On Fri, Dec 08, 2000 at 10:13:09PM +0100, Kocsis István wrote:
> Dear Debian!
>
> Please help Me!
> Why can I install debian into my ultra/66 driver?
strange grammar...
look at http://www.linux-ide.org for more info about linux + udma
--
,---
Dear Debian!
Please help Me!
Why can I install debian into my ultra/66 driver?
Thank.
Istvan Kocsis
e-mail me your kernal as an attachment.
Thanks.
- Original Message -
From: "John B. Brodie" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, June 20, 2000 9:47 PM
Subject: RE: Get install to Recognize Hard Drive [attached to Promise Ultra
66]
>
This may not be of much help to you but here is my experience...
I have a Promise Technology Ultra 66 IDE controller card as a second
IDE controller on this machine (the first is the motherboard's old
built-in controller).
In order to get the kernel to recognize this new Promise Ultra 66 c
> "Adam" == Adam Di Carlo <[EMAIL PROTECTED]> writes:
Adam> [EMAIL PROTECTED] (Karl M. Hegbloom) writes:
>>> The bootfloppies for Slink don't handle UDMA66. You need to use
>>> bootfloppies with a kernel on them that's patched for UDMA66
>>> support (using the IDE patches from
[EMAIL PROTECTED] (Karl M. Hegbloom) writes:
>> The bootfloppies for Slink don't handle UDMA66. You need to use
>> bootfloppies with a kernel on them that's patched for UDMA66
>> support (using the IDE patches from
>> ftp.kernel.org:/pub/linux/kernel/people/hedrick/). I'm not sure if
>> potato's b
On Sun, Mar 19, 2000 at 02:02:11PM -0800, Brian Lavender wrote:
> Once again, how do you specify the CHS specs for cfdisk or fdisk?
You have to go into "Expert" mode. The command is 'x' with fdisk. I
don't remember for cfdisk.
--
++
| Eric G.
; > it again. I also have the patched lilo, so it can boot a raid device.
> > > > My current
> > > > problem is I can't get fmt to recognize the whole disk. When I start
> > > > format,
> > > > it sees the 20 Gigs, but it says the existing
ize the whole disk. When I start
> > > format,
> > > it sees the 20 Gigs, but it says the existing partition is exceeding the
> > > physical limits of the disk. In thought maybe I could just start adding
> > > partitions, but it seems that once I reach 2 Gigs
> "Ray" == Ray writes:
Ray> On Fri, Mar 17, 2000 at 21:32:35 -0800, Brian Lavender wrote:
>> but it just flashes the characters
>>
>> 2FA:
Ray> That's from the Master Boot Record program.
>> I also tried booting with a floppy with IDE support, but it won't
>>
On Sat, Mar 18, 2000 at 02:34:16PM +0100, J.H.M. Dassen Ray" wrote:
> On Fri, Mar 17, 2000 at 21:32:35 -0800, Brian Lavender wrote:
> > but it just flashes the characters
> >
> > 2FA:
>
> That's from the Master Boot Record program.
I guess you are correct about this, because I took the drive an
> From: J.H.M. Dassen (Ray) [mailto:[EMAIL PROTECTED]
> Sent: Saturday, March 18, 2000 6:34 AM
>
> On Fri, Mar 17, 2000 at 21:32:35 -0800, Brian Lavender wrote:
> > but it just flashes the characters
> >
> > 2FA:
>
> That's from the Master Boot Record program.
>
> > I also tried booting with a flop
It has been my experience that the
2FA:
prompt usually occurs when I have screwed up and have more than one partition
flagged as bootable. Does this seem to be the case for more people. or is the
2FA: prompt a kind of 'panic' message from the MBR?
On Sat, Mar 18, 2000 at 02:34:16PM +0100, J
On Fri, Mar 17, 2000 at 21:32:35 -0800, Brian Lavender wrote:
> but it just flashes the characters
>
> 2FA:
That's from the Master Boot Record program.
> I also tried booting with a floppy with IDE support, but it won't
> detect it either.
The bootfloppies for Slink don't handle UDMA66. You ne
Is anyone using the Promise Ultra66 controller with Linux?
I put my drive on it, and I get nothing when I boot
the machine. The card shows on the screen with the devices,
but it just flashes the characters
2FA:
on the screen. If I press return, it just repeats the characters. I
disabled my IDE c
15 matches
Mail list logo
