On 04/10/15 10:22, rlhar...@oplink.net wrote:
>> This also lets you adjust volume levels so that you don't overdrive the
>> > input on the transceiver. Nothing worse than a contact with a garbled
>> > station because the microphone input is being overdriven.
> All that is needed for monitoring is
On Sat
> Another option, get a small handheld transceiver that you can tune to
> the appropriate frequency.
>
> This also lets you adjust volume levels so that you don't overdrive the
> input on the transceiver. Nothing worse than a contact with a garbled
> station because the microphone input is
On 03/10/15 01:27, Danny wrote:
> In order to hear comms coming in or out of the transciever (via an antenna)
> one
> has to connect to the transciever with ANOTHER transciever in order to hear
> people talk (if you are tuned to the same frequency off course)
>
> Now ... my second transciever is
On 10/02/2015 10:18 PM, rlhar...@oplink.net wrote:
On Fri, October 2, 2015 5:34 pm, Doug wrote:
In this context, mis-use of terms "impedance" and "power" is adding
nothing but confusion.
I have no quarrel with the advice that follows, but I do not understand
the comment above.
Doug,
As I
On Fri, October 2, 2015 5:34 pm, Doug wrote:
>> In this context, mis-use of terms "impedance" and "power" is adding
>> nothing but confusion.
>
> I have no quarrel with the advice that follows, but I do not understand
> the comment above.
Doug,
As I recall, the thread began with the need to monit
On 10/02/2015 02:36 PM, rlhar...@oplink.net wrote:
On Fri, October 2, 2015 12:10 pm, Doug wrote:
You didn't mention that you want to add _speakers_. You might need a
small amplifier after the Y-adapter, since the speakers will be low
impedance--4- or 8 ohms. Visit ramseykits.com and find som
On Fri, October 2, 2015 12:10 pm, Doug wrote:
> You didn't mention that you want to add _speakers_. You might need a
> small amplifier after the Y-adapter, since the speakers will be low
> impedance--4- or 8 ohms. Visit ramseykits.com and find some small audio
> amplifiers in kit or assembled for
Quoting Danny (mynixm...@gmail.com):
> In order for me NOT to make a trip to the car every 10 minutes I though of
> splitting the LINE-OUT and add a normal set of desktop speakers.
>
> So ... I was just wondering if I will have any losses (in whatever form) when
> I
> "split" the signal ... keep
-Original Message-
From: Danny [mailto:mynixm...@gmail.com]
Sent: Friday, October 02, 2015 8:27 AM
To: debian-user@lists.debian.org
Subject: Re: Sound card question
> I believe that the output of the headphone jack is not impedance
> matched--I expect it's just a voltage so
On 10/02/2015 11:27 AM, Danny wrote:
I believe that the output of the headphone jack is not impedance matched--I
expect it's just
a voltage source. Wat's more, unless you are plugging the same low-impedance
devices into
both Y outputs, _and_ the source is impedance matched, you would not spli
> I believe that the output of the headphone jack is not impedance matched--I
> expect it's just
> a voltage source. Wat's more, unless you are plugging the same low-impedance
> devices into
> both Y outputs, _and_ the source is impedance matched, you would not split
> the power
> equally. I don
On Thu, October 1, 2015 3:57 pm, Doug wrote:
> What's more, unless you are
> plugging the same low-impedance devices into both Y outputs, _and_ the
> source is impedance matched, you would not split the power equally.
(This is an addendum to my previous reply)
There is no "splitting" of power. W
On Thu, October 1, 2015 3:57 pm, Doug wrote:
> I believe that the output of the headphone jack is not impedance
> matched--I expect it's just a voltage source. Wat's more, unless you are
> plugging the same low-impedance devices into both Y outputs, _and_ the
> source is impedance matched, you woul
On 10/01/2015 09:52 AM, Danny wrote:
On Sep 30 15, Doug :
To: debian-user@lists.debian.org
Date: Wed, 30 Sep 2015 13:39:16 -0400
From: Doug
Subject: Re: Sound card question
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101
Thunderbird/38.2.0
X-Loop: debian-user
Hi there
Danny wrote:
No jumpers on the motherboard ... :( ...
Sometimes it's the way the connector is plugged into the motherboard or
the front panel.
Sometimes it's a BIOS setting.
Look for AC 97.
See;
https://en.wikipedia.org/wiki/Intel_High_Definition_Audio
If all of this fails you ne
On Thu, October 1, 2015 8:52 am, Danny wrote:
> Using a Y-adapter naturally forces the following question:
> Does it effectively split the power/gain into two and I end up with half
> on one side and half on the other?
A Y-adapter simply parallels two circuits. There is no splitting as such.
The
No jumpers on the motherboard ... :( ...
On Oct 01 15, Rob van der Putten :
> To: debian-user@lists.debian.org
> Date: Thu, 01 Oct 2015 12:06:25 +0200
> From: Rob van der Putten
> Subject: Re: Sound card question
> User-Agent: Mozilla/5.0 (X11; Linux i686; rv:10.0.12) Gecko/2013
I checked alsamixer and have no means to enable/disable channels ... :( ...
On Sep 30 15, Seeker :
> To: debian-user@lists.debian.org
> Date: Wed, 30 Sep 2015 23:10:39 -0700
> From: Seeker
> Subject: Re: Sound card question
> User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64;
On Sep 30 15, Doug :
> To: debian-user@lists.debian.org
> Date: Wed, 30 Sep 2015 13:39:16 -0400
> From: Doug
> Subject: Re: Sound card question
> User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101
> Thunderbird/38.2.0
> X-Loop: debian-user@lists.debian.or
015 09:36:15 -0500
> From: rlhar...@oplink.net
> Subject: Re: Sound card question
> User-Agent: SquirrelMail/1.5.2 [SVN]
> X-Loop: debian-user@lists.debian.org
>
> On Wed, September 30, 2015 8:55 am, Danny wrote:
> > What I would like to know is if it would be possible t
Hi there
Seeker wrote:
If you do actually have an audio out and a line out and the line out
doesn't produce
audio when something is plugged into the audio out, it may be an
indication that it's
a hardwired mechanical function built into the audio out jack to break
the circuit to the
line out
On 9/30/2015 10:39 AM, Doug wrote:
On 09/30/2015 09:55 AM, Danny wrote:
Hi guys,
I have a Sigmatel STAC9227 on-board sound card. Everything works fine
as it
should. It has the normal Mic , Ext.Speaker and Line-Out jacks.
Currently the Mic and Ext.Speaker plugs are permanently occupied vi
On 09/30/2015 09:55 AM, Danny wrote:
Hi guys,
I have a Sigmatel STAC9227 on-board sound card. Everything works fine as it
should. It has the normal Mic , Ext.Speaker and Line-Out jacks.
Currently the Mic and Ext.Speaker plugs are permanently occupied via speaker/mic
headphones (Amateur Radio
On Wed, September 30, 2015 8:55 am, Danny wrote:
> What I would like to know is if it would be possible to send audio that
> goes to the headphones to the Line-Out jack at the same time?
I would be surprised that the case is otherwise. I always install
"pavucontrol" (pulse audio volume control),
Hi guys,
I have a Sigmatel STAC9227 on-board sound card. Everything works fine as it
should. It has the normal Mic , Ext.Speaker and Line-Out jacks.
Currently the Mic and Ext.Speaker plugs are permanently occupied via speaker/mic
headphones (Amateur Radio Stuff) ...
What I would like to know is
On Wed, 5 Sep 2012, Darac Marjal wrote:
> On Tue, Sep 04, 2012 at 05:57:07PM -0400, Jude DaShiell wrote:
> > I just tried: modprobe snd_pcm_oss then tried echo $? and got back a 0 no
> > other output from: modprobe snd_pcm_oss so in order to get that working I
> > will probably have to install a
On Tue, Sep 04, 2012 at 05:57:07PM -0400, Jude DaShiell wrote:
> I just tried: modprobe snd_pcm_oss then tried echo $? and got back a 0 no
> other output from: modprobe snd_pcm_oss so in order to get that working I
> will probably have to install alsa-oss. The oss drivers may be completely
> in
Okay, that modprobe command woke up the mixer and rexima found it with:
rexima -d /dev/mixer and took control as it had done on other computers
I had. I play frotz games and those have oss type sound effects in them
I've not heard since the first days I played infocom games on dos on a
pc all t
I just tried: modprobe snd_pcm_oss then tried echo $? and got back a 0 no
other output from: modprobe snd_pcm_oss so in order to get that working I
will probably have to install alsa-oss. The oss drivers may be completely
inappropriate for this card too.On Tue, 4 Sep 2012, lee wrote:
> Jude Da
Jude,
If "ls -al /dev/mixer" is not there, check that
the package "oss-compat" is installed?
If not sure post output of "apt-cache policy oss-compat"
Hopefully this will fix it.
--
"If you're not careful, the newspapers will have you hating the people
who are being oppressed, and loving the p
Jude DaShiell writes:
> Yes I have sound. rexima and aumix appear unable to locate any cards
> even with several different combinations of items parsed from the
> relevant lspci line.
According to [1] (which probably applies), you might want to try
something like "rexima -d /dev/mixer". Parsi
On Mon, Sep 03, 2012 at 06:23:20PM -0400, Jude DaShiell wrote:
> Yes, alsamixer finds a sound card as does amix -l and yes it's the only
> sound card installed. On Mon, 3 Sep 2012, lee wrote:
If you're using ALSA, then you should probably be aware that /dev/mixer
is not an ALSA device name. ALSA
Yes I have sound. rexima and aumix appear unable to locate any cards
even with several different combinations of items parsed from the
relevant lspci line.
On Tue, 4 Sep 2012, lee wrote:
> Jude DaShiell writes:
>
> > Yes, alsamixer finds a sound card as does amix -l and yes it's the only
>
Jude DaShiell writes:
> Yes, alsamixer finds a sound card as does amix -l and yes it's the only
> sound card installed. On Mon, 3 Sep 2012, lee wrote:
Ok then the card is recognised and probably working. Do you have sound?
In that case, I would think it's an issue with the programs you are
try
Yes, alsamixer finds a sound card as does amix -l and yes it's the only
sound card installed. On Mon, 3 Sep 2012, lee wrote:
> Jude DaShiell writes:
>
> > I ran both aumix -q and rexima and neither were able to find the sound
> > card.
>
> Is alsamixer able to find devices, or do some show up
Jude DaShiell writes:
> I ran both aumix -q and rexima and neither were able to find the sound
> card.
Is alsamixer able to find devices, or do some show up when you run
"aplay -l" or "aplay -L"? Is this the only sound card installed?
--
Debian testing amd64
--
To UNSUBSCRIBE, email to de
On Sun, 02 Sep 2012 20:45:42 -0400, Jude DaShiell wrote:
> Is it possible to create a /dev/mixer entry for this kind of sound card
> that will enable rexima and/or aumix to find the sound card and control
> the sound card?
JFYI, according to Debian's rexima package "NEWS.gz" file, that shouldn't
I ran both aumix -q and rexima and neither were able to find the sound
card. The sound card shows up using lspci, but I don't know what to parse
out of it for an ln -s command or if a /dev/mixer device if created would
even work in this circumstance. On Tue, 4 Sep 2012, Chris Bannister wrote:
On Sun, Sep 02, 2012 at 08:45:42PM -0400, Jude DaShiell wrote:
> Is it possible to create a /dev/mixer entry for this kind of sound card
> that will enable rexima and/or aumix to find the sound card and control
> the sound card?
Is the card being recognised?
What are you trying to do?
What have
Is it possible to create a /dev/mixer entry for this kind of sound card
that will enable rexima and/or aumix to find the sound card and control
the sound card?
---
jude Adobe fiend for failing to Flash
--
To UNSUBSCRI
On Sun, 2002-06-23 at 21:13, Geoff Ludwiczak wrote:
> Anyways, that's beside the point. What other sound cards can do this
> or is there some other alternative?
>
Check the Alsa project pages at www.alsa-project.org, and also their
mailling list archives.
The one that have been reported to work
Anyways.. I heard from some other people that certain sound cards are able to
play more than one audio stream at the same time in Linux without the sound
daemons. It seems a lot easier without one. I tried putting in a sound
blaster live (emu10k1) before and playing more than one sound worked.
Ho
On Sun, 2002-06-23 at 21:18, John Smith wrote:
> Right now, I'm using a creative vibra sb16, and it's working fine. However,
> I can't have more than one sound playing without getting a device or resource
> busy error. So I'm wondering, what can I do to be able to play more than one
> sound at th
Right now, I'm using a creative vibra sb16, and it's working fine. However,
I can't have more than one sound playing without getting a device or resource
busy error. So I'm wondering, what can I do to be able to play more than one
sound at the same time (without esd or other sound daemons). I kn
To add to what stephen said:
[EMAIL PROTECTED] wrote:
>
> On 29 Aug, Christopher M. Wesneski wrote:
> > I recently learned how to setup my Plug-and-Pray modem using pnpdump and
> > isapnp.
> >
> > pnpdump > /etc/isapnp.conf (then select the correct settings)
> > isapnp /etc/isapnp.conf
> > setse
On 29 Aug, Christopher M. Wesneski wrote:
> I recently learned how to setup my Plug-and-Pray modem using pnpdump and
> isapnp.
>
> pnpdump > /etc/isapnp.conf (then select the correct settings)
> isapnp /etc/isapnp.conf
> setserial /dev/ttyS1 port 0x2f8 irq 3 uart 16550
>
> Everything works great.
I'll try sending this again since I didn't get a response. I've been
having trouble with mail also but that is unrelated. If there was
responses I'm terribly sorry for wasting your time but if it's not too
much trouble can you forward them to my work address (
[EMAIL PROTECTED] )? I'm positive that
I recently learned how to setup my Plug-and-Pray modem using pnpdump and
isapnp.
pnpdump > /etc/isapnp.conf (then select the correct settings)
isapnp /etc/isapnp.conf
setserial /dev/ttyS1 port 0x2f8 irq 3 uart 16550
Everything works great. My question is, pnpdump also listed my sound
card. When I
48 matches
Mail list logo
