help

Hi this is rajesh i have a problem in linux, everytime i install linux , it starts in command prompt how can i start linux in gui mode my debian verson is sarge 3.1 please help me out i have just downloaded 16 cd's from your

Installation problem using iso dump on harddisk

-- With Regards From Rajesh Delhi 110 059 Sir, I cann't able to install debian 4.0 iso image with the help of Grub.

CVSup

Hi: I would like to know if you guys have a CVSup server that debian fans can connect to keep uptodate with the latest and greatest debian sources or distributions (or both)? Thanks rv -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PRO

Problem in starting X server

;t Connect errno=2 -X11TRANSSOCKETUNIXCONNECT:Can't Connect errno=2 -X11TRANSSOCKETUNIXCONNECT:Can't Connect errno=2 I am not able to figure out where the problem is. one more thing , How can I include the support of 3d glint permedia2 drivers in t

Re: Problem in starting X server

hi That's corrected my problem . Thanks a lot. I am facing one more problem i.e I am not able to configure my 3D GLINT PERMEDIA2 DRIVERS. How can I include the support for the same in xfree3.3.5 Thanks Rajesh At 09:51 AM 10/4/99 -0400, you wrote: This looks to me like you

problem in sendmail

[24598]: PAA24598: from=<[EMAIL PROTECTED]>, size=0, class=0, pri=0, nrcpts=0, proto=SMTP, relay=localhost [127.0.0.1] == Please email back to me with your suggestions.

Mem greater then 64MB

Hi I have got debian box with 96 Mb as ram . I am using LILO to boot in linux. But It always show me 64 mb ram with free command. what is the option to be added in lilo to make it read 96 mb ram. Please email me back with your suggestions. Thanks Rajesh

X server crashes....

ents Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages xinit: connection to X server lost.^M I don't know what to make of it. I have a Matrox Mystique (4MB) card. Any suggestions... Thanks Rajesh

Re: X server crashes....

rnel recently? Hi, I reinstalled the X binaries (X, XF86_SVGA) again. The new X server is running and I'm keeping my fingers crossed... :) I updated my kernel to 2.2.12 from 2.0.36 about a month ago. why? Thanks for your help. Rajesh

X server still crashes...

Hi, I reinstalled my X and XF86_SVGA binaries but my X server still crashes with "Signal 11" Segmentation fault(as I was told) I don't know how to check if my hardware is cause of the crashes.. Any suggestions... Rajesh

Off bit question

Hi friends , I am really sorry for posting an offbeat question on this mailing list. I want to give facility of dial in on my sun machine.I am using solaris 2.6 What all I have to enable it. Thanks a lot. Rajesh Mittal

At Wits end with X server crashing with Segmentation Fault!

Hi, I had posted the problem last week and someone had suggested that I reinstall the X binaries, which I did. But the problem persists and my X windows crashes with signal 11 error. Any suggestions? Rajesh

Compatible notebook

hi I am trying to buy a notebook , and I will be installing debian or free bsd on that. Has anybody got a suggestion about processor type , graphics card or n/w card. or as a whole . rajesh This is Linux Country. On a

Re: Debian Installation

You don't need the other 13. You just needed ~100Mb of the first cd. Then used apt-get for whatever you needed. If I had downloaded 14 cd's, then I would have 13 coasters (I'm on a fast connection.) Suggestion: Read up before doing something. It'll help your customers if you know. On 5/9/05, Yel

Problems rebooting after compiling a new kernel

Hi guys.. I'm having some weird problems when I try to reboot after compiling a kernel to suit my hardware. I've compiled linux kernels in debian several times before but I recently installed Debian Potato on a new intel box. In order to be as detailed as possible I've included some files at the

debian-user & digest

Regards -- Rajesh Fowkar /**\ * WebSite:http://rajesh.computers.webjump.com Email : [EMAIL PROTECTED] * Address:KURTARKAR NAGARI,BLDG-C,T4,3RD FLOOR,SHANTINAGAR,PONDA-GOA.(INDIA) * * "The expert at anything was o

apt-cache and search

Hi, If I do apt-cache search I get listing of packages available in apt cache. Suppose I want a filename search not package how this can be done. I want to find if the file I need is present in any of the packages in apt-cache. How this can be done ? Thanks in advance. Regards -- Rajesh

Re: apt-cache and search

ng fortune cookies fortunes-cs - Czech and Slovak data files for fortune. fortunes-it - Italian fortune cookies debian:/var/cache# - Is there any way I can find out without doing dpkg -L | grep fortune directly using apt-cache ? Reg

Re: apt-cache and search

Colin Watson saw fit to inform me that: >Rajesh Fowkar <[EMAIL PROTECTED]> wrote: >>If I do apt-cache search I get listing of packages available in >>apt cache. Suppose I want a filename search not package how this can be done. >>I want to find if the file I ne

Re: missing debian-user-digest list??

I also posted regarding the same problem yesterday, but nobody replied. Is List admin listening please ? Thanks a lot. Regards Rajesh Ibraheem Umaru-Mohammed saw fit to inform me that: >Hi, > >Does anybody have any idea what has happened to this list? I haven't >received

Re: Fw: difference b/w comipling kernel and source.deb

57 vmlinuz-2.2.17 My compiled kernel is : -rw-r--r--1 root root 689499 Feb 11 23:57 vmlinuz-2.4.0 See the difference in size :-) -- Rajesh Fowkar /**\ * WebSite:http://rajesh.computers.webjump.com

Re: sound ensoniq es1371

I don't use modules at all. > I am using es1371 module compiled with kernel 2.4 without any problems :-) Regards -- Rajesh Fowkar /**\ * WebSite:http://rajesh.computers.webjump.com Email : [EMAIL PRO

Mouse has a mind of its own...

Hi, I just installed Debian 2.2 (freeze). Everything is fine except the mouse which is moving very haphazardly ie. it moves very fast and doesn't go beyond the bottom of the screen. I can't use xmseconfig as I can't use the mouse on that window. Any suggestions Thanks in advance Rajesh

Re: X crashes when moving mouse

is my experienceUse this as your last resort if necessary, 'cause it was mine... -Rajesh On Sat, 12 Feb 2000, Marko Cehaja wrote: > I have Slink 2.1. > > When I start X, either via XDM or via startx, switch to konsole, switch back > to X and in the same time move my mou

No internet connection with 'frozen' and 2.2.14 kernel...

Hi, Someone had a similar problem, with 'frozen' and 2.2.14 kernel not recognizing the internet connection but the internet connection works with the 2.0.36 kernel. the internet connection doesn't work with 2.2.12 kernel either.. Any suggestions other than going to slink. Thanks Rajesh

RE: No internet connection with 'frozen' and 2.2.14 kernel...

me 'depmod' errors with all the '.o files' in the /lib/modules/2.0.36/pcmcia/ directory. Any suggestions. Rajesh On Mon, 14 Feb 2000, Pollywog wrote: > > On 14-Feb-2000 Rajesh Radhakrishnan wrote: > > Hi, > > > > Someone had a similar problem, with

RE: No internet connection with 'frozen' and 2.2.14 kernel...

internet connection. Thanks Rajesh On Mon, 14 Feb 2000, Pollywog wrote: > > On 14-Feb-2000 Rajesh Radhakrishnan wrote: > > Hi, > > > > I have an ethernet connection. I have a 3Com 595 card and use the > > 3Com59x.o driver module in linux. > > > >

How can go back to 'stable' from 'frozen'

e internet. I want to go back to 'stable' so that when I install 2.2.x so that the kernel recognises the dual processors and ethernet connection is up. Is there any way I can erase _all_ the current 'frozen' packages and install 'stable' using dselect or apt-get. Thanks Rajesh

depmod for 2.2.14 stills looks in /lib/modules/2.0.36/

Hi, Even after I upgraded the kernel to 2.2.14 from 2.0.36, bootup process gives me a slew of depmode errors for the modules in the /lib/modules/2.0.36 directory. Where can I make depmod check the /lib/modules/2.2.14 directory instead? Thanks rajesh

Is there a kernel-image-2.2.14 that is compiled with SMP on

Hi, I downloaded 'kernel-image-2.2.14.deb' after seeing someone post here. Unfortunately the newly installed kernel doesn't recognize the second processor. Is there another such kernel-image-2.2.14 with SMP on. thanks rajesh

3c59x.c and SMP

7; in 3c501,3c507,3c509 drivers $ grep spin_lock 3c*.c .. 3c509.c:spin_lock(&lp->lock); 3c509.c:spin_lock(&lp->lock); Any suggestions... Thanks Rajesh

Re: Is there a kernel-image-2.2.14 that is compiled with SMP on

or SMP machines I had posted this problem on this newsgroup couple of days ago, guess I am the only one who has this problem... :( Thanks Rajesh On Sun, 20 Feb 2000, Svante Signell wrote: > I think you have to compile it yourself. At least I had to do this to > make my SMP system work

Re: Blackdown's jdk1.2.2 v3 does not run....

/jdk1.2/bin to PATH and usr/jdk1.2/lib to CLASSPATH. I also removed my jdk1.1 installation. Hope this helps. ciao Rajesh

Problem with key not repeating on X

Hi, I just upgraded to potato and have a small problem... The key I press isn't repeated as I keep depressing it. I have to lift and press again. I have the same problem irrespective of whether I run fvwm95 or afterstep. Any suggestions? Thanks in advance. -Rajesh

Problem with Quake2

... Thanks Rajesh

Re: Blackdown's jdk1.2.2 v3 does not run....

ADME.linux. After reading your mail, realised that I forgot to mention that I upgraded to 2.2.12 kernel on my Pentium machine before I installed jdk-1.2v1 (2 weeks ago). I had no jdk-1.2v1 related problems when I switched to potato. Hope this helps. ciao Rajesh

Problems after upgrading to potato

get 'shmget failed' error in a couple of apps. How do I increase my shared memory? Thanks in advance. Rajesh

Error message when using 'apt-get'

> libg++.so.2.7.2.8 lrwxrwxrwx1 root root 20 Dec 27 10:39 /usr/lib/libstdc++.so.2. 7.2 -> libstdc++.so.2.7.2.8 Any ideas? -Rajesh

Unable to mount CD

22 1999 /dev/hdd I get the following error when I try to mount a CD, $ mount /dev/cdrom mount: wrong fs type, bad option, bad superblock on /dev/cdrom, or too many mounted file systems Any suggestions? Thanks Rajesh

Problem with xdoom

monitor at 1024x758 resolution. Thanks -Rajesh

Error mesg when using make-kpkg

debian/tmp-image chmod -R og=rX debian/tmp-image dpkg --build debian/tmp-image .. dpkg-deb - error: (upstream) version (`linux') doesn't contain any digits dpkg-deb: 1 errors in control file make: *** [kernel-image-deb] Error 2 Any suggestions Thanks Rajesh

rv50_redhat5xi386_rpm

Hi, Could anyone point me to a location where I can get this rpm file, rv50_redhat5xi386_rpm apt-get keeps asking for it every time I use apt-get. Thanks Rajesh

mailing list digest splitting

t the mails from Digest mode to individual mail after receiving the mail in digest format ? Thanks in advance. Warm Regards Rajesh [EMAIL PROTECTED] saw fit to inform me that: > >debian-user-digest Digest Volume 101 : Issue 160 > >Today's Topics: &g

Re: mailing list digest splitting - solved

Kenward Vaughan saw fit to inform me that: >On Fri, Jan 19, 2001 at 12:59:18AM +0530, Rajesh Fowkar wrote: >> Hi Kenward, >> >> Kenward Vaughan saw fit to inform me that: >> >Why not just get it in non-digest form? >> >> I will receive too many mai

Re: mailing list digest splitting

*Debian-user-digest.* >| formail +1 -ds >>/home/matias/mail/listas/debian-user > :0: * ^TOdebian-user | formail +2 -ds >> Today_debian works perfectly well. Thanks to all for the help. Regards -- Rajesh Fowkar /***

Re: Frequent download time outs

??? Presently I am using SuSE 7 and will be shifting to Debian soon. May be this week itself. Regards Rajesh Carl Johnson saw fit to inform me that: >[EMAIL PROTECTED] (Jeff Kelm) writes: > >> I am having trouble getting reliable downloads using Debian 2.2. After >> downlo

Re: mailing list digest splitting

Mark Mackenzie saw fit to inform me that: >Please ignore my last post. I used to use splitdigest and saved in >$HOME/user. procmail saves in $HOME/Mail/user as it should. > >On Sat, Jan 20, 2001 at 10:27:15PM +0530, Rajesh Fowkar wrote: >> :0: >> * ^TOdebian-user

Re: mailing list digest splitting

Mark Mackenzie saw fit to inform me that: >On Mon, Jan 22, 2001 at 09:38:30PM +0530, Rajesh Fowkar wrote: >> >Why do you skip 2 messages? >> >> In Digest mode you get first 2 messages which are the indexes of all the >> mails in that digest. > >Are you sure? I

Re: mailing list digest splitting

Mark Mackenzie saw fit to inform me that: >On Mon, Jan 22, 2001 at 09:38:30PM +0530, Rajesh Fowkar wrote: >> >Why do you skip 2 messages? >> >> In Digest mode you get first 2 messages which are the indexes of all the >> mails in that digest. > >Are you sure? I

Re: re CD-RW

gards Rajesh Jimmy Kaplowitz saw fit to inform me that: >What I do is have both ide-scsi and ide-cd as modules, and I pass >ignore=hdc as an option to ide-cd. (hdc is my CD-RW, not my regular CD-ROM) >Then when I subsequently load ide-scsi the cdrom is IDE and the cd-rw is >SCSI. (I

Re: Is the list broken?

received mails. Regards Rajesh

debian 2.2 release 3 and net connect

-- -- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://rajesh.computers.webjump.com Santacruz,Ponda-Goa-403401-INDIAPowered By : Debian GNU/Linux 2.2 R-3 Kernel

debian 2.2 rel 3 and wvdial

link /etc/resolv.conf which points to /etc/ppp/resolv.conf. Thanks in advance. Warm Regards -- -- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http

Re: debian 2.2 rel 3 and wvdial

Rajesh Fowkar saw fit to inform me that: >Hi, > >Since I installed debian 2.2 r.3 I am facing this problem. Earlier on 2.2 it >was >working fine. > >Problem is. I am using wvdial to connect to the net. >When I first time connect to the net using wvdial DNS is not

Re: reiserfs question

bad. tune2fs -i 0 -C 0 is what u need. However make sure that u run e2fsck on your ext2 partitions periodically. HTH Warm Regards -- ------ Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-

Re: How to install Linux source code - part 2

in /etc/apt/sources.list. Now u will be able to install from the CD's. HTH Warm Regards -- ------ Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://rajesh.computers.webju

Re: reiserfs question

on /dev/pts type devpts (rw,gid=5,mode=620) /dev/cdrom on /cdrom type iso9660 (ro,noexec,nosuid,nodev,user=rajesh) /dev/hda6 on /mnt/funstuff type vfat (rw,noexec,nosuid,nodev,errors=remount-ro) /dev/hda5 on /mnt/data type vfat (rw,noexec,nosuid,nodev,errors=remount-ro) /dev/hda1 on /mnt/windows t

Re: reiserfs question

mounted. -l list the contents of the filesystem superblock. -- Warm Regards -- -- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,B

reiserfs & mount

. If I put the following in /etc/fstab : /dev/hda9 /mnt/hda9 reiserfs defaults,errors=remount-ro 0 1 and try to mount I get the following : debian:/home/rajesh# mount /mnt/hda9 mount: wrong fs type

Re: reiserfs & mount

Karsten M. Self saw fit to inform me that: >on Wed, Aug 01, 2001 at 11:59:02PM +0000, Rajesh Fowkar ([EMAIL PROTECTED]) >wrote: >> Hi, >> >> A few days back I had downloaded the latest versions of linux-util and >> e2fsprogs >> since I converted my ext2 pa

Re: Framebuffer support in kernel

looks ugly :-) Thanks in advance. Warm Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.hserus.net/rajesh/ Santacruz,Ponda-Goa-403401-INDIAPowered By : Debia

Re: Choosing a Debian Variant

have a look at http://www.hserus.net/rajesh/ in case u are interested. ext3 is quite sturdy. No problems for me till now. The best thing about ext3 is that you can easily convert from ext2 to ext3 whereas for other file sytems the procedure will be take backup of existing partitions, recreate the partition

Re: Choosing a Debian Variant

em option. I have to apply the ext3 patch separatly :-) Warm Regards -- -------- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.hserus.net/rajesh/ Santacruz,Ponda-Goa-40340

Re: Choosing a Debian Variant

layer.deb etc. using checkinstall. Coool. Here is the link, try it out, u will never regret it : http://freshmeat.net/projects/checkinstall/ Bye bye. -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar

Re: Choosing a Debian Variant

e at >2.4.9pre?? and still no ext3 support... I've kinda lost >interest in having the latest and greatest kernel, so I'm >sticking with 2.4.7 until I have a good reason to upgrade. I always wonder why it takes so long for some patch which appears to be quite stable to be included

Re: File Manager for wmaker

hs now along with icewm as the Window Manager. rox-filer is lightweight with some cool features. http://rox.sourceforge.net Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4,

Re: X freezes (was XMMS hanging system?)

help me out ? Thanks in advance. Warm Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-Goa-403401-INDIAPowered By

Re: X freezes (was XMMS hanging system?)

928 on minor 63 Thanks in advance. Warm Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-Goa-403401-I

ext3 filesystem

Hi, Is there a possibility of the journal file of ext3 filesystem gettign corrupted ? If yes. Are there any tools to recover from such situation ? Thanks in advance. Warm Regards -- Rajesh Fowkar

Re: kernel 2.4.x

egards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-Goa-403401-INDIAPowered By : Debian GNU/Linux 2.2 R-3 Kernel 2.4.9(ext3), Mutt 1.3.20i, IceWM "Silence is the

Re: colors wrong with X4.0.3/testing

e >:-). Change your color depth in XF86Config-4 file to 16 instead of 8. Everything will work fine. Warm Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,

Re: Copying audio CDs on Debian

er I have not yet burnt any audio CD using gcombust. Try it out. Take Care -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-G

ext3 howto

Hi, I have posted a mini-howto from my experiences in converting from ext2 to ext3 file system on my Debian 2.2 R-3 machine. Do have a look at it and let me know if any corrections needed or something can be added to make it even better. My site address is : http://www.symonds.net/~rajesh

Re: ext3 howto

and you can say rather than the one page I have organised it a little bit. If this has hurt somebody than I apologise. Bye bye. -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~

Re: ext3 howto

Wayne Topa saw fit to inform me that: > Subject: ext3 howto > Date: Mon, Aug 27, 2001 at 11:16:28PM + > >In reply to:Rajesh Fowkar > >Quoting Rajesh Fowkar([EMAIL PROTECTED]): >> Hi, >> >> I have posted a mini-howto from my experiences in

Re: ext3 howto

Raghavendra Bhat saw fit to inform me that: >[Tue, Aug 28, 2001 at 01:49:46AM +0000] Rajesh Fowkar : > >> Hall Stevenson saw fit to inform me that: >> >You want to make sure that copying and pasting *most* >> >of your HOWTO from this page >> If this has hurt

Re: An MP3 player

eg. Less memory hungry. Excellent output. Regards -- -------- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-Goa-403401-INDIAPowered By : De

potato release 3 and dial-up user dns problem

ving email. Anybody faced the above problem ? What can I do so that dns works throughout without problems ? I have got proper dns entries in /etc/resolv.conf. (It works for the first time). Thanks in advance. Please cc the replies to me as I am not subscribed to the list due to heavy traffic. Peace

PPPoE connection problems with Debian Woody

Greetings, I'm having severe connection problems using my ADSL modem. I am using the following packages.. ppp_2.4.1.uus-1_arm.deb and pppoe_3.3-1_arm.deb and I am running the 2.4.16-rmk1 kernel. Whenever I issue the command 'pon dsl-provider' I get the following errors in /var/log/syslog .. pppd

Re: where is kde2.1 download for debian?

nformatik.rwth-aachen.de/pub/Linux/kde/stable/2.1/distribution/deb potato main Regards -- ------ Rajesh Fowkar[EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://rajesh.computers.web

ext3 patch for kernel 2.4.12

Hi, There is no patch for 2.4.12 for ext3 on the main site. http://www.uow.edu.au/~andrewm/linux/ext3/ Is ext3 included in linus's kernel in 2.4.12 ? Please cc your replies to me. I am not on the list. Thanks in advance. Peace -- Rajesh http://www.symonds.net/~rajesh/* Power

ipchains & home user

Hi, What is the minimum firewall that can be build & required for a home user ? On a dial-up line. Using ipchains. Thanks in advance. Warm Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurta

Re: ipchains & home user

Martin Feeney saw fit to inform me that: >On Thu, 30 Aug 2001 23:07:06 Rajesh Fowkar wrote: > >> What is the minimum firewall that can be build & required for a home user ? >> On a dial-up line. >> Using ipchains. > >apt-get install ipmasq > >It'l

Re: ipchains & home user

Warm Regards -- -------- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-Goa-403401-INDIAPowered By : Debian GNU/Linux 2.2 R-3 Kernel 2.4.9(ext3)

Re: Copying audio CDs on Debian

av make sure u have installed them. That's all. Enjoy. Warm Regards -- ---- Rajesh Fowkar [EMAIL PROTECTED] Kurtarkar Nagari,Bldg-C,T4, http://www.symonds.net/~rajesh/ Santacruz,Ponda-Goa-4

promise ultra ata100 controller card and linux support

Hi, I went through the kernel options but could not find support for promise ultra ata100 controller. (Promise Technologies). Is the above card supported under Linux ? Thanks in advance. Regards -- Rajesh Fowkar

Re: promise ultra ata100 controller card and linux support

>[*] PROMISE PDC202{46|62|65|67|68} support Thanks Jimmy. It's there. I went to Network Device Support -> Ethernet (10 or 100Mbit) and could not find the above card hence posted to the list. :-) Regards -- --------

Re: Offline APT

apt >ignores that directory and starts downloading the files from the ftp >servers again. > >Help! Why is apt doing this! Any suggestions? Ross. I also wanted to do similar thing and succeeded. I have written a small documentation of that on my web site. http://www.symonds.net/~rajesh

Re: Offline APT

e going to install deb using dpkg -i in a particular order than what is the difference between rpm and deb :-) OK. For installing just 1 package dpkg -i is ok. Regards -- -------- Rajesh Fowkar [EMAIL PR

Re: Installing vimtutor help file

ints went away. The weird thing was >it looked like vim used the .gz version even though it complained the >first time. On my debian 2.2 R3 box vim takes help.txt.gz and it itself does the gunzip. :-) Regards -- -

Re: Returned message - mailbox size exceeded - what's going on

? Regards Rajesh Mensagem Automatica da TERRA saw fit to inform me that: >Your message with subject [Re: Installing vimtutor help file] was not >delivered to the >following recipient: [heiliger]. This recipient's mailbox is full. > >Sua mensagem com assunto [Re: Installin

XFree86 4.1.0 with Potato & dri

# CONFIG_AGP_SWORKS is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set CONFIG_DRM_I810=y # CONFIG_DRM_MGA is not set Thanks in advance. Regards -- -----

Re: XFree86 4.1.0 with Potato & dri

Jon Masters saw fit to inform me that: >On 02 Sep 2001 02:32:12 +0000, Rajesh Fowkar wrote: > >> Any ideas what am I missing ? > >Do you have agpgart and other modules correctly inserted? sometimes >dependencies seem to miss-generated and fail to get the correct modules >

Re: Returned message - mailbox size exceeded - what's going on

Hall Stevenson saw fit to inform me that: >* Rajesh Fowkar ([EMAIL PROTECTED]) [010901 15:47]: > >> Today I am getting the following message for each mail I post to >> the debian-user list. What is this stuff. ? Anybody facing the same >> problem ? I am subscribed to

Re: XFree86 4.1.0 with Potato & dri

Jon Masters saw fit to inform me that: >On 02 Sep 2001 02:32:12 +0000, Rajesh Fowkar wrote: > >> Any ideas what am I missing ? > >Do you have agpgart and other modules correctly inserted? sometimes >dependencies seem to miss-generated and fail to get the correct modules >

Re: ot: vcd's on mtv

pment. It is due for release any time. Check out : http://192.190.173.45/homepage/news.html Enjoy Video Playback on Linux with mplayer. Regards -- Rajesh -- : [ Linux One Stanza Tip (LOST) ]### Sub : PGP sign out in mutt LOST #026 To sign

Re: [LIH] XFree86 4.1.0 with Potato & dri

Rajesh saw fit to inform me that: >On Wed, Sep 05, 2001 at 01:35:38PM -0700, Naren Devaiah wrote: > >>In your XF86Config file you must load the DRI module. Have you done that? >> >>In the Modules section, add >> >> Load "dri" > >Yes. T

lxdoom-x11 and music

could be wrong here ? Thanks in advance. Regards -- Rajesh -- [ Linux One Stanza Tip (LOST) ]### Sub : Linux Gazette LOST #059 Get your copy of Linux Gazette on the first of every month: #!/bin/bash ISSUE=61 #Note: Issue 61 was Jan

Re: [LIH] XFree86 4.1.0 with Potato & dri

>Rajesh saw fit to inform me that: > >However when I changed the order of 'dri' loading ( I made it as the first >module to be loaded), dri started working on my i810 :-) > >Section "Module" >Load"dri" >Load"ddc&q

udf & linux

Hi, Is there anybody who has tested success in reading, writing or reading/writing CD's burnt using DIRECT CD software from Windows. The CD is burnt in UDF format. I have compiled the kernel with UDF read support (as module). But when I mount the CD after loading the udf module, I get the follow

  1   2   >