p
is Debian3.0 r1 with Gnome2.2.
Hoping any help,
Ali
debian:~# tethereal
Capturing on ppp0
0.00 169.158.160.135 -> ns1.sld.cu DNS Standard query A prox.sld.cu
0.014490 169.158.160.135 -> ns1.sld.cu DNS Standard query PTR
135.160.158.169.in-addr.arpa
0.322146 ns1.sld.cu -&
ip_conntrack_udp_timeout
sleep 10
echo $udpstimeout >
/proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout_stream
echo $udptimeout >
/proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout
done
ppp_ip_old=$ppp_ip
fi
done &
-snap-
hth,
ali
pgp2EFznSNXVq.pgp
Description: PGP signature
I didn't realize I was joining such a cool and active list so now I must
find a way to keep the emails organized.
Can someone tell me how to set up a simple filter in mozilla so that all
the mail I receive from debian-users list gets put in a folder. I was
going to set up the filter based on f
I didn't think this would work but i just used message contains. Still
would be interested in using a filter based on the reply to message info
but it doesn't show directly.
jeff
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED
ryan Ameri wrote:
On Thursday 12 June 2003 02:22, Jeff Ali wrote:
Can someone tell me how to set up a simple filter in mozilla so that
all the mail I receive from debian-users list gets put in a folder.
I was going to set up the filter based on from or subject but i don't
see anythin
"Hate is an expression best not expressed"
jBeatnik Cerca Today
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
e rights to.
But I, myself, am going to vote for Gandhi. The world is larger than
the United States, and his example is the one that has impressed me
most.
If we're talking pure *impact* value, of course, it's hard to go past
Lenin/Stalin, Mao and Hitler
ali.
Please, people, is there a debian-political mailing list where
posts that don't specifically relate to *using* debian could
be directed?
Threads that mainly consist of pointless pedantry or marketing
schemes could be profitably removed from this already high volume
mailing list, IMNSHO.
ali.
:)
n, and could
help, 'twould be much appreciated :) If someone else can
replicate it, I'll file it as a bug, but its probably just my
system.
ali.
ps: please Cc: messages to me as I'm only subscribed to the digest
version of this list :)
been preinstalled for me, Debian is certainly a breath
of fresh air in comparison :)]
TIA for any help!
ali.
t, because I'm relatively new to Linux;
but I did this last week and encountered these problems then :) (Of
course,
I'm getting a few annoying messages on booting 2.2.0-pre9 now that I'm
not sure how to fix :)
ali.
7;ve just messed it up, shouldn't the postinst script handle this?)
Or should I file this as a bug against the package?
Ali Graham.
--
/ I'm the '4' in "404 Not Found" /
y for
activating partitions or making a partition bootable etc.
Thanks,
Ali Kharaghani
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
a hard disk", for a Swap
partition.
The first partition is the boot manager by OS/2 and must be readonly.
Would this be a problem?
Is there any other way of installing Debian using floppy disks?
Thanks
Ali
--
From: Bob Nielsen[SMTP:[EMAIL PROTECTED]
Sent: June 19, 1997 7:44 PM
To:
a hard disk", for a Swap
partition.
The first partition is the boot manager by OS/2 and must be readonly.
Would this be a problem?
Is there any other way of installing Debian using floppy disks?
Thanks
Ali
--
On Thu, 19 Jun 1997, Kharaghani, Ali wrote:
> Bob,
>
> Thank you
Hi,
I would like to know, how can I install
debian on IBM eServer X336
series machine.
Thanks
Hi every one there,
Is any one tried to install Debian
on IBM Machine
Model: eServer
X336, I am unable to find the way how to install…
Thanks & Best Regards
article
http://www.aboutdebian.com/modems.htm
I don't need any user name and password to connect to my ISP. I am hearing the dial tone after giving the command
pon
but not able to connect internet. What could be the problem. Please help me out.
Regards
Ali
Do You Yahoo!? Yahoo! Small Business
Hi,
Thanks for your help. I used Knoppix to install Debian. Knoppix has its own utilities for Internet connections. I used it to configure my account. When I was using 115200, the modem was dialing but not connecting. But on reducing the rate to 52000, it connected on 2nd attempt. Now its working.
I've got an Opti 82C93 sound card, but I can't find the driver. I am running
Windows NT 4. can you tell me where I can download the right driver.
thanks for your help
Ali Balandy
Computer Support Technician
Information & Computing Services
Vancouver Community College
Tel:
dear sir
good day
please send me your catalogue BY POST if avilable to this address:
ATIF M ALI
AMWAJ MEDIA CENTER
P.O.BOX 2898
KHARTOUM 1
SUDAN
WITH COMPLIMENTS
أحصل على بريد الكتروني مجاني من http://www.ajeeb.com
whether
didnt find the CD-ROM or the LED of Drives light forever. Can I solve these
problems with your help or not?
I wait to receive your recommends and your guidance.
With the best wishes,
Ali
_
Get your FREE download of MSN
Hi
Do we know the purpose of the port number
TCP 2590 ?
Thanks
Mohammed Ali
using
WinEdt on Windows platform for long time and it included such tool.
Thank's in advance
Ali
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
dictionory
Sorry, command-not-found has crashed! Please file a bug report at:
http://www.debian.org/Bugs/Reporting
Please include the following information with the report:
command-not-found version: 0.3
Python version: 3.9.1 final 0
Distributor ID: Kali
Description:Kali GNU/Linux Rolling
Rele
llation is worthless...
--
With Regards Ali Jawad
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
s itself -- no actually it doesn't.
-- Hofstadter
___
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
With Regards Ali Jawad
--
To UNSUBSCRIBE, email to
s on booting. I know that I have booted a lilo
system using a grub floppy. I see no reason why the reverse wouldn't work.
A
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFea1kaIeIEqwil4YRAko4AKCff/oICHOu8G35lR9GNjVTeulAzACglaFx
6zdRErrlThZWNxuylUwnM00=
=pXUO
-END
How to boot into multiuser CLI mode then ?
On 12/8/06, Andrew Sackville-West <[EMAIL PROTECTED]> wrote:
On Fri, Dec 08, 2006 at 08:31:30PM +0200, Ali Jawad wrote:
> I really did not get what you want just a short explanation of run levels
> 0 shutdown
> 1 single user maintenance
ge-company/ and
/usr/local/com/large-company/branch1/ be used?
My understanding of FHS is that /usr/local/ is trully
for local host.
regards,
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
--
To UNSUBSCRIBE, email
Hi,
May I know where to find information about how to use
/etc/alternatives/ when developing a debian package?
regards,
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
--
To UNSUBSCRIBE, email to [EMAIL
nform that my package is
a "java" alternative which has the highest priority.
regards,
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of &q
bject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
--
With Regards Ali Jawad
IL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
With Regards Ali Jawad
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ecpp.sourceforge.net|
+-+
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
With Regards Ali Jawad
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> apt-cache search cobol
And how good is Open Cobol?
FYI: We still have a lot of Cobol applications that used
to run on AOS/VS (Data General). Those applications
were migrated Sun Solaris.
regards,
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engin
an hour compiling a few simple programs?
Well... our Sparc enterprise server is not that bad...
compared to the Data General MV/2 (AOS/VS).
But thank you for asking :).
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.o
Whenever I try to access CUPS webinterface I get the error resource
unaccessible...although...apache is running fine ..and the ports are
open
r."Where do I go to give myself permission?--Paul E Condon[EMAIL PROTECTED]
--To UNSUBSCRIBE, email to [EMAIL PROTECTED]with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]-- With Regards Ali Jawad
ce: :' : Debian User`. `'` & hemi-geek `-To UNSUBSCRIBE, email to
[EMAIL PROTECTED]with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
-- With Regards Ali Jawad
er place? Eg. /opt/hq/ and /opt/hg/branch/?
(3) Is it OK to use the /etc/alternatives directory for
altering the vi?
(4) Any suggestion?
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
Ubuntu User # 14458 - http://
How can I make new screenfulls of text get drawn instantly in a virtual
console, rather than having to wait for the text to scroll up. For example
when paging with less, I have to wait for the entire screen to scroll up
until I can read the new text, and this takes a long time when my cpu is
under
I can open x application (such as xterm or eog...) well.
However, from host B
| ssh -X A
I found there is no DISPLAY environment var,
Are you allowed to run X (e.g xlock) from B locally?
(i.e. without ssh to another host?).
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
ind what application to use as long as I will be able
to monitor my windows server from my windows box.."I prefer it not to be
a web-based application i.e. phpsysinfo, ntop".
So can anyone guide me to an application he tried..?
- --
With Regards
Ali Jawad Systems Developer/Linux
Yeah Ive checked out munin...but I really dont wana install a lamp
server just for that particular purpose..do you have any hints on the
snmp setup.
On 10/30/06, Daniel Graham Palmer <[EMAIL PROTECTED]> wrote:
Hi,
Why not install a snmpd and use one of the windows snmp clienty things?
I know yo
7 filtering setup and it worked
just fine for him..with links to tutorials if possible..
thx for any suggestions
- --
With Regards
Ali Jawad Systems Developer/Linux Admin
NOCC Network Operations & Consultancy Center
Address : Hamra - Bliss Str - Blue Bldg Office #704
Phone : +961-01-360087
Mo
Just a quick Question, why does apache have a shell in passwd file on debian ?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
The event "Read Well And Get Back to me" has changed.
New! = items changed by your host.
By your host Abu Ali:
Date: Monday December 15, 2008
Time: 9:00 am - 10:00 am (GMT +00:00)
Will you attend? RSVP to this invitation at:
On Tue, Mar 30, 2010 at 10:14 PM, Don Armstrong wrote:
> On Tue, 30 Mar 2010, ali amiri wrote:
> > I have a TOSHIBA Satellite U505-S2925BN laptap, after boot with Debian
> > testing and when i start laptap the CPU fan Cooling doesn't work in
> anytime,
> > laptap
us
version of a package?
thank you!
--
Raja Ali M.I. Ilias, Bengkalis,
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
My name is Ali, and I am a spoiled user of Debian.
Debian is smooth and fast.
Debian is sober and really what I expect from an operating system.
But, that's not why I write to you:
Since the "7.x" version does my computer freeze;
and that after installing "GRUB" an
Hi
i installed xen on debain 6.0 squeeze using "apt-get" but it is not booting.
can u plz let me know how to start with Xen on debain 6.0 sqeeze.
hi:
i have insalled Xen on debian 6.0.when i try to boot with 2.6.32-5-xen
kernel it gives me following error
ERROR: Unable to locate IOAPIC for GSI 2
ERROR: Unable to locate IOAPIC for GSI 9
Hi,
Just to need help for what concerning to build or/and install an older GCC on a
new Debian Distro (e.g 8.8 or 9.3)
The goal is to be able to compile and build binaries on the New Debian with an
older GCC to keep backcompatibility of binaries program previously built on
Debian 7 (32bits Whee
Hi All
I have a x86 Lenny servers and amd64 Etch servers. I am setting up
SNMP V3 on those servers I did run the following command on all
servers:
/etc/init.d/snmpd stop;net-snmp-config --create-snmpv3-user -ro -a MD5
-A XYZ ZXY;/etc/init.d/snmpd restart
Then I run the following test:
snmpget
> I wouldnt bother, try Ubuntu.
Ubuntu is great only if you have spare time.
I am on the way back to Debian too.
Unfortunately, stable means also ancient :(
--
Raja Ali M.I. Ilias, Bengkalis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
--
To UNSUBSCRIBE, email to debian-u
Avi Greenbury wrote:
> Ali Milis wrote:
>> Ubuntu is great only if you have spare time.
> Or if the defaults are acceptable to you.
ROFL, for years I tried to fantasize that Ubuntu is
defaults are acceptable.
> Personally, I find that Debian on laptops requires more time to set
&
Hi
I did install logcheck, did setup a cronjob, however all emails are sent to
logcheck at my domain.com.
I did change aliases and added
logcheck: m...@mydomain.com
and
logcheck: me
But it does not work the emails are still being sent out without the
destination being rewritten.
Please help
Respected Sir
Waqar ali from pakistan. little confusion about downloading iso
image of debian i386. tell me is debian on 7 dvds kindly tell me how to
download debian on 1 dvd waiting for your quick response
Yours Respectfully,
Waqar Ali
pakistan
www.pksharing.com
I have created multiple preseeds to install nodes using preseed and
ubuntu, and have worked without any problems, but with lenny I am
having a few issues. I hope someone on this list can help
Here are my steps
1. Copy CD 1 into a directory, which is available via httpd
2. Set-up PXE/tftp so that
On 12 October 2010 13:43, Arif Ali wrote:
> I have created multiple preseeds to install nodes using preseed and
> ubuntu, and have worked without any problems, but with lenny I am
> having a few issues. I hope someone on this list can help
>
> Here are my steps
>
> 1. Copy
On 14 October 2010 18:27, Arif Ali wrote:
> On 12 October 2010 13:43, Arif Ali wrote:
>> I have created multiple preseeds to install nodes using preseed and
>> ubuntu, and have worked without any problems, but with lenny I am
>> having a few issues. I hope someone
r disk goes old.
Did you know "SmartMontTools"?
regards,
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
> Why do people in the UK put a u in the word color?
Basbang! Hare genee masih ngomongin kolor ijo?!
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
Microsoft-free zone
Aha! Perhaps your signature does not match with msttcorefonts :)?
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
> How do you grow brocolli?
Read My Lips: Ask Dan Quayle!
--
Raja Ali M.I. Ilias, Bengkalis, https://wiki.ubuntu.com/AliMilis
Counted GNU/Linux Engineer # 405138 - http://counter.li.org/
Hi,
The default of gmail.com's "Reply-To: " is yourself.
If you do not like that, you need to click "Settings"
and fill "Reply-To: " with "< >". Do not forget that
there is a space between "<" and ">".
regards,
--
Ali Milis.
Uh-oh!
How to return bash as /bin/sh?
Why it is not in /etc/alternatives?
thank you
--
Ali Milis.
sion_ de mes salutations distinguées.
MR AYOUN MOHAMMED ALI
Age : 30 ANS
adresse :oran algeria
Mobil : 00.213.71.27.82.36
Fax : 00.213.41.46.80.44
Mail : [EMAIL PROTECTED]
Formation :
*bac série sciences 1992
*licence en sciences commerciales option mark
ur, l_expression_ de mes salutations distinguées.
MR AYOUN MOHAMMED ALI
Age : 30 ANS
adresse :oran algeria
Mobil : 00.213.71.27.82.36
Fax : 00.213.41.46.80.44
Mail : [EMAIL PROTECTED]
Formation :
*bac série sciences 1992
*licence en sciences commerciales option mark
Most of the new motherboards features such as:
CPU, mainboard temprature
CPU, power supply fan speed
Voltage level monitoring.
Guess it must be quite difficult to obtain a general purpose monitoring software
as the hardware implementation of such features seem to be motherboard
brand
I am using Debian Slink with Exim, configured for an Internet Site,
to receive and send mail using SMTP.
Everthing is configured using default configuration paraemeters.
That is relaying mail through smtp for nonlocal domains is disabled.
Now the question is wether Exim rejects smtp requests from
Thanks for those replies from Jor-el, Gregory and Martin.
But the solutions Jor-el and Gregory had proposed did not work for me,
so I has to the some RTFM.
THE PROBLEM
I installed netscape and was trying to configure mail.
I have exim installed and configured for internet site, uses SMTP.
I tried
Today I had to reboot my linux box by issuing CTRL-ALT-DEL
The system has suddenly become unresponsive while copying some
file from an smbfs mount point.
The following messages were displayed on the console over and over
again:
kernel: eth0: Transmit error, Tx status register 90
k
I am planning to enable anonymous ftp to my linux box.
I am aware of two alternatives: proftpd and wu-ftpd.
Any advantages of one over another?
TIA
I have an ASUS motherboard with on board AIC7890 SCSI controller.
Both, my hard disk and
CD ROM are SCSI. Is there a kernel that supports this device?
Sincerely,
Ali A. Kooshesh
[EMAIL PROTECTED]
The fully qualified name of my linux box is evolution.bilten.metu.edu.tr
Here is what I have in /etc/exim.conf
local_domains = localhost:evolution:evolution.bilten.metu.edu.tr
sender_host_reject_relay = *
sender_host_reject_relay_except = localhost
Hello.
I've got a running Debian Slink system, I've been using Debian since Hamm had
become stable.
Now that I have time for it, I would like to configure sound support. I have
Sounblaster 16 sound card that works properly under NT, which I use quite
rarely.
>From some of the postings to this
I have been using Linux for a year. I started with hamm and now I am using
slink.
I was running kernel 2.0.36 until last week.
Then decided it was the time to tackle sound config.
Then I realized it might had been a bit easier if I switched to 2.2 series
kernels.
Read a great deal of docs, installe
On Sat, 22 May, Graham Aston wrote:
On Friday 21 May, Dan Willard wrote:
> The route command now requires a netmask. Just add one in to both of the
> route commands and it should go away.
if you read the 2.2 docs in /usr/src/linux/Changes (or whatever it's
called) then you s
Roddie,
I've just configured my SoundBlaster Vibra 16pnp card on Friday.
I started off sending a posting to this newsgroup, compiled a 2.2 kernel,
read plenty of docs and manuals and if you have the some card that is
Vibra 16, than I guess you may be experiencing the same problems I have
experience
Hans van den Boogert wrote:
That explains something I experienced before. Thanks for the tip.
BTW, this pciutils package is not in the basic Debian 2.1 set up, yet with
every boot up the kernel invokes lspci, which is doesn't find of course. Is
this an oversight from the team who
On Mon, 24 May 1999, Ali Onur UYAR wrote:
> What this means is that, as the 16-bit dma channel you have to pass another
> 8-bit dma channel that is instead of passing irq 5,6,7 etc. you have to pass
irq
> 0,1,2,3
> At some point an error message is displayed, something similar t
I have an IDE ATAPI cdrom, it is /dev/hdb
I have created a soft link, that is /dev/cdrom that points to /dev/hdb
eject and workman do not work\ probably due to permissions of /dev/hdb
brwxrwx--x 1 root disk 3, 64 Mar 3 19:20 /dev/hdb
What is the correct way to solve this problem.
I had been using Debian since July of 1998. It had been a dual boot
NT/Debian Box. At the time of installation I remember selecting
something like 'Set HW Clock to Local Time'. Now that I've dumped NT
completely and I want to change it to 'HW Clock set to GMT' as I believe
that is the way UNIXish m
s incorrect.
This is purely FYI and is *my* observation alone -- so take it with as many
grains of salt as you see fit. I am informing people in order to save some
folks the hassels which i went thru -- i needed the very _latest_ Mach64 X
server!
regards,
ali
--
TO UNSUBSCRIBE FROM THIS MAILIN
s (as deb packages)
are easily available on the web anyway.
-ali
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Sending on Socket/eth0/unattached
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.16.160.1
bound to 24.201.179.32 -- renewal in 43200 seconds.
My /etc/network/interfaces file looks like:
iface lo inet loopback
iface eth0 inet dhcp
Any ideas what this is about?
Ali
--
We know
Try debian-hurd@lists.debian.org
or help-hurd@gnu.org
Visit the webpage
http://www.gnu.org/software/hurd/getting-help.html#contents
Ali.
On Sat, 22 Apr 2000, John Foster wrote:
> I am trying to locate mailing lists for Debian HURD users or an active
> news group?? Anyone know
tar (äh..which device ?) and also i downloaded
the free arkeia backup software.
but no hope to get it running :(
thx 4 ideas and help
cu ali
; e-mail communications through its networks.
>
> This mail has been checked for viruses by Symantec and Trend Micro.
--
Ali Alphan Bayazit <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ms to work well
> though I had no problems with 1.2 either. Anybody else using it?
>
> Anthony
>
>
> --
> [EMAIL PROTECTED]|| http://www.acampbell.org.uk
> using Linux GNU/Debian || for book reviews, electronic
> Windows-free zone || books and skept
e can anyone tell me what is happenning?
>
> Regards;
> Rituraj
>
>
>
>
>
> ___
> Do you Yahoo!?
> Declare Yourself - Register online to vote today!
> http://vote.yahoo.com
>
>
--
Ali Alphan Bayazit <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Thu, 2004-10-21 at 08:21 -0700, RituRaj wrote:
> Thanks a lot for the prompt reply :)
> I am still curious about my second observation...IF I
> just connect to www.salon.com through browserwhy
> so many IPs(unresolvable)?
>
> THanks
>
> --- Ali Alphan Bayazit <[EMAI
t; Li Zhao
> --
>
>
> H: http://lizhao.tk
>
>___
> /~\ _`\
> | | LiZhao |
> |_|__|
> || |__..--
> _|| |--""
>__..---""" ||
>
--
Ali Alphan
ate the source of the problem?
>
>
>
> On Fri, 22 Oct 2004 00:18:29 -0400, Ali Alphan Bayazit
> <[EMAIL PROTECTED]> wrote:
> > hi,
> >
> > have you tried installing libesd-alsa0,
> > or oss compatibility for alsa (alsa-oss)?
> >
> > aab
&g
her an
> xterm or, better yet, a remote ssh connection? I do a lot of hardware
> troubleshooting remotely via SSH and it would be a LOT easier if I could
> actually see the system messages that are being generated.
--
Ali Alphan Bayazit <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, emai
On Fri, 2004-11-05 at 12:54 -0700, Justin Guerin wrote:
> > 0 0 * * * root /usr/lib/cgi-bin/send_hit_count.cgi
> >
> Oops. Check out the man page for cron and especially crontab(5).
>
> > 1. send_hit_count.cgi apparently is not being executed. It works
> > interactively, but there are no messages
sions, you should
explicitly call chmod og-rxw (whatever), as cp sets the permissions
after file creation (effectively umask is ignored).
good luck,
--
Ali Alphan Bayazit <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Fri, 2004-11-12 at 21:06 -0600, downtime null wrote:
>
> mount: /dev/hdb1 already mounted or /other busy
>
> It also does not show up in dmesg. What could be causing this? What
> can
> I do to fix it?
>
try using /dev/evms/hdb1 instead of /dev/hdb1.
--
Ali Alphan Baya
1 - 100 of 106 matches
Mail list logo
