David Wright composed on 2021-06-22 11:00 (UTC-0500):
> On Sat 19 Jun 2021 at 14:51:53 (-0400), Felix Miata wrote:
>> As already mentioned, you needn't have paid. Two unrelated things were
>> likely to
>> have caused this to happen. Vista and or Win10 could have been installed in
>> MBR
>> mode
On Sat 19 Jun 2021 at 14:51:53 (-0400), Felix Miata wrote:
> William Lee Valentine composed on 2021-06-19 10:19 (UTC-0600):
>
> > I had installed a back version of Debian in a partition on a
> > 500-megahertz computer that was otherwise running Windows 2000 and
> > MS-DOS.
>
> > When I had finish
On Sat, 19 Jun 2021 10:19:57 -0600
William Lee Valentine wrote:
>
> I later installed Debian 10.2 in a partition on a 64-bit computer that
> was otherwise running Windows 10.
>
> When I had finished installing Linux, Grub wanted to know whether I
> wanted it installed on the master boot record
William Lee Valentine composed on 2021-06-19 10:19 (UTC-0600):
> I had installed a back version of Debian in a partition on a
> 500-megahertz computer that was otherwise running Windows 2000 and
> MS-DOS.
> When I had finished installing Linux, on that machine, Grub wanted to
> know whether I wan
On 6/19/21 12:19 PM, William Lee Valentine wrote:
I had installed a back version of Debian in a partition on a
500-megahertz computer that was otherwise running Windows 2000 and
MS-DOS.
When I had finished installing Linux, on that machine, Grub wanted to
know whether I wanted it installed in
On 19/06/2021 13:19, William Lee Valentine wrote:
I have now another 64-bit computer, running Windows 10, whose BIOS
provides the option of booting from a USB device. If I install Debian
10.2 in a partition on this computer, would I tell Grub to make the
partition bootable? Would Grub instead ins
Hello.
You do not need to reinstall Windows to fix boot problems. Download Windows
iso from the Microsoft website along with a special tool to burn it to the
flash drive, boot from it and Windows will repair most booting issues.
Motherboard firmware may act in Legacy/BIOS mode or UEFI mode.
Mast
I had installed a back version of Debian in a partition on a
500-megahertz computer that was otherwise running Windows 2000 and
MS-DOS.
When I had finished installing Linux, on that machine, Grub wanted to
know whether I wanted it installed in the master boot record. It
reported seeing Windows 20
Many thanks to Christian, David, and Pascal!
With your hints I was able to solve the problems.
Lessons learned:
1. d-i needs to be in "low" questions mode (expert) to allow
manual selection of partition type (e.g. DOS/MBR or GPT).
2. d-i seems to call grub-install on /dev/md0, even if user
Christian Seiler a écrit :
> On 01/08/2016 02:51 AM, Pascal Hambourg wrote:
>> Current tools won't align for compatibility purpose any more. The
>> default 1-MiB alignment is only for performance purpose, not compatibility.
>
> This is new to me - I always thought that this was entirely for
> comp
On 01/07/2016 04:22 PM, W. Martin Borgert wrote:
I try to install Jessie with a soft RAID6 of four disks, 1 TB each.
The idea is to use the complete disk for RAID and then only on top
separate swap and root. ...
grub does not install on the fourth disk. It turns out, that the
fourth disk is GPT,
On 01/08/2016 02:51 AM, Pascal Hambourg wrote:
> Christian Seiler a écrit :
>> for compatibility reasons every tool that manipulates MBR
>> partitions will therefore want to leave a gap after the MBR.
>
> Current tools won't align for compatibility purpose any more. The
> default 1-MiB alignment i
Christian Seiler a écrit :
>
> Well sure, but MBR also has all the CHS baggage - and while it isn't
> used anymore on modern systems, there still is the de-factor standard
> of aligning the first partition with the first CHS-sector that is so
> ingrained historically that the gap between MBR and t
On 01/08/2016 02:03 AM, Pascal Hambourg wrote:
> Christian Seiler a écrit :
>> Problem is that GPT doesn't have such a gap.
>
> GPT usually also has such a gap for partition alignment purpose.
Well sure, but MBR also has all the CHS baggage - and while it isn't
used anymore on modern systems, the
Christian Seiler a écrit :
>
> Ok, if you use MBR, only the first 512 bytes are used for the MBR
> partition table, so that the gap between those bytes and the first
> partition (and there is *always* a gap, the size depends on the
> details of the logical geometry of the disk) has traditionally
>
On 01/08/2016 01:22 AM, W. Martin Borgert wrote:
> I try to install Jessie with a soft RAID6 of four disks, 1 TB each.
> The idea is to use the complete disk for RAID and then only on top
> separate swap and root.
>
> The installation worked fine on one machine, but for some reason,
> grub does no
W. Martin Borgert a écrit :
>
> I try to install Jessie with a soft RAID6 of four disks, 1 TB each.
> The idea is to use the complete disk for RAID and then only on top
> separate swap and root.
>
> The installation worked fine on one machine, but for some reason,
> grub does not install on the f
Hi,
I try to install Jessie with a soft RAID6 of four disks, 1 TB each.
The idea is to use the complete disk for RAID and then only on top
separate swap and root.
The installation worked fine on one machine, but for some reason,
grub does not install on the fourth disk. It turns out, that the
fou
On Thursday 04 December 2008, "raman narasimhan" <[EMAIL PROTECTED]> wrote
about 'problem with grub loader and screen resolution in gnome':
>A. How do i revert back to grub loader??
From within the running system install grub to the mbr. For more
information, se
during debian installation from a new r4 cd that i downloaded from
debian.org, i got the following error
grub fatal error
during installation and then i installed the lilo loader instead of debian.
now i can access debian though i still dont know how to configure lilo to
access windows. this is
[EMAIL PROTECTED] wrote:
2008-05-15 17:02+0200 Gilles Guiot:
my server has two raid1 arrays, each with two disks, for a total of
four hd. sda1 relates to the biggest partion on the first array (sda)
and sdb1 relates to the only partition on the second raid array. point
is this sdb1 is "in lv
2008-05-15 17:02+0200 Gilles Guiot:
my server has two raid1 arrays, each with two disks, for a total of
four hd. sda1 relates to the biggest partion on the first array
(sda) and sdb1 relates to the only partition on the second raid
array. point is this sdb1 is "in lvm" so to speak, ie ther
[EMAIL PROTECTED] a écrit :
Am 2008-05-15 um 11:14 schrieb Gilles Guiot:
Hello all,
I'm a newbie to Linux. I have a Dell server with two raid arrays (sda
and
sdb), both raid 1. I created and LVM on sdb. After having copied the
filesystem from sda onto sdb, I want to configure grub so that i
Am 2008-05-15 um 11:14 schrieb Gilles Guiot:
Hello all,
I'm a newbie to Linux. I have a Dell server with two raid arrays
(sda and
sdb), both raid 1. I created and LVM on sdb. After having copied the
filesystem from sda onto sdb, I want to configure grub so that it
boots on
sdb.
Could y
Hello all,
I'm a newbie to Linux. I have a Dell server with two raid arrays (sda
and sdb), both raid 1. I created and LVM on sdb. After having copied
the filesystem from sda onto sdb, I want to configure grub so that it
boots on sdb. when i type grub> root (sdb,0) , i get the message :
synt
On Thu, 13 Apr 2006 21:21:44 +0200
Philippe De Ryck <[EMAIL PROTECTED]> wrote:
> On Thu, 2006-04-13 at 12:13 -0600, Justin Guerin wrote:
> > Hi,
> >
> > I've had to move my install to a new physical disk. I made an image of my
> > two partitions (/boot and /), and they restored properly. Now,
On Thu, 2006-04-13 at 12:13 -0600, Justin Guerin wrote:
> Hi,
>
> I've had to move my install to a new physical disk. I made an image of my
> two partitions (/boot and /), and they restored properly. Now, I only need
> to run grub-install to install the boot loader.
>
> When I boot from Kno
On Thursday 13 April 2006 13:21, Philippe De Ryck wrote:
> On Thu, 2006-04-13 at 12:13 -0600, Justin Guerin wrote:
> > Hi,
> >
> > [snip problem]
>
> Justin,
>
> I don't think it is necessary to chroot at all. The knoppix disk has
> grub on board, so you can use that command. The command also has a
Hi,
I've had to move my install to a new physical disk. I made an image of my
two partitions (/boot and /), and they restored properly. Now, I only need
to run grub-install to install the boot loader.
When I boot from Knoppix, I can mount the / to /mnt/target, then mount /boot
to /mnt/targ
29 matches
Mail list logo
