweek
it optimally.
M
Could somebody send me the long listing of the root directory? I need
the proper permissions for /tmp since I fiddled around with it, and
now all the permissions are wrong. Thanks!
Marshal
cally, apt, does not seem to be able to find
the sites it needs if using http. Thus I have to use ftp. But if
there is a way to make all programs, or at least most, use the proxy,
that would be even better. Any suggestions?
Marshal
brought this up.), and
Metrowerks Codewarrior.
Anyways, any ideas would be appreciated.
Marshal
do it?
Marshal
I'm pretty sure that the version of mpg123 in unstable works with
esd. (I run it.) I also use 2.2.12, but I use the alsa-drivers.
Marshal
once a day.
Marshal
en running quite smoothly lately, since the upgraded
DHCPCD automatically updates IP addresses. Anyways, if anyone has any
clues, hints, suggestions, solutions, PLEASE let me know. If more
information is needed, let me know and I'll see what I can squeeze out
of tech support.
Thanks!
Marshal Wong
I really don't know where I should post this, but I guess here would
be as good as any. The latest procps package is overlapping with
bsdutils. Namely /bin/kill is overlapping.
Okay. Thanks.
Marshal
ither. documentation's a bit
sparce also.
Any help would be appreciated.
Marshal
ives me no error,
so I have no idea what's going on.
Any help would be appreciated. Thanks.
Marshal
> Best Regards,
> Ethan Benson
> To obtain my PGP key: http://www.alaska.net/~erbenson/pgp/
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
Try the Net Monitor Database.
http://www.griffintechnology.com/monitor.html
Marshal
d, by one end or the
other. PPPoE is going to be in
the 2.4 kernel, so if you're brave, you might want to try the 2.3 kernel.
So good luck.
Marshal
From: Uurcus the Swale <[EMAIL PROTECTED]>
Subject: Anybody from Canada here who use Sympatico ADSL
Date: Tue, 9 Nov 1999 23:00:26 -080
The Voodoo3 is supported by the X in potato. It's card 644 in the
card listings in xf86config. It works. Still a few funny things,
like leaving behind lines when moving windows in twm, or when using
the animated minimizing in Enlightenment, but besides that, it works.
Marshal
From: &q
x27;t
understand the control file. Any help would be appreciated.
Marshal
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
If I believe right, what was lp1 in the 2.0.x kernel is now lp0 in the
2.2.x. Does adjusting for this fix things? Also for IEEE-1284 to
work you need the printer on and the printer port must be ECP or EPP.
Hopefully this helps a bit.
Marshal
scribed to the debian-hurd list. I'm using exim. I can
receive mail, via fetchmail. Everything else works fine, www, ftp, ICQ. Just
not sending out.
Any help would be appreciated.
Marshal
Get free email and a permanent
From: "Dwayne C . Litzenberger" <[EMAIL PROTECTED]>
Subject: Re: Mail disappearing into the ether
Date: Mon, 15 Nov 1999 22:01:59 -0600
> Sorry if this isn't much help, but running eximconfig again might help.
>
> On Mon, Nov 15, 1999 at 07:51:10PM -0800, Marshal
ms No such file or directory
I have tons of space in /var. There are other .ksyms
in /var/log/ksymoops. I don't know why they can't be created now.
Thanks!
Marshal
running. I tried setterm -powersave off, but
under X it doesn't do anything. I'm using X under gdm.
Any suggestions?
Marshal
nged?
Any help would be appreciated.
Marshal
using the MacOS Remote
Access.
I'm connecting over a USB ISDN adapter using ACM. But I don't think this
the cause of the problem either, since when I try to connect with the built
in modem, I get the same results...
So, any help would be appreciated. Please CC me, as I'm not subscribed to
this list. Thanks in advance!
Marshal
> I've tried upgrading with apt-get, but it complains about too
> little space in /var. Will similar limitations arise with
> dselect ftp?
Yes, the same thing will happen, since dselect more or less uses apt.
You probably should link /var/cache/apt/archives to some bigger
partition.
Marshal
/mouse to /dev/gpmdata, and point XF86Config to /dev/mouse. Or
you can point XF86config to /dev/gpmdata directly. I think you have
to make gpm repeat in "raw" mode so the information from the mouse
isn't being filtered twice.
Hope that helps
Marshal
> Thanks for any help.
stoppers that I might have to know
about? I have to install GNU/Linux onto a professors computer
Monday, and was just wondering how much patience to take along. :)
I think that's it for now. Thanks in advance.
Marshal
to use svgalib. Not running in a
> graphics capable console, and unable to find one. svgalib:
> cannot get keyboard mode. Error: keyboard_init() failed
> [EMAIL PROTECTED]:~$
>From the error here, looks like you need to be in a console (not x), and as
root to run quake-3dfx, since it's using svgalib.
good luck.
Marshal
> Can someone set me on the proper path here?
> Kenward
> -- Unsubscribe? mail -s unsubscribe
> [EMAIL PROTECTED] < /dev/null
h 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "
I
don't want that domain to be treated locally since my prof has to sent
e-mails to his collegues. eximconfig does it this way, so any
messages sent to @po-box.mcgill.ca, bounce.
So if anyone has the quick and dirty, I'd greatly appreciate it.
Otherwise I have a lot of RTFMs to do. Thanks.
Marshal
h the web for "Net Monitor
Database". (I can't think of the address right now.) It should have
your monitor in it and all the infomation, especially the sync ranges.
Good Luck.
Marshal
> Thanks Jay
> -- Unsubscribe? mail -s unsubscribe
> [EMAIL PROTECTED] < /dev/null
1 - 100 of 226 matches
Mail list logo
