On Wed, Jan 09, 2002 at 07:34:05AM -0600, Lance Hoffmeyer wrote:
>
> I guess I will try to emulate scsi using ide-scsi?
If you want to try ide-scsi, with lilo add:
append="hdd=ide-scsi"
to /etc/lilo.conf and then run lilo.
After you reboot, the tape drive should be /dev/st0 and /dev/nst0.
Do
I guess I will try to emulate scsi using ide-scsi?
from dmesg:
ide-tape: Dumping ATAPI Identify Device tape parameters
ide-tape: Protocol Type: <6>ATAPI
ide-tape: Device Type: 1 - <6>Streaming Tape Device
ide-tape: Removable: Yes
ide-tape: Command Packet DRQ Type: <6>Accelerated DRQ
ide-tape: Co
I guess I will try to emulate scsi using ide-scsi?
from dmesg:
ide-tape: Dumping ATAPI Identify Device tape parameters
ide-tape: Protocol Type: <6>ATAPI
ide-tape: Device Type: 1 - <6>Streaming Tape Device
ide-tape: Removable: Yes
ide-tape: Command Packet DRQ Type: <6>Accelerated DRQ
ide-tape: Com
On Sat, Jan 05, 2002 at 01:10:26PM -0600, Lance Hoffmeyer wrote:
> I am using kernel 2.4.16 and have IDE TAPE built into the kernel. At
> boot I get a lot of info concerning the tape drive but when I attempt to
> write to the tape drive it locks the entire system up and I have to
> press the reset
I am using kernel 2.4.16 and have IDE TAPE built into the kernel. At
boot I get a lot of info concerning the tape drive but when I attempt to
write to the tape drive it locks the entire system up and I have to
press the reset key (something like tar -zcpvf /dev/ht0 / as an
example-not the actual co
I am using kernel 2.4.16 and have IDE TAPE built into the kernel. At
boot I get a lot of info concerning the tape drive but when I attempt to
write to the tape drive it locks the entire system up and I have to
press the reset key (something like tar -zcpvf /dev/ht0 / as an
example-not the actual co
6 matches
Mail list logo
