Alexandru Cardaniuc wrote:
> SMART overall-health self-assessment test result: FAILED!
> Drive failure expected in less than 24 hours. SAVE ALL DATA.
I think I pressed the wrong button and sent a premature reply, maybe not.
But that doesn't look good...
> Self-test execution status:( 41) The
James Vahn <[EMAIL PROTECTED]> writes:
> Alexandru Cardaniuc wrote:
> >Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER
> >cmd * Host Protected Area feature set * Look-ahead Write cache *
> >Power Management feature set Security Mode feature set SMART feature
> >set
>
James Vahn <[EMAIL PROTECTED]> writes:
> >Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER
> >cmd * Host Protected Area feature set * Look-ahead Write cache *
> >Power Management feature set Security Mode feature set SMART feature
> >set
> ^ Di
Alexandru Cardaniuc wrote:
>Enabled Supported:
> *NOP cmd
> *READ BUFFER cmd
> *WRITE BUFFER cmd
> *Host Protected Area feature set
> *Look-ahead
>Write cache
> *Power Management feature set
James Vahn <[EMAIL PROTECTED]> writes:
> >> Try turning the write-cache off: hdparm -W0 /dev/hda
> >
> > Tried that and didn't see any difference... It's really annoying...
>
> It was a stab in the dark. "hdparm /dev/hda", "hdparm -I /dev/hda".
# hdparm -I /dev/hda
/dev/hda:
ATA device, with
Alexandru Cardaniuc wrote:
> hda: task_in_intr: error=0x40 { UncorrectableError }, LBAsect=14410238,
> end_request: I/O error, dev hda, sector 14410238
> end_request: I/O error, dev hda, sector 14410238
> end_request: I/O error, dev hda, sector 14410238
Do you see a pattern? That looks like a sic
l probably see that it is resetting. The trick
> is to find out why, and it's going to be specific to your laptop.
> Chipset and harddrive -- the hardware. You can clear the dmesg buffer
> with "dmesg -c" to keep the clutter out.
$ dmesg
ide: failed opcode was: unknown
hda
Alexandru Cardaniuc wrote:
> JV> That's what you get when you buy things on sale... ;-)
>
> You mean the harddrive is dying?
No, probably not. You can install smartmontools to keep an eye on it
though. Cheap electronics just cause problems and it sounds like you
are suffering from one. :(
> I r
James Vahn <[EMAIL PROTECTED]> writes:
> Alexandru Cardaniuc wrote:
> > hda: irq timeout: status=0xd0 {Busy} ide: failed opcode
> >was: unknown ide0: reset: success
> > What does that mean and how can I solve this problem?
> That's what you get when you buy t
Alexandru Cardaniuc wrote:
> hda: irq timeout: status=0xd0 {Busy}
> ide: failed opcode was: unknown
> ide0: reset: success
>
> What does that mean and how can I solve this problem?
That's what you get when you buy things on sale... ;-)
Try turning the write-cache off:
Busy}
ide: failed opcode was: unknown
ide0: reset: success
What does that mean and how can I solve this problem?
$ df -h
FilesystemSize Used Avail Use% Mounted on
/dev/hda2 7.4G 3.1G 4.0G 44% /
/dev/hda3 65G 57G 4.5G 93% /home
tmpfs
11 matches
Mail list logo
