Thanks Rich and Jason.
I'm going to crawl over my config this weekend with a fine tooth comb until I
find
where my system is configured differently.
It seems that the XFree docs are incorrect btw, as they insist you must have
bus-mastering enabled on the Voodoo card.
John P Foster
Rich Rudnick
On Thu, 2001-10-04 at 07:31, Jason Healy wrote:
> At 1002229481s since epoch (10/04/01 02:04:41 -0400 UTC), john wrote:
>
> > It's interesting that you say you have DRI working but not bus mastering.
> > Can
> > you run setpci on the device and see if bit 3 of word 4 is set? If so my
> > problem
At 1002229481s since epoch (10/04/01 02:04:41 -0400 UTC), john wrote:
> It's interesting that you say you have DRI working but not bus mastering. Can
> you run setpci on the device and see if bit 3 of word 4 is set? If so my
> problem
> isn't bus mastering at all.
Here's my output from `glxinfo`
Jason,
I can't get the bus mastering to work, and so cant get DRI to work (I think
that's the reason anyway).
If you trace the thread you'll see I've tried everything I can think of.
If I find time I'll build a new (actually old) box this weekend and see if I can
get the Voodoo to work - I suspe
At 1002217484s since epoch (10/03/01 22:44:44 -0400 UTC), john wrote:
> Hi!
>
> I've tried both sets of advice, yet it still doesnt work.
What, exactly, doesn't work? No 3D, or no bus mastering?
I have a Voodoo3, and I don't think I ever got bus mastering to work either.
I thought that it was t
Hi!
I've tried both sets of advice, yet it still doesnt work.
I got brave (or frustrated) and tried to set other values using setpci. As far
as I can tell
nothing I can do actually changes any value, short of actually removing devices.
I'm beginning to suspect that I have a dodgy motherboard...
To all who helped,
Thank you! I'll not get to try this for some hours (I'm at work now), but I feel
hopeful...
And Rich, I never complain about too much detail. Thanks again :). I wasn't
aware of
the xlibmesa issue.
John Foster
Rich Rudnick wrote:
> On Tue, 2001-10-02 at 20:30, john wrote:
On Tue, 2001-10-02 at 20:30, john wrote:
> Thanks for replies so far
>
> Stephen Gran suggested that I look for a setting in the BIOS to search PCI
> 1st.
> Unfortunately the BIOS in this machine has a funky graphical UI (i.e. is
> designed for stupid people) and has no options suitable.
>
>
Thanks for replies so far
Stephen Gran suggested that I look for a setting in the BIOS to search PCI 1st.
Unfortunately the BIOS in this machine has a funky graphical UI (i.e. is
designed for stupid people) and has no options suitable.
Aaron Maxwell suggested I check the XFree site. This page
On Tuesday 02 October 2001 18:42, john wrote:
> Hi,
> I've been trying to get my Voodoo3 card to do DRI with X4.1.0.
> The catch is that the card (a Voodoo3 2000 PCI) needs to be set as
> bus master. When I try to use setpci
> I find that the bit for bus master is never set.
Did you try everything
Thus spake john:
> Hi,
>
> I've been trying to get my Voodoo3 card to do DRI with X4.1.0.
>
> The catch is that the card (a Voodoo3 2000 PCI) needs to be set as bus
> master. When I try to use setpci
> I find that the bit for bus master is never set.
>
> The motherboard is a LX/EX based board, w
Hi,
I've been trying to get my Voodoo3 card to do DRI with X4.1.0.
The catch is that the card (a Voodoo3 2000 PCI) needs to be set as bus
master. When I try to use setpci
I find that the bit for bus master is never set.
The motherboard is a LX/EX based board, with onboard sound, ATI 3D
graphics
12 matches
Mail list logo
