> Normally you can ignore that warning.
Not sure about this. If I ignore the warning than the kernel modules that get
build do not load properly.
The give an:
insmod: Invalid module format -1
error message. Also they don't get loaded using modprobe. I have to use the
dumb insmod command.
> Any
On Sun, Jul 05, 2009 at 05:34:02PM -0700, Kushal Koolwal wrote:
>
> So I am trying to build a out-of-tree kernel module for my graphics chipset.
>
> I am using Debian 5.0 (x86) with 2.6.29-1-686 kernel.
>
> Now as soon as I give the "make" command from the source directory of my
> graphics chip
So I am trying to build a out-of-tree kernel module for my graphics chipset.
I am using Debian 5.0 (x86) with 2.6.29-1-686 kernel.
Now as soon as I give the "make" command from the source directory of my
graphics chipset, I get the following warning:
WARNING: Symbol version dump /usr/src/linux-
Thanks, Kostas.
[EMAIL PROTECTED] wrote:
> Hi Kostas,
> It's possible that the gcc version that the kernel was compiled with does
> not match the version you compiled the module with. This is just a guess
> but that does cause problems for loading modules.
> Cheers,
> Jonathan
>
>
> --
> To UNSUBS
Kostas Robotis wrote:
> Hello, I am new to linux ;) I have Debian Sarge with kernel 2.6.18.1
> and I want to load
> x_tables module in order to have the ip_tables. The "mod_probe
> x_tables" writes the following to the eventlog:
>
> Oct 28 20:55:41 localhost kernel: x_tables: version magic '2.6.1
Hello, I am new to linux ;) I have Debian Sarge with kernel 2.6.18.1
and I want to load
x_tables module in order to have the ip_tables. The "mod_probe
x_tables" writes the following to the eventlog:
Oct 28 20:55:41 localhost kernel: x_tables: version magic '2.6.18.1
preempt mod_unload PENTIUM4 REG
First of all, is there a good Debian kernel building howto?
When rebooting with a new kernel I get an error something like
kernel panic MODPROBE /lib/module/2.6.8/modules.dep no such file or directory.
This file exists the the above directory.
I installed the debian package kernel-source-2.6.8 an
I installed the sndconfig and started the program and went through
selected the CMI8330
I am having a modprobe error
/lib/modules/2.2.20/misc/ad1848.0: init_module: Device or resource busy
/lib/modules/2.2.20/misc/ad1848.0: insmod
/lib/modules/2.2.20/misc/ad1848.0: failed
/lib/modules/2.2.20
"Michael Blood" <[EMAIL PROTECTED]> writes:
> I am getting an error whenever I boot up into debian 2.2
[...]
> modprobe: modprobe: Can't locate module net-pf-1
I think net-pf-1 is the driver for Unix domain sockets (see
/etc/modules.conf). It seems your Linux doesn't have support for
them
Title: Blank
Hello all,
I am getting an error whenever I boot up
into debian 2.2
The specific error is :
modprobe: modprobe: Can't locate module net-pf-1
I did not load a network adapter driver when
I loaded the system and I think that might have something to do with the
probl
Hello to all. I'm getting a modprobe error.
"it is something like 'mod: runaway modprobe. Assume loop, stopped.'
That may be the exact error but it's very close. Anyone have any
ideas?
Thanks.
--
Rick Hayner
[EMAIL PROTECTED]
Member spebsqsa, Baritone Kalamazoo
On Sun, 2 Aug 1998, Robert Rati wrote:
> I added sound to my /etc/modules file so it would load at boot time, but I
> get this error:
> modprobe: no dependency information for module:
> "/lib/modules/2.0.34/misc/sound.o"
>
> I've done a make modules and modules_install as well as install when
Robert Rati wrote:
>
> I added sound to my /etc/modules file so it would load at boot time, but I
> get this error:
> modprobe: no dependency information for module:
> "/lib/modules/2.0.34/misc/sound.o"
>
> I've done a make modules and modules_install as well as install when I
> compiled my ker
I added sound to my /etc/modules file so it would load at boot time, but I
get this error:
modprobe: no dependency information for module:
"/lib/modules/2.0.34/misc/sound.o"
I've done a make modules and modules_install as well as install when I
compiled my kernel. I even tried it by itself. W
Hi,
>>"Steve" == Steve Hsieh <[EMAIL PROTECTED]> writes:
Steve> raindrop:/etc# depmod -a modprobe: error reading ELF header: No
Steve> such file or directory
Steve> I'm not sure if this is related to the fact that I built my own
Steve> custom kernel (using
Anyone know how to solve this one?
raindrop:/etc# depmod -a
modprobe: error reading ELF header: No such file or directory
I'm not sure if this is related to the fact that I built my own custom
kernel (using make-kpkg).
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "u
I fixed the binfmt_java problem. It seems that there was an alias (I
know not from where it is not in conf.modules) for binfmt-310
binfmt_java. When I try to run java progs it looks for binfmt--310
(note the two dashes), so I added an alias to binfmt--310 and voila it
worked.
--
TO UNSUBSCRIBE
On 8 Aug, Nathan E Norman wrote:
> Softdog is the software implemetation of the watchdog, I believe. If
> you're not using that then you probably don't need to alias ..
>
Well, I don't use it either, but have the alias with no problems.
You could try to alias char-major-10-130 off.
If you did
Softdog is the software implemetation of the watchdog, I believe. If
you're not using that then you probably don't need to alias ..
--
Nathan Norman
MidcoNet
410 South Phillips Avenue
Sioux Falls, SD 57104
Voice: (605) 334-4454 Fax: (605) 335-1173
email: [EMAIL PROTECTED] or [EMAIL PROTECTED]
P
It works now. I ran a depmod -a and reorganized my conf.modules. The
kerneld/module docs all say they are going to be removed -- so I had no
where to turn for info. The only two problems left are my
char-major-10-130 (which is an alias to softdog, whatever that is) and I
can not load binfmt_java
>On Thu, 7 Aug 1997, Shaleh wrote:
>> Do not quote me, but my fstab reads something like:
>>
>> ...
>> /dev/cdrom /cdrom iso9660 user,noauto
>
>If /dev/cdrom is a link to /dev/hdX you may find that umount won't work
>properly. Mount will follow the link and mount the right device, but put
>t
On Thu, 7 Aug 1997, Shaleh wrote:
> Do not quote me, but my fstab reads something like:
>
> ...
> /dev/cdrom /cdrom iso9660 user,noauto
If /dev/cdrom is a link to /dev/hdX you may find that umount won't work
properly. Mount will follow the link and mount the right device, but put
the real n
Hi, everyone --
I am having the same problem as the original poster; my kerneld (yes, I
_do_ have _only_ auto enabled in /etc/conf.modules) doesn't want to
mount the floppy in msdos automagically. However, when I do (as root)
insmod /lib/modules/2.0.30/fs/fat.o ;followed by
insmod /lib/modules/2.0
> Don't get me wrong, but maybe you don't use the mount command the right
> way ?
>
> To mount a CD-Rom you have to use something like mount -t iso9660
> /dev/hdb /cdrom
>
> To mount a fat Partition mount -t fat /dev/hda6 /mnt
You are right to ask -- no offense taken. My understanding is that b
On 7 Aug, Shaleh wrote:
> I do have auto in etc modules and nothing else. PPP/serial/slhc loads
> as a module when I use pon/poff without my intervention, but isofs and
> msdos/fat do not when I use mount.
>
Don't get me wrong, but maybe you don't use the mount command the right
way ?
To mount
Shaleh <[EMAIL PROTECTED]> writes:
> I do have auto in etc modules and nothing else. PPP/serial/slhc loads
> as a module when I use pon/poff without my intervention, but isofs and
> msdos/fat do not when I use mount.
% /sbin/lsmod
Module PagesUsed by
psaux 11
> I don't know what char-mode-10 is (maybe you could check the
I mistyped ( I was not at my box ) it says char-major-10
>
> Regarding the second question:
>
> do you have a line "auto" in your /etc/modules ?
>
I do have auto in etc modules and nothing else. PPP/serial/slhc loads
as a module whe
On 6 Aug, Shaleh wrote:
> During boot modprobe comes back and tells me that char-mode-10 could not
> be found. My other question: can kerneld load fs modules as needed. I
> loaded msdos and isofs as modules and I must load the appropriate one
> before I can mount floppies or cd's. I can do an i
During boot modprobe comes back and tells me that char-mode-10 could not
be found. My other question: can kerneld load fs modules as needed. I
loaded msdos and isofs as modules and I must load the appropriate one
before I can mount floppies or cd's. I can do an insmod -k but I
thought the idea w
29 matches
Mail list logo
