Re: Frequent freezing around login screens

On 27/03/2025 14:34, W. Pepperdine wrote: dmesg (http://paste.debian.net/1365575/) I am confused. I have impression that you described your trouble as rather severe freeze with no reaction on keyboard an mouse. Am I wrong? How have you managed to get dmesg output in that state? /var/log/kern

Email threading and display managers (was: Re: Frequent freezing around login screens)

On 29/03/2025 04:14, George at Clug wrote: I do not fully understand "email threading", even after reading up on it. I don't use email threading, and I do not think my email client does either. The message, I am replying to, have these headers, however References contains single Message-ID (f

Re: Frequent freezing around login screens

On 31/03/2025 23:29, W. Pepperdine wrote: Apologies for the poor email threading. There seems to be no way to do it from a browser interface. It is a known gmail web UI bug that clicking a reply button on the mailing list archive pages causes missed headers.

Re: Frequent freezing around login screens

In the end, I eliminated the freezing by replacing LightDM with GDM3. I still have no idea what the problem was with LightDM. I tested the RAM and put in a different HDD, but freezing was the same. Apologies for the poor email threading. There seems to be no way to do it from a browser interfac

Email threading (was Re: Frequent freezing around login screens)

Hi, On Fri, Mar 28, 2025 at 08:51:48PM -0400, Dan Ritter wrote: > The complete algorithm is here: > > https://www.jwz.org/doc/threading.html > > and is implemented in every good email client: there are no good > email clients which don't use it. It's a prerequisite to being > considered "good".

Re: Frequent freezing around login screens

George at Clug wrote: > I do not fully understand "email threading", even after reading up on it. I > don't use email threading, and I do not think my email client does either. > Thanks for pointing the matter of "email threading" out to me. This will be > some homework for me. email threadin

Re: Frequent freezing around login screens

Max, Thank you for your reply. I do not fully understand "email threading", even after reading up on it. I don't use email threading, and I do not think my email client does either. Thanks for pointing the matter of "email threading" out to me. This will be some homework for me. I am annoyed

Re: Frequent freezing around login screens

On 28/03/2025 05:13, George at Clug wrote: Max suggested checking with journalctl which may help, but I am thinking that if the computer is freezing, then nothing can get written to the logs anyway, so searching logs may not help. For example: # journalctl --priority=err --no-pager To be cl

Re: Frequent freezing around login screens

W. Pepperdine, Apologies, but I am mostly out of ideas. Hopefully people with more knowledge than myself will assist. I could not see any issues in the logs that you provided. I do not think your issue is with LightDM.  I still think it might be with hardware. Max suggested checking with jo

Re: Frequent freezing around login screens

First all, sorry for top posting. The original thread is in the cylindrical filing cabinet. I started my day by checking my always on desktop and found it to be frozen. At the time I was running KDE and VirtualBox (with a Trixie instance) amongst other things. This is of no great concern to me

Re: Frequent freezing around login screens

> Here are outputs of a few queries on log entries > from one of my XFCE installations. How do they compare > with your logs? Can you see any reports on your > computer that could point to what is causing your issue? After a system freeze, I rebooted to the desktop as root and collected these repo

Re: Frequent freezing around login screens

Thank you. I don't understand about the linux-image from backports. Would that be the same kernel that is in Trixie? I already tried that. If the problem is with the kernel configuration, is there any way to find the problem working on a single computer?

Re: Frequent freezing around login screens

On 27/03/2025 03:26, George at Clug wrote: I tried "$ journalctl | grep -i error" First of all, likely it should be "#", not "$" (run it as root: either sudo or su). Next journalctl --priority=err or journalctl --priority=warning instead of grep. However in the case of obscure is

Re: Frequent freezing around login screens

W. Pepperdine, Here are outputs of a few queries on log entries from one of my XFCE installations. How do they compare with your logs? Can you see any reports on your computer that could point to what is causing your issue? # lightdm --show-config [Seat:*] B greeter-session=lightdm-greeter

Re: Frequent freezing around login screens

Hi, Is anyone using similar hardware to Pepperdine ? If you are, do you have issues? Can anyone give useful suggestions where Pepperdine could start looking for issues? I tried "$ journalctl | grep -i error" and the output was not in a useful format on my computer for searching for issues.

Re: Frequent freezing around login screens

ср, 26 мар. 2025 г. в 07:09, W. Pepperdine : > > Debian+XFCE freezes randomly either just before, during, or a couple seconds > after the login screen. It happens about a third the time, both on booting > and on changing users. During a freeze, the screen displays but is not > updated and the US

Frequent freezing around login screens

Debian+XFCE freezes randomly either just before, during, or a couple seconds after the login screen. It happens about a third the time, both on booting and on changing users. During a freeze, the screen displays but is not updated and the USB ports appear inactive. There is no mouse or keyboard

Re: Black screens on old nVidia card

bother? >> It works well enough for my purposes.) > > How much is your time worth? Buying a new inexpensive card may be less > expensive than tracking this down. Maybe your local computer store > will lend you a test video card??? Perhaps. I went there after the vacuuming I men

Re: Black screens on old nVidia card

video card; I've always had a bit of trouble > with it, but things got better when I replaced nouveau with the > appropriate proprietary nVidia driver (currently version 390.157). > But lately things have been getting worse; it might be only minutes > before my screens go black, a

Re: Black screens on old nVidia card

On Wed, 12 Apr 2023 10:59:43 -0700 Charlie Gibbs wrote: > $ cat /etc/debian_version > 11.5 Hmm, the current version is 11.6. Maybe there's a fix in the upgrades you haven't yet installed??? > [ 1406.213319] NVRM: GPU at PCI::01:00: > GPU-d7903bd4-9549-9f07-5796-886c12d2031c > [ 1406.213322

Black screens on old nVidia card

got better when I replaced nouveau with the appropriate proprietary nVidia driver (currently version 390.157). But lately things have been getting worse; it might be only minutes before my screens go black, and the only way to get things back is to ssh in from another machine and force a re-boot, or rea

[SOLVED] Re: Openbox and multiple screens.

onfig/openbox/autostart for now. From: davidson Date: Mon, 18 Apr 2022 23:07:28 + (UTC) > As for which screen, see the section titled "DISPLAY NAMES" in the > same manual. Here display :0 spans the two screens. One display coordinate system can be used directly as above.

Re: Openbox and multiple screens.

On Mon, 18 Apr 2022 davidson wrote: On Sat, 16 Apr 2022 pe...@easthope.ca wrote: Hi, This system has two screens. https://wiki.debian.org/Openbox#Files lists ~/.config/openbox/autostart. Autostarting works except that I haven't found a way to configure the location or screen where

Re: Openbox and multiple screens.

On Sat, 16 Apr 2022 pe...@easthope.ca wrote: Hi, This system has two screens. https://wiki.debian.org/Openbox#Files lists ~/.config/openbox/autostart. Autostarting works except that I haven't found a way to configure the location or screen where a new window opens. How is that done?

Openbox and multiple screens.

Hi, This system has two screens. https://wiki.debian.org/Openbox#Files lists ~/.config/openbox/autostart. Autostarting works except that I haven't found a way to configure the location or screen where a new window opens. How is that done? Thx,

Re: XOrg issues with Rage 128 Ultra graphics: No screens found.

On 10/18/2021 07:50 PM, Alex McKeever wrote: > Essentially, my screen can be found (I have an iMac G3 in which I’ve ran Sid > on)… however it can’t find any usable configurations, and manually generating > an XOrg configuration (editing it to give certain options) doesn’t help. Is > this an XOrg

XOrg issues with Rage 128 Ultra graphics: No screens found.

Essentially, my screen can be found (I have an iMac G3 in which I’ve ran Sid on)… however it can’t find any usable configurations, and manually generating an XOrg configuration (editing it to give certain options) doesn’t help. Is this an XOrg, driver, or kernel issue? I’d like to know as this

Re: Debian 10.6 boots to black screen; “no screens found(EE) in log”

On 15.08.21 15:46, Andrew M.A. Cater wrote: I would suggest installing Debian 11 - just released - for two reasons: Yes working with Bullseye. happy weekend Evelyn OpenPGP_0x61776FA8E38403FB.asc Description: OpenPGP public key OpenPGP_signature Description: OpenPGP digital signature

Re: Debian 10.6 boots to black screen; “no screens found(EE) in log”

On Sun, Aug 15, 2021 at 01:21:24PM +0200, Evelyn Pereira Souza wrote: > On 15.08.21 10:52, to...@tuxteam.de wrote: > > You also have a "2019 5k iMac"? Because that is very important in this > > context. > > Here more details about my HW: > > # inxi -Fxz > System:Host: norp Kernel: 4.19.0-17-a

Re: Debian 10.6 boots to black screen; “no screens found(EE) in log”

On 15.08.21 10:52, to...@tuxteam.de wrote: You also have a "2019 5k iMac"? Because that is very important in this context. Here more details about my HW: # inxi -Fxz System:Host: norp Kernel: 4.19.0-17-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 Console: tty 0 Distro: Debian

Re: Debian 10.6 boots to black screen; “no screens found(EE) in log”

On 15.08.21 10:52, to...@tuxteam.de wrote: On Sun, Aug 15, 2021 at 10:34:05AM +0200, Evelyn Pereira Souza wrote: Hi https://unix.stackexchange.com/questions/616926/debian-10-6-boots-to-black-screen-no-screens-foundee-in-log same problem like this guy, but sadly no anser. You also have a

Re: Debian 10.6 boots to black screen; “no screens found(EE) in log”

On Sun, Aug 15, 2021 at 10:34:05AM +0200, Evelyn Pereira Souza wrote: > Hi > > https://unix.stackexchange.com/questions/616926/debian-10-6-boots-to-black-screen-no-screens-foundee-in-log > > same problem like this guy, but sadly no anser. You also have a "2019 5k iMac&qu

Debian 10.6 boots to black screen; “no screens found(EE) in log”

Hi https://unix.stackexchange.com/questions/616926/debian-10-6-boots-to-black-screen-no-screens-foundee-in-log same problem like this guy, but sadly no anser. Please help me. kind regards Evelyn OpenPGP_0x61776FA8E38403FB.asc Description: OpenPGP public key OpenPGP_signature Description

[SOLVED] Re: [Buster]: Can't start X: no screens found(EE)

Aug 27, 2018, 12:35 PM by mrma...@earthlink.net: > These suggest you are missing a firmware package for your Radeon HD 4200. > firmware-linux & firmware-linux-non-free are meta packages. Likely you only > need > firmware-amd-graphics and/or firmware-linux-free and/or firmware-misc-nonfree. > "fi

Re: [Buster]: Can't start X: no screens found(EE)

On Mon, 27 Aug 2018 18:07:18 +0200 (CEST) local10 wrote: > Hi, > > Am trying to upgrade a Debian Wheezy PC to Buster. The PC was > successfully running Wheezy with KDE as desktop, in terms of hardware > there are no changes. Initially, sddm was intalled to start KDE but > that did not work for s

Re: [Buster]: Can't start X: no screens found(EE)

local10 composed on 2018-08-27 18:07 (UTC+0200): > # grep "(EE)" .local/share/xorg/Xorg.0.log > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [  1102.702] (EE) open /dev/dri/card0: No such file or directory > [  1102.702] (EE) open /dev/dri/card0: No such file or directory > [  1

Re: [Buster]: Can't start X: no screens found(EE)

102.720] (II) Module int10: vendor="X.Org Foundation" [ 1102.720]compiled for 1.20.1, module version = 1.0.0 [ 1102.720]ABI class: X.Org Video Driver, version 24.0 [ 1102.720] (II) VESA(0): initializing int10 [ 1102.721] (EE) VESA(0): Cannot read int vect [ 1102.721] (II) Unl

[Buster]: Can't start X: no screens found(EE)

) Screen(s) found, but none have a usable configuration. [  1102.721] (EE) [  1102.721] (EE) no screens found(EE) [  1102.721] (EE) [  1102.721] (EE) Please also check the log file at "/home/izavialo/.local/share/xorg/Xorg.0.log" for additional information. [  1102.721] (EE) [  1102.723] (E

Re: 3 screens

On Sunday 01 April 2018 10:41:12 mess-mate wrote: > On 04/01/18 16:12, mess-mate wrote: > > Hi, > > I've 3 working screens and my mouse can access only 2 of them. > > GPU=nvidia geforce gtx970. > > regards > > Ok... SOLVED/Found But how did you solve it, so

Re: 3 screens

On 04/01/18 16:12, mess-mate wrote: Hi, I've 3 working screens and my mouse can access only 2 of them. GPU=nvidia geforce gtx970. regards Ok... SOLVED/Found

3 screens

Hi, I've 3 working screens and my mouse can access only 2 of them. GPU=nvidia geforce gtx970. regards

Re: 3 screens do it work + 2 gpu's

Op Thu, 21 Jan 2016 20:52:57 +0100 schreef mess-mate-gmx : oeps Hi, i have 3 screens, 2 on a geforce 9800GT. The other screen (n°3) is connected to a graph.card with a geforce gt 730. This screen is seen by nvidia but is disabled and enabling result in a black one. There are multiple

3 screens do it work + 2 gpu's

oeps Hi, i have 3 screens, 2 on a geforce 9800GT. The other screen (n°3) is connected to a graph.card with a geforce gt 730. This screen is seen by nvidia but is disabled and enabling result in a black one. There are multiple nvidia packages in jessie, what one do i install to run also my

3 screens do it work + 2 gpu's

Hi, i have 3 screens, 2 on a geforce 9800GT. The other screen (n°3) is connected to a graph.card with a geforce 7130. This screen is seen by nvidia but is disabled and enabling result in a black one. There are multiple nvidia packages in jessie, what one do i install to run also my 3d screen

Re: Xorg -configure fails with "created screens does not match number of detected devices"

On 05-04-2015 00:08, Ric Moore wrote: On 04/03/2015 09:34 AM, David Wright wrote: Quoting venkat (venka...@vortexindia.co.in): Tried various options today and finally modified xorg.conf with below settings made my X server start with multiple displays enabled. Section "Device" Identifier

Re: Xorg -configure fails with "created screens does not match number of detected devices"

or message. "created screens does not match number of detected devices" Xorg -configure http://pastebin.com/G7sFuRYN xorg.0.log : http://pastebin.com/68WQ8Zfv My requirement does not even worry about screen resolution all i wanted is to control my X display like on/off lspci info :

Re: Xorg -configure fails with "created screens does not match number of detected devices"

On 05-04-2015 00:08, Ric Moore wrote: On 04/03/2015 09:34 AM, David Wright wrote: Quoting venkat (venka...@vortexindia.co.in): Tried various options today and finally modified xorg.conf with below settings made my X server start with multiple displays enabled. Section "Device" Identifier

Re: Xorg -configure fails with "created screens does not match number of detected devices"

On 04/03/2015 09:34 AM, David Wright wrote: Quoting venkat (venka...@vortexindia.co.in): Tried various options today and finally modified xorg.conf with below settings made my X server start with multiple displays enabled. Section "Device" Identifier "Intel GMA3600" Driver "modesetting"

Re: Xorg -configure fails with "created screens does not match number of detected devices"

Quoting venkat (venka...@vortexindia.co.in): > Tried various options today and finally modified xorg.conf with below settings > made my X server start with multiple displays enabled. > > > Section "Device" >   Identifier "Intel GMA3600" >   Driver "modesetting" >   BusID "PCI: 0: 2: 0 >   Option

Re: Xorg -configure fails with "created screens does not match number of detected devices"

when GDM starts i just see a blank screen.. Switch back to tty1, kill gdm and start the X server with startx Yes i tried that and i get an error: no screens found [21.958] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [21.959] (II) Module mod

Re: Xorg -configure fails with "created screens does not match number of detected devices"

venkat wrote: > [ 21.967] (EE) Screen(s) found, but none have a usable configuration. I had same message recently when I moved wheezy (the hard disk with the system) to a new hardware. It turned out the Xorg server version did have poor support for the new hardware in wheezy, so either compile ne

Re: Xorg -configure fails with "created screens does not match number of detected devices"

t;Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection The system boots but when GDM starts i just see a blank screen.. Switch back to tty1, kill gdm and start the X server with startx Yes i tried that and i g

Re: Xorg -configure fails with "created screens does not match number of detected devices"

e "Monitor Model" EndSection The system boots but when GDM starts i just see a blank screen.. Switch back to tty1, kill gdm and start the X server with startx Yes i tried that and i get an error: no screens found [21.958] (II) Loading /usr/lib/xorg/modules/drive

Re: Xorg -configure fails with "created screens does not match number of detected devices"

Op Thu, 02 Apr 2015 12:04:32 +0200 schreef venkat : On 02-04-2015 15:31, Floris wrote: Op Thu, 02 Apr 2015 11:47:20 +0200 schreef venkat : On 02-04-2015 15:10, Floris wrote: Op Thu, 02 Apr 2015 11:22:16 +0200 schreef Venkat Ragavan Swaminathan : Posted lsmod info : http://pastebi

Re: Xorg -configure fails with "created screens does not match number of detected devices"

On 02-04-2015 15:31, Floris wrote: Op Thu, 02 Apr 2015 11:47:20 +0200 schreef venkat : On 02-04-2015 15:10, Floris wrote: Op Thu, 02 Apr 2015 11:22:16 +0200 schreef Venkat Ragavan Swaminathan : Posted lsmod info : http://pastebin.com/Y79th67k The right diver is loade

Re: Xorg -configure fails with "created screens does not match number of detected devices"

Op Thu, 02 Apr 2015 11:47:20 +0200 schreef venkat : On 02-04-2015 15:10, Floris wrote: Op Thu, 02 Apr 2015 11:22:16 +0200 schreef Venkat Ragavan Swaminathan : Posted lsmod info : http://pastebin.com/Y79th67k The right diver is loaded (gma500-gfx) but Xorg doesn't fully use it. Backup u

Re: Xorg -configure fails with "created screens does not match number of detected devices"

Op Thu, 02 Apr 2015 11:40:56 +0200 schreef Floris : Op Thu, 02 Apr 2015 11:22:16 +0200 schreef Venkat Ragavan Swaminathan : Posted lsmod info : http://pastebin.com/Y79th67k The right diver is loaded (gma500-gfx) but Xorg doesn't fully use it. Backup up your Xorg.conf file and create a new

Re: Xorg -configure fails with "created screens does not match number of detected devices"

On 02-04-2015 15:10, Floris wrote: Op Thu, 02 Apr 2015 11:22:16 +0200 schreef Venkat Ragavan Swaminathan : Posted lsmod info : http://pastebin.com/Y79th67k The right diver is loaded (gma500-gfx) but Xorg doesn't fully use it. Backup up your Xorg.conf file and create a new one with only

Re: Xorg -configure fails with "created screens does not match number of detected devices"

Op Thu, 02 Apr 2015 11:22:16 +0200 schreef Venkat Ragavan Swaminathan : Posted lsmod info : http://pastebin.com/Y79th67k The right diver is loaded (gma500-gfx) but Xorg doesn't fully use it. Backup up your Xorg.conf file and create a new one with only Section "Device" Identifier "gma500

Re: Xorg -configure fails with "created screens does not match number of detected devices"

el with wheezy.But, when >> i try to run Xorg -configure , it exits with an error message. >> "created screens does not match number of detected devices" >> >> Xorg -configure http://pastebin.com/G7sFuRYN >> >> xorg.0.log : http://pastebin.com/68WQ8Zfv >&

Re: Xorg -configure fails with "created screens does not match number of detected devices"

ed me that possibility of achieving with 2.6.32 is ZERO. . Now the board has been updated with 3.4.106 kernel with wheezy.But, when i try to run Xorg -configure , it exits with an error message. "created screens does not match number of detected devices" Xorg -configure http://pastebin.

Xorg -configure fails with "created screens does not match number of detected devices"

Now the board has been updated with 3.4.106 kernel with wheezy.But, when i try to run Xorg -configure , it exits with an error message. "created screens does not match number of detected devices" Xorg -configure http://pastebin.com/G7sFuRYN xorg.0.log : http://pastebin.com/68WQ8Zfv My

Greyed Out Icons in Jessie Gnome All Applications Screens

How can I get rid of them? These greyed out icons appear along with real program icons, but they are not programs. Most are related to screen savers. I do not use a screen saver. Tom -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Co

Freezing screens while using multiple LCD screens

Hello, I'm having problems with multiple LCD screens. While using 2 LCD one screen goes dark every 6 second for 400 ms, while other freez for 400 ms. When using only one LCD and go restart the OS every thing runs smooth. When I'm using second LCD with my laptop I dont have this probl

Re: Radeon, KMS, OpenGL and black screens

On Wed, 28 Dec 2011, Camaleón wrote: > On Thu, 22 Dec 2011 23:51:43 +0100, Andre Majorel wrote: > > As far as I can tell, enabling KMS causes the screen to go black shortly > > after "ib test succeeded in 0 usecs" and disabling it prevents hardware > > 3D acceleration. > > > > Any ideas ? Yes, drm

Re: Radeon, KMS, OpenGL and black screens

On Thu, 22 Dec 2011 23:51:43 +0100, Andre Majorel wrote: > As far as I can tell, enabling KMS causes the screen to go black shortly > after "ib test succeeded in 0 usecs" and disabling it prevents hardware > 3D acceleration. > > Any ideas ? Yes, drm, drm_kms_helper and radeon are loaded before st

Radeon, KMS, OpenGL and black screens

As far as I can tell, enabling KMS causes the screen to go black shortly after "ib test succeeded in 0 usecs" and disabling it prevents hardware 3D acceleration. Any ideas ? Yes, drm, drm_kms_helper and radeon are loaded before startx and no, it's not new hardware (RV370). Thanks in advance. --

Re: Ncurses for touch screens?

On 05/27/2011 07:36 PM, Nick Lidakis wrote: On Wed, May 25, 2011 at 10:35:24AM +0100, Darac Marjal wrote: /snip/ Thanks for the advice. I did find a used O'Reilly book called Learning Python. Also, there is something called python-mpd client library in the Debian repository and I found a prog

Re: Ncurses for touch screens?

On Wed, May 25, 2011 at 10:35:24AM +0100, Darac Marjal wrote: > On Tue, May 24, 2011 at 08:55:36PM -0400, Nick Lidakis wrote: > > I was wondering if there was some kind of ncurses application or utility > > that > > would let you define simple ASCII buttons and when that button was pressed > > us

Re: Ncurses for touch screens?

2011/5/25 Nick Lidakis > I was wondering if there was some kind of ncurses application or utility > that > would let you define simple ASCII buttons and when that button was pressed > using gpm or a touchscreen it would run a simple command. I tried searching > with apt-cache but nothing showed u

Re: Ncurses for touch screens?

On Tue, 24 May 2011 20:55:36 -0400, Nick Lidakis wrote: > I was wondering if there was some kind of ncurses application or utility > that would let you define simple ASCII buttons and when that button was > pressed using gpm or a touchscreen it would run a simple command. I > tried searching with

Re: Ncurses for touch screens?

On Tue, May 24, 2011 at 08:55:36PM -0400, Nick Lidakis wrote: > I was wondering if there was some kind of ncurses application or utility that > would let you define simple ASCII buttons and when that button was pressed > using gpm or a touchscreen it would run a simple command. I tried searching >

Ncurses for touch screens?

I was wondering if there was some kind of ncurses application or utility that would let you define simple ASCII buttons and when that button was pressed using gpm or a touchscreen it would run a simple command. I tried searching with apt-cache but nothing showed up; nothing using Google either. I

Re: color temperature of screens // dual screen

Le 25/08/2010 à 00:27, Jordon Bedwell a écrit : > > On 8/24/2010 4:40 PM, Alain Baeckeroot wrote: > > I have a laptop with warm colors (i guess near 5000 K) and an > > additional screen with 6300 K (or 9000 K) > > > > Is there a way to configure Xorg in order to see the same thing > > on both s

Re: color temperature of screens // dual screen

On 8/24/2010 4:40 PM, Alain Baeckeroot wrote: Hi I have a laptop with warm colors (i guess near 5000 K) and an additional screen with 6300 K (or 9000 K) Is there a way to configure Xorg in order to see the same thing on both screen ? Thanks Alain You need to do that with your monitors. Yo

color temperature of screens // dual screen

Hi I have a laptop with warm colors (i guess near 5000 K) and an additional screen with 6300 K (or 9000 K) Is there a way to configure Xorg in order to see the same thing on both screen ? Thanks Alain -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsub

Re: F1 through F6 console screens disappeared

On Thu, Jul 01, 2010 at 10:37:43AM -0500, John W Foster wrote: > from the xserver screen. Good so far. Then I tried to switch to the F1 > screen which I use frequently along with all those console based screens > & it would not switch to the console. Make sure your keyboard is sti

Re: F1 through F6 console screens disappeared

conf file then > run aticonfig for that setup. I now have full control of the ATI card > from the xserver screen. Good so far. Then I tried to switch to the F1 > screen which I use frequently along with all those console based screens > & it would not switch to the console. I tried instal

F1 through F6 console screens disappeared

from the xserver screen. Good so far. Then I tried to switch to the F1 screen which I use frequently along with all those console based screens & it would not switch to the console. I tried installing the "console" tools & removed kbd but that did not help. Any tips for fixing this.

Re: X11 error at login: "no screens found"

sing config file: "/etc/X11/xorg.conf" > > (EE) Failed to load module "nv" (module does not exist, 0) > (EE) No drivers available. X can't find the driver. Please post the output of dpkg -l xserver-xorg-video-nv > Fatal server error: > no screens found >

Re: X11 error at login: "no screens found"

On Mon, Jun 28, 2010 at 05:07, Charles Blair wrote: >   I recently upgraded from etch to lenny, and most features > of the system seemed to be working. > >   After a day or two with the new system, I am getting a > character-based screen to log in, instead of the X display. > >   Below, I give the

Re: X11 error at login: "no screens found"

On 2010-06-28 14:07 +0200, Charles Blair wrote: >I recently upgraded from etch to lenny, and most features > of the system seemed to be working. > >After a day or two with the new system, I am getting a > character-based screen to log in, instead of the X display. Did X work previously?

X11 error at login: "no screens found"

mplemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 06:30:21 2010 (==) Using config file: "/etc/X11/xorg.conf" (EE) Failed to load module "nv" (module does not exist, 0) (EE) No drivers available. Fatal server error: no screens found

Debian and touch-screens

well. I've found some support for touch screens (some models), but not clear for integrated/compact systems. Someone knows where to look for?, or has some experience?, some URL? Thanks in advance, -- Jose Manuel Pérez (+34 943 018705) Redes y Sistemas / Sarea eta Sistemak Red Académica i2b

nvidia and xrandr and multiple screens

Hi I am trying to setup xrandr + nvidia on xorg. I am currently using twinview, which works well on boot up, but if I undock my laptop I can't readjust my screen's xrandr only shows 1 mode. if I undo twinview and try and setup multiple devices I can't get my second screen to show up, xrandr onl

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

On Fri, Jun 22, 2007 at 09:23:32AM -0400, Michael Matthews <[EMAIL PROTECTED]> was heard to say: > I am wondering if anyone can tell me if there's an easy way, when using > `apt-get upgrade`, to get around the pop-up configuration screens that occur > with some updates. On

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

Karl E. Jorgensen wrote: > # DEBIAN_FRONTEND=noninteractive apt-get install whatever In addition to this to be truly batch mode you may want to set DEBCONF_ADMIN_EMAIL="" too. # DEBCONF_ADMIN_EMAIL="" DEBIAN_FRONTEND=noninteractive apt-get install -q -y whatever That will prevent email from b

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

AM -0400, Michael Matthews wrote: > All, > > I am wondering if anyone can tell me if there's an easy way, when using > `apt-get upgrade`, to get around the pop-up configuration screens that occur > with some updates. One example of this is with a kernel update. It appears > th

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

On Fri, Jun 22, 2007 at 09:23:32AM -0400, Michael Matthews wrote: > All, > > I am wondering if anyone can tell me if there's an easy way, when using > `apt-get upgrade`, to get around the pop-up configuration screens that occur > with some updates. One example of this is

Re: Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

pgrade`, to get around the pop-up configuration screens that occur with some updates. One example of this is with a kernel update. It appears that the kernel update wants to inform you that you should reboot soon, and unfortunately the colorful blue and red screen cannot be circumvented with the

Scripting Apt-Get (pop-up screens, e.g. with kernel updates)

All, I am wondering if anyone can tell me if there's an easy way, when using `apt-get upgrade`, to get around the pop-up configuration screens that occur with some updates. One example of this is with a kernel update. It appears that the kernel update wants to inform you that you should r

Re: [OT] Re: Changing screens

ple PowerBook G4) that I use both at home and on > > > the road (with Debian Etch installed). At home, the laptop is connected > > > to an external screen, with the laptop closed (so, at home, I don't use > > > the laptops own screen). The two screens have differen

[OT] Re: Changing screens

stalled). At home, the laptop is connected > > to an external screen, with the laptop closed (so, at home, I don't use > > the laptops own screen). The two screens have different resolutions > > (laptop screen: 1440 x 1024, external screen at home: 1280 x 1024). > > &

Re: Changing screens

On Sun, 20 May 2007, Mumia W.. wrote: On 05/20/2007 01:38 PM, Matthias Brennwald wrote: [...] Another option would be to have both "1440x1024" and "1280x1024" in the modes list and to use Control-Alt-Plus to switch between the modes. You can also use the ServerLayout

Re: Changing screens

On 05/20/2007 03:34 PM, Matthias Brennwald wrote: [EMAIL PROTECTED] wrote: Another option would be to have both "1440x1024" and "1280x1024" in the modes list What would this look like? Two 'Modes' lines? Or one line with two entries? How are they separated (space, comma, whatever)? They

Re: Changing screens

On Sun, May 20, 2007 at 10:34:07PM +0200, Matthias Brennwald wrote: > [EMAIL PROTECTED] wrote: > > >Another option would be to have both "1440x1024" and "1280x1024" in the > >modes list > > What would this look like? Two 'Modes' lines? Or one line with two > entries? How are they separated (sp

Re: Changing screens

osed (so, at home, I don't use > the laptops own screen). The two screens have different resolutions > (laptop screen: 1440 x 1024, external screen at home: 1280 x 1024). > > The problem is that Debian uses the same screen resolution for both > screens, wich I find annoying (i

Re: Changing screens

[EMAIL PROTECTED] wrote: Another option would be to have both "1440x1024" and "1280x1024" in the modes list What would this look like? Two 'Modes' lines? Or one line with two entries? How are they separated (space, comma, whatever)? and to use Control-Alt-Plus to switch between the modes.

Re: Changing screens

aptops own screen). The two screens have different resolutions (laptop screen: 1440 x 1024, external screen at home: 1280 x 1024). The problem is that Debian uses the same screen resolution for both screens, wich I find annoying (it uses 1440 x 1024, which means that the image is larger than what

Changing screens

Dear all I've got a laptop (Apple PowerBook G4) that I use both at home and on the road (with Debian Etch installed). At home, the laptop is connected to an external screen, with the laptop closed (so, at home, I don't use the laptops own screen). The two screens have different r

  1   2   3   >