On Tue, Nov 23, 1999 at 11:32:50PM -0800, John Miskinis wrote
> Hello,
>
> Ever since I installed enlightment (really cool), I get these
> errors whenever I install anything...
>
> Update-menus: (checking /var/lib/dpkg/lock)
>
> debian:/home/miskinis# In file "/etc/menu-methods//enlightenment" a
Suppose I must use C++, will it work with lesstiff? How difficult would it be
comparing to using lesstiff from a C prog?
BTW: Isn't lesstiff written in C++?
>
> Mike Werner wrote:
> >
> > I'm finally getting to the point with C that I plan on finally trying to
> > hack together a few small pro
On Sun, Nov 14, 1999 at 06:28:03PM +0100, Skynet wrote:
> 212.210.122.9 ???
= agmemnnone.penters.it
Shaul Karl wrote:
>
> Suppose I must use C++, will it work with lesstiff? How difficult would it be
> comparing to using lesstiff from a C prog?
> BTW: Isn't lesstiff written in C++?
>
I'm not really a C++ programmer (I've done a bit, but no GUI stuff) so I
don't know if you can use it with less
Hello all;
I'm trying to setup an old 386 to act as an xterminal, but am having
problems getting X to run. I've attached a log of what 'startx' reports
as it is a little long.
TIA,
Ron
--
=
= Ronald Burnett Farrer =
=
--
Sorry Shaul... I was thinking that you were the original poster (which
you aren't)
Matthew Dalton wrote:
>
> Didn't your original email say you were programming in C?
>
On Wed, Nov 24, 1999 at 05:14:47PM -0500, Brian White wrote:
> I installed the new telnetd (v0.14-8) in an upgrade from Slink, but every
> connection attempt failed until I modified /etc/inetd.conf to say "root.root"
> instead of "telnetd.telnetd".
>
> The user and group telnetd exist, and telnetd
On Wed, Nov 24, 1999 at 02:35:14PM -0800, aphro wrote:
> i had to to the same to get identd working ..not sure why ..
>
> let me know what u find out if its not posted to the list
Please explain what you mean by identd not working.
--
Debian GNU/Linux 2.1 is out! ( http://www.debian.org/ )
Email
On Tue, Nov 23, 1999 at 11:29:25PM -0600, ktb wrote:
> I'm getting these errors listed below. When these errors show up on my
> xconsole my screen is frozen for some time and then recovers. My X
>.
> Nov 23 23:08:19 xyf kernel: hdb: irq timeout: status=0xd0 { Busy }
> Nov 23 23:08:24 xyf ker
Jingsong Zhao wrote:
> I mail-ordered a XFree86-supported video card, yet I received a Jaton
> Video-68AGP card that uses RIVA128ZX chip. To my chagrin, I spent
> several hours figuring out that I have to download from nVidia a
> special XF86_SVGA and do some setups.
I have an ELSA VICTORY ERAZO
Hello,
Thanks. I did not know about the "menu" package. I just
upgraded it, and it appears to have fixed the problem. I had
1.5-17 and now have 2.1.4-2 , so you were correct. After apt-get
finished, I saw no errors like before.
I had commented out that line (12) yesterday, and it got another
identd would not reply to requests for ident. happened i believe after i
upgraded from hamm to slink. i believe slink by default set ident to user
nobody, and identd didnt work, i tried several different ident daemons and
all were the same, did not work..till i changed the user to root (had the
Hi all,
I wonder if there's a package with easy-to-use-and-powerfull database?
(something like dBase III+/IV)
Thanks in advance,
JY
--
Jean-Yves F. Barbier <[EMAIL PROTECTED]>
Ask not for whom the tolls.
> The quality of the encoder -engines- are in order:
>
> Fraunhoffer (spelling correct?)
> Xing
> ISO
Really? Dit you really try the ISO encoding model?
> However, the quality differences are only noticeable
> by -very- high trained professionals or with oscilloscopes.
To my grandmother, maybe.
On Thu, 25 Nov 1999 02:36:36 +0100
Jean-Yves BARBIER <[EMAIL PROTECTED]> wrote:
> Hi all, I wonder if there's a package with
> easy-to-use-and-powerfull database? (something like dBase
> III+/IV)
mySQL is more than fair.
--
J C Lawrence Internet: [EMAIL PROTECTED]
J C Lawrence wrote:
>
> Even better is to get rid of the .forward and have Exim recognise
> that you are using procmail as an LDA by inserting the following
> director and transport in exim.conf:
>
--- code snipped ---
Thanks. I decided to go the more elegant route. I'm getting an error
messag
hi
is there any way to sort and name the
files in a directory?
for example...the files are all
called like they have been downloaded...
now i want them to be like
"text01.txt" "text02.txt" etc...
how can i do that?
thx
Alexander P.
Barkey
G'day all,
I am trying to install the Frontpage extensions for apache
I haven't been able to get the install script to work so I have been hacking
it to bits.
however it seems that it gets stuck on the config file and I don' know
and can't find what exactly it is looking for/trying to do
I've just finished installing PHP4 and PHP4-MySQL. I added the module in
to apache...
LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
And now php files seem to get executed correctly. However, as soon as they
try to access a MySQL database, it appears the functions are not found:
Fat
On Thu, 25 Nov 1999 01:49:36 +
Mark Wagnon <[EMAIL PROTECTED]> wrote:
> J C Lawrence wrote:
>> Even better is to get rid of the .forward and have Exim
>> recognise that you are using procmail as an LDA by inserting the
>> following director and transport in exim.conf:
> Thanks. I decided t
The surest way to solve any problem is to ask a question about it...
Apparently it doesn't matter how long you sit on the question, either.
I waited over an hour, working on things, but 30 mins after I send the
question, I find that I need a 'dl("mysql.so")' in the code (found by
installing the php
On Wed, Nov 24, 1999 at 05:15:01PM -0800, aphro wrote:
>
> identd would not reply to requests for ident. happened i believe after i
> upgraded from hamm to slink. i believe slink by default set ident to user
> nobody, and identd didnt work, i tried several different ident daemons and
> all were
(how) can i power on a remote machine (via internet) using a modem ?
thanks
I am having problems with gnumeric. When I tried it for the first time
after making a full apt-get from the slink update of gnome packages, I
got
Unable to connect to UNIX socket /tmp/ .esd/socket
and afterwards a small window opened saying
unable to open module file :/usr/lib/gnumeric/plugins/libp
Thanks for the tips and pointers from everyone. I think I'm going to
start with lesstif and see what happens.
--
Mike Werner KA8YSD | "Where do you want to go today?"
ICQ# 12934898 | "As far from Redmond as possible!"
'91 GS500E|
Morgantown WV
# email4you: email-client + mailinglisten-manager #
Liebe(r) Interessent(in)!
email4you, das erfolgreiche Produkt des TB Posch, wird nun in der
brandaktuellen Version 1.2
angeboten. Es wurde eine bessere Versionstrennung zwischen
Express/Standard/Advanced/Professional
durchgeführt, die sic
On Wed, 24 Nov 1999, Alexander P. Barkey (hypnotic) wrote:
> i'm looking for a way to forward the email i receive on my linux server to my
> real email adress...
try creating a file called .forward in your home directory and in that ,
put in only the email address to which you want to forward to
I am trying to mount my internal CD-ROM.
When I use dmesg I get the following:
hdc: TOSHIBA CD-ROM XM-5702B, ATAPI CDROM drive
when I do a mount -t iso9660 -r /dev/cdrom /cdrom where /dev/cdrom is a
symbolic link to /dev/hdc, and /cdrom is an empty directory, I get the
following:
mount: wrong f
I don't know if this will help or not but if I put an audio CD into my
drive and use your mount command I get the same error. When I use a
Debian cd it mounts fine. Just a stab in the dark.
hth,
kent
"Jens K. Olsen" wrote:
>
> I am trying to mount my internal CD-ROM.
>
> When I use dmesg I ge
Marc-Adrian Napoli wrote:
> I basically commented out the little if/then loop that uses the
> sysklogd-listfiles command to see which log files to rotate.. it doens't
> work too well because you can only specify either --all, --auth,
> or --weekly.
>
> If you need more control (like i did) then yo
On Wed, Nov 24, 1999 at 12:03:57AM -0600, Chris Larson wrote:
> I have installed corel linux onto my laptop. Everything looks great and runs
> fine except for three things.
>
> 1. My ethernet card is not working. I can ping myself but I cannont ping
> anything else.
I have a Dell Latitude CPi A36
Hello,
For some strange reason wmakerconf now crashes just after
the window appears. I WAS running wmakerconf 1.7 and everything
was working OK. I didn't run it for about a week. All of a sudden
it would crash complaining about a GTK style copy problem, and a
NULL cast to a GTK widget.
Ea
Hi all,
I recently upgraded to potato, and just noticed thant I'm still using
the .95 version of mutt (potato has the 1.0 v.). I did and apt-get
update/upgrade and a bunch of packages are being held back. Is there a
way to get them to install via apt-get?
Thanks
--
On 25/11/99 Mark Wagnon wrote:
I recently upgraded to potato, and just noticed thant I'm still using
the .95 version of mutt (potato has the 1.0 v.). I did and apt-get
update/upgrade and a bunch of packages are being held back. Is there a
way to get them to install via apt-get?
did you try apt
Hi all,
I had a problem with my hard disk and somehow my potato system has
gotten hosed. Can someone tell me how to correct the following
problem?
chicago:~# dpkg -i /tmp/dpkg_1.4.1.19.deb
(Reading database ... 65879 files and directories currently
installed.)
Preparing to replace dpkg 1.4.1.19
Hi Gareth,
> I am trying to install the Frontpage extensions for apache
> I haven't been able to get the install script to work so I have been hacking
> it to bits.
>
> however it seems that it gets stuck on the config file and I don' know
> and can't find what exactly it is looking for/t
On Thu, 25 Nov 1999, Jens K. Olsen wrote:
> I am trying to mount my internal CD-ROM.
>
> When I use dmesg I get the following:
>
> hdc: TOSHIBA CD-ROM XM-5702B, ATAPI CDROM drive
>
> when I do a mount -t iso9660 -r /dev/cdrom /cdrom where /dev/cdrom is a
> symbolic link to /dev/hdc, and /cdro
Hi Jean-Yves,
So far as I know pretty much all the databases on Linux are client
server using SQL. So that's not quite the same as dbase which has an
integrated dbengine and language running on the client.
Probably the best known dbms' on Linux and MySql and Postgresql. They
each have pros and co
I just installed a Debian 2.1 stable machine.
Since it has a Token Ring adapter I skipped the "configure the network"
step during installation.
I have recompiled a kernel 2.2.13 and have tr0.
My /etc/init.d is missing the network script ... is there a source from
which I could get it/create it ???
On Wed, 24 Nov 1999, Brian White wrote:
> I've just finished installing PHP4 and PHP4-MySQL. I added the module in
> to apache...
>
> LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
>
> And now php files seem to get executed correctly. However, as soon as they
> try to access a MySQL d
On Wed, 24 Nov 1999, Peter S Galbraith wrote:
>> I want to produce some simple bar charts showing the difference between
>> different products. Gnuplot doesn't seem to be able to do what I want (just
>> nice clean bars with numbers at the tops and descriptions at the bottom).
>
>Ok, here's my shoo
Hi all,
I have 2 computers away 1 Km from each other and one PL (dedicated
telephony line between them) that I can use. What software and hardware I need
to connect the 2 computers using the PL?
Thanks, Paulo Henrique
--
Abraços,PH
Paulo Henrique Bap
On Fri, Nov 26, 1999 at 10:25:23AM -0200, Paulo Henrique Baptista de Oliveira
wrote:
> Hi all,
> I have 2 computers away 1 Km from each other and one PL (dedicated
> telephony line between them) that I can use. What software and hardware I need
> to connect the 2 computers using the P
It's a private line sold by a local TELCO. It's 64 kbs and pehaps it's
ISDN. pppd for the server? What about mgetty?
Quoting Andrei D. Caraman ([EMAIL PROTECTED]):
> On Fri, Nov 26, 1999 at 10:25:23AM -0200, Paulo Henrique Baptista de Oliveira
> wrote:
>
> > Hi all,
> > I have 2 c
When I use the command "su - username" for any user (root included)
I get the message in the subject ... what is it caused by ??
I am using Debian 2.1 with a few unstable packages, bash
Doing an sh -x of my .profile and .bashrc does not yeld any errors
Thank you. Bob Alexander
Thank you for asking!
No I have not received an answer except from a
person suggesting that I use it to take out all the
"yucky" packages like xbiff (he hates xbiff). But
other than that no. Do you have a suggestion? I would
really apperciate any help you can give me!
Hi,
Quoting Stephane Bortzmeyer ([EMAIL PROTECTED]):
> On Friday 26 November 1999, at 11 h 12, the keyboard of Paulo Henrique
> Baptista de Oliveira <[EMAIL PROTECTED]> wrote:
>
> > It's a private line sold by a local TELCO. It's 64 kbs and pehaps it's
> > ISDN. pppd for the server?
Hi
Some time ago, i was handed the administration of the local mail server.
Unfortunately this is just one of the many things I've got to do and as
such I've never had much time to look through the config's, especially
sendmail.
Today i received several messages indicating that the machine was us
For some of the wierd symbols, like card suits and lines and shapes, I
need to print ths to start it:
"\033[11m"
and thsi to stop it (so that keys display properly)
"\033[10m"
Is there a better way?
thanks,
--dave
On Thu, 25 Nov 1999, Andrei D. Caraman wrote:
>> I have 2 computers away 1 Km from each other and one PL (dedicated
>> telephony line between them) that I can use. What software and hardware I
>> need
>> to connect the 2 computers using the PL?
>
>Well, what bandwidth would you need on that l
> read /usr/share/doc/php4/README.Debian (you need to load the mysql module
> into php4)
Oh believe me, I read everything trying to find this. THe "README.Debian"
is far from helpful here...
==
php4 for Debian
--
How can i mount a portable parallel port cdrom on my linux box?
thanks evan
I am running a Debian 2.1 dist.
I was sent the following (appended) quite recent (a month old) CERT
advisory.
How do I understand which Debian packaging has closed these holes
BTW Is there a way to automate the PUT of files in the incoming area so
that every time one is performed root gets
Last year I loaded Debians on my box, but because of problems
connecting to the internet to complete the installation and the upcoming
planting season it has just been sitting there used. I returned to complete the
installation,but I can not get into the system. It will not accept the login a
Thus spake Robert J. Alexander ([EMAIL PROTECTED]):
> I am running a Debian 2.1 dist.
>
> I was sent the following (appended) quite recent (a month old) CERT
> advisory.
>
> How do I understand which Debian packaging has closed these holes
>
The latest wu-ftpd (2.6.0-2) in potato closes t
On 25/11/99 Woodrow Lovett wrote:
>Last year I loaded Debians on my box, but because of problems connecting
>to the internet to complete the installation and the upcoming planting
>season it has just been sitting there used. I returned to complete the
>installation,but I can not get into the syste
On Thu, 25 Nov 1999, Brian White wrote:
> > read /usr/share/doc/php4/README.Debian (you need to load the mysql module
> > into php4)
>
> Oh believe me, I read everything trying to find this. THe "README.Debian"
> is far from helpful here...
>
> ==
-BEGIN PGP SIGNED MESSAGE-
On Thu, 25 Nov 1999, Ethan Benson wrote:
> On 25/11/99 Woodrow Lovett wrote:
>
> >Last year I loaded Debians on my box, but because of problems connecting
> >to the internet to complete the installation and the upcoming planting
> >season it has just been sitti
Mario Jorge Nunes Filipe wrote:
>
> Hi
>
> Some time ago, i was handed the administration of the local mail server.
> Unfortunately this is just one of the many things I've got to do and as
> such I've never had much time to look through the config's, especially
> sendmail.
>
> Today i received
I have my SB32 autoconfigured by my BIOS, with sound support in my kernel,
how can I get the joystick port on my SB32 to work without turning off
auto-PNP in BIOS, and isapnp'ing it.
--dave
For some of the wierd symbols, like card suits and lines and shapes, I
need to print ths to start it:
"\033[11m"
and thsi to stop it (so that keys display properly)
"\033[10m"
Is there a better way?
thanks,
--dave
I just upgraded my computer from a 486 to a petiumIII450.
I moved the old disk to the new computer in order to move the linux
instelation. Linux came up mostly fine exept for two magor problems:
The mouse doesn't respond under X. I tried most protocolst that looked
remotly apropriate.
The mouse is
On Thu, 25 Nov 1999, Micha Feigin wrote:
> I just upgraded my computer from a 486 to a petiumIII450.
> I moved the old disk to the new computer in order to move the linux
> instelation. Linux came up mostly fine exept for two magor problems:
> The mouse doesn't respond under X. I tried most prot
I have a friend that has a simlar setup.
He use to use a isdn line for a 64 k access between his 2
networks. Now he has bought 2 hdsl modems and
has a 8 mb connection between the 2 offices. Only
gets 700 k / s connection.
Little slower then 10 mb ethernet.
Charles
www.theverge.com
On Fri, 26 Nov
> I recently upgraded to potato, and just noticed thant I'm still using
> the .95 version of mutt (potato has the 1.0 v.). I did and apt-get
> update/upgrade and a bunch of packages are being held back. Is there a
> way to get them to install via apt-get?
If a package is held back, I usually will d
The last couple times I've tried to do an apt-get dist-upgrade,
dpkg-preconfig failed. A quick search of package contents on
http://www.debian.org/distrib/packages (that is very convienient, I
appreicate it a lot) shows that the program dpkg-preconfig is part of the
package debconf. I go to /var
May be it would interest you:
http://www.conversant.com/
G.
> The .mc file has a line that says FEATURE(relay_based_on_MX)dnl and i
> believed that this would be enough...
I would have thought so. Are you running sendmail 8.9?
> Can
> someone please explain me how can i check if the relay is
On 11/25/99 12:18AM, Ethan Benson wrote:
>
> did you try apt-get dist-upgrade? or just apt-get upgrade?
>
Right after I installed slink from cd-roms I edited my sources.list
file and ran apt-get update/dist-upgrade. I ran apt-get update/upgrade
last night to bring my installatio up to snuff.
>
On 11/25/99 11:32AM, Bart Szyszka wrote:
> If a package is held back, I usually will do an apt-get install for it
> individually.
> Have you tried just doing an apt-get install mutt?
>
I'll try that and see what happens...
thanks
--
__ _
Mark Wagnon
On Wed, Nov 24, 1999 at 04:38:19PM +0100, 952618ae wrote:
> HELLO
>
> I wanted to ask if there was an adress where i could find the man pages
> as tekst
> and other info about how to use the commands like sort,cut,etc.
I think there's a man option that will let you output them in various
formats
Thanks I am in. I still have the old problem of downloading the packages
from debian.org. I get an error signal. should I attempt to fix the present
problem of connecting to my modem or order the CD's and load the packages
from them. I have a plug and play machine that came with windows only
machi
Hi all,
I finally managed to upgrade to patato over the weekend, 28hrs+ not
happy about the forthcomming
phone bill. :-(
Now I have a couple of problems. I installed something (don't know
what) that wanted to change the `ident' line in /etc/inetd.conf. Trouble
is it didn't because
Hi Everyone. . .
I think it's best to start off with the right question. I
have a network of about 25 computers, all on the same class C
(192.168.1.*). I have a Linux box, which is 192.168.1.1, and this
Linux box is going to be the default gateway of every other
machine in this network. S
greetings all:
i have a couple of questions i hope someone can answer for me.
to start: i have a sparc station and linux (debian 2.1, 2.0.35 kernel)
1st question - re: scsi
my system works pretty good. i am only curious as to why the sparc
scsi bus locates the internal system hard drive as ta
Has anybody been able to configure X 3.3.3 or 3.3.4
for Matrox G200 AGP with 8MB SDRAM at 1600x1200 16bpp
(monitor Iiyama 21", 27-110kHz, 50-160Hz) ?
With XF86Setup, the monitor and console freeze and I
even cannot switch to any virtual console.
Everything works fine at 1280x1024, or even with t
> > 3. My Gold card 56K modem will dial out but will not connect to my ISP. I
> > get the error that the pppd died unexpectedly.
>
Judging from the error message you're using kppp. Try to empty
/etc/ppp/config file. If that does not help, add -debug option to the pppd
in the kppp options panel,
You will probably have to do apt-get install after that. Just bare, it happened
to me
yesterday, and I did apt-get install by pure chance. It worked then. It
shouldn't
happen, I agree, lets hope it will be fixed. Please report if this works back
to the
list
Mark Wagnon wrote:
> On 11/25/99 12:
> "Luis" == Luis Gustavo Madrigal Salazar <[EMAIL PROTECTED]> writes:
Luis> Has someone successfully install NYS on debian?? Do you know
Luis> how to make it on Red-Hat 6.1?? In both cases I can see the
Luis> NIS+ tables, but I can't perform a login.
Have you read usr/doc/nis/nis.
I've been trying to contact someone at 3com who will actually admit to the
fact that their external serial modems even WORK with Linux.. I'm trying
to update my external x2 to v.90.
I was wondering if anyone on this list has done a firmware update on a
modem with a linux system, what companies ar
Hi there!
I've a little problem: a process (some diff) that just won't die.
I've tried
kill -s SIG
with SIG = 2,3,6,9,14 and 15 but it is still there.
This process accesses /mnt/md5/ and I cannot remount it ro. (I thought
I should always be allowed to rmount,ro something??)
Any ideas how I c
Dselect suggested the netstd package be removed, so I did this and it broke my
system by removing diald. I reinstalled diald and with it came other packages
containing "r" services, which I do not want. One of them, rsh-client, has a
dependency problem and cannot be installed. I don't even want
Will you pay us for making your job??
Your post is OFF TOPIC.
--
__
Felipe Alvarez Harnecker. QlSoftware.
Tel. 09.874.60.17 e-mail: [EMAIL PROTECTED]
Potenciado por Ql/Linux http://www.qlsoft.cl
__
On Thu, Nov 25, 1999 at 08:12:45PM +, Pedro Sanchez wrote:
> I can't find the subject software in the available Potato packages (not
> even in non-US). Where is this supposed to be?
You can't get this from debian or non-US. Only from Netscape if you live
in the US. However, the package fortify
On Thu, 25 Nov 1999, Neil D. Roberts wrote:
> Hi Everyone. . .
>
> I think it's best to start off with the right question. I
> have a network of about 25 computers, all on the same class C
> (192.168.1.*). I have a Linux box, which is 192.168.1.1, and this
> Linux box is going to be the d
> Sorry for the post I see there are a million messages about this in the
> archives. I just panicked. I am using a brand new IDE Western Digital
> HD (6.4 gig one) if anyone has any specific info about this HD and the
> error please let me know.
> Thanks,
> kent
>
You might try Western Digital
> "richard" == richard newton <[EMAIL PROTECTED]> writes:
richard> Hi all, I finally managed to upgrade to patato over the
richard> weekend, 28hrs+ not happy about the forthcomming phone
richard> bill. :-( Now I have a couple of problems. I installed
richard> something (don't k
> Where can I find a manual on Internet about compiling kernel's ?
Try the Kernel-HOWTO from www.linuxdoc.org.
On Thu, Nov 25, 1999 at 09:33:46PM +0100, Wojciech Zabolotny wrote:
> Hi all,
>
> I have problems with libapache-mod-python in Slink.
> I need to use the apache-ssl, but libapache-mod-python depends on apache,
> so I needed to install the standard apache as well (so I changed
> the non-ssl port fo
--- Begin Message ---
--- End Message ---
Hello there, i would like to get some help for the solution on design a
LAN network for a company which have the following situation : (the
design must suite it present and future need)
Company B have a main site on the outskirts of the city, with an
area of 6 areas, but, also have a small desig
Has someone successfully install NYS on debian?? Do you know how to make
it on Red-Hat 6.1?? In both cases I can see the NIS+ tables, but I can't
perform a login.
Hi. I have a linux box connected to internet thru ethernet..and my winbox
connected thru that to internet using ipmasq. Now ive been trying to run a
quake2 server..or any games server for that matter, not the point, on the
winbox and letting ppl externally connect to it. linuxbox has 10.1.1.1 ip on
Mine works fine at 1600x1200. Its an Nokia 446Xpro. My graphikcard is a
AGP Millenium 200 with 8 MB SDRAM. That is, for what I know, the G200 chipset.
I am runnnig xserver-svga 3.3.5.1. Cant say anything for 3.3.3 or 3.3.4 because
I just
tried this resolution to see the results on my machine.
My
If it's a ps2 mouse (smallish, round connector) use /dev/psaux.
--
++
| Eric G. Milleregm2@jps.net |
| GnuPG public key: http://www.jps.net/egm2/gpg.asc |
++
On 11/25/99 02:15PM, Antonio Rodriguez wrote:
> You will probably have to do apt-get install after that. Just bare, it
> happened to me
> yesterday, and I did apt-get install by pure chance. It worked then. It
> shouldn't
> happen, I agree, lets hope it will be fixed. Please report if this works
On Thu, Nov 25, 1999 at 12:07:57PM +0100, Ookhoi wrote:
> Hi Gareth,
> > Has anyone succesfuly install the extensions on a debian box befoe?
> > If someone has I would appreciate any help and or advice on the subject.
> I installed it on Solaris. Can you post your error messages and
> versions?
It
Try to search the web. If I am not mistaken there is a site in the UK with
this sort of info.
> HELLO
>
> I wanted to ask if there was an adress where i could find the man pages
> as tekst
> and other info about how to use the commands like sort,cut,etc.
>
>
>
> --
> Unsubscribe? mail -s un
I can't find the subject software in the available Potato packages (not
even in non-US). Where is this supposed to be?
Thank you,
--
Pedro
Dear Sirs:
I like the idea of the "Debian System" but I'm having trouble
installing it. At the moment I'm using SuSE 6.2, but I'd like to try
Debian.
I have an "Official 4CD" set, version 2.1r2 (Info-Magic). It would take
too much of your time to be soecific about my installation
1 - 100 of 108 matches
Mail list logo
