"Sean Norris,,," <[EMAIL PROTECTED]> writes:
> Thanks for the really quick replies.
>
> Bud Rogers wrote:
>
> >
> >
> > You probably need to add "static" to that line. And you will need to
> > add at least address and netmask entries for that interface. Man
> > interfaces for details.
> >
Hello all,
This is just to thank all those who offered advice.
I finally managed to bring up the eth1 interface. I tried all the
suggestions, aliases with a single tulip driver, aliases with 2 tulip
drivers, compiled the tulip driver into the kernel and passed ether
arguments with lilo.
Ob
What you need is load the module twice !
One for each NIC.
I have that setup on my LAN as I use 2 ne2000 clones :
(You will have to adapt this to your tulip module)
First edit the /etc/modutils/aliases file and add :
<-- cut here -->
# Aliases for using twice the ne2000 module (ne)
alias ne0
> ###network modules
> alias eth0 tulip
> alias eth1 tulip
What if you added the right IO, to the lines above ? Did you try that ?
Although I'm not sure, as far as I could tell that module didn't have
options.
> #options tulip io=0x400,0x800
This was for both cards right ?
>
> The options line
"Sean Norris,,," <[EMAIL PROTECTED]> writes:
> Hello All,
>
> I have been trying to set up a small local network with a linux box as a
> gateway and my wife's win98
> laptop.
>
> I am running potato with a fresh 2.2.17 kernel from kernel.org. Currently, a
> D-link DE-530TX is working
> well w
Still no luck,
Leen Besselink wrote:
a good idea could be is make a modules alias for each card (I think it
goes in /etc/modutils/aliases):
alias eth0 de4x5
alias eth1 3c59x
or whatever you need.
This could also help... (then just do:
modprobe -v eth0
modprobe -v eth1
)
Hope this helps,
Thanks for the really quick replies.
Bud Rogers wrote:
>
>
> You probably need to add "static" to that line. And you will need to
> add at least address and netmask entries for that interface. Man
> interfaces for details.
>
> iface eth1 inet static
> address 192.168.1.1
> netmask 255.255.255.
On Thu, 23 Nov 2000, Sean Norris,,, wrote:
> Hello All,
>
> I have been trying to set up a small local network with a linux box as a
> gateway and my wife's win98 laptop.
>
> I am running potato with a fresh 2.2.17 kernel from kernel.org.
> Currently, a D-link DE-530TX is working well with a
On Thursday 23 November 2000 12:23, Sean Norris,,, wrote:
> In my /etc/network/interfaces file there is no entry for eth1.
>eth0 is : iface eth0 inet dhcp
> so I tried adding : "iface eth1 inet"
>
> Now with #ifup eth1, I get the error
>/etc/network/interfaces: too few parameters for if
9 matches
Mail list logo
