On Tue, 10 Jun 1997, Colin R. Telmer wrote:
> > D-Link 220's are PnP NE-2000 clones. If you get isapnptools you should be
> > able to configure the card in linux and then use the ne driver.
>
> I have tried to do this without success. I tried pnpdump without any
> options, but it only listed my A
On Tue, 10 Jun 1997, Colin R. Telmer wrote:
> On Thu, 5 Jun 1997, Jason Gunthorpe wrote:
>
> > > 2) What ethernet driver should I use for a D-LINK 220? NE-2000?
> >
> > D-Link 220's are PnP NE-2000 clones. If you get isapnptools you should be
> > able to configure the card in linux and then us
On Thu, 5 Jun 1997, Jason Gunthorpe wrote:
> > 2) What ethernet driver should I use for a D-LINK 220? NE-2000?
>
> D-Link 220's are PnP NE-2000 clones. If you get isapnptools you should be
> able to configure the card in linux and then use the ne driver.
I have tried to do this without success.
I was the author of the original DHCP client mini-HOWTO. I wrote it
last fall, but withdrew it this winter, because it had become
obsolete.
The HOWTO described a technique for using Win95 DHCP information to
give Linux its necessary IP identity and server information. It was a
stopgap, and did not
On Thu, 5 Jun 1997, Colin R. Telmer wrote:
> 2) According to the HOWTO, you need to get winipcfg (or what ever it is
> called the probes the cable modem server for an ip address) to write out
> it's information to file using some switch (specifics listed in HOWTO).
> The HOWTO then goes on to ins
Ron Welch wrote:
>
> FWIW, there a new version of the DHCP mini-HOWTO at:
>
> http://sunsite.unc.edu/LDP/HOWTO/mini/DHCPd
This HOWTO is for the DHCP ***server***
> I appears to have been updated on 5 March 1997. It
> no longer mentions winipcfg.
>
> P.S. Does anyone know about how this "w
On Thu, 5 Jun 1997, Ron Welch wrote:
> FWIW, there a new version of the DHCP mini-HOWTO at:
>
> http://sunsite.unc.edu/LDP/HOWTO/mini/DHCPd
unfortunately that is the server (dhcpd), not the client (dhcpcd). After I
take a stab at this, perhaps I'll try to write up a client mini-HOWTO. As
for the
FWIW, there a new version of the DHCP mini-HOWTO at:
http://sunsite.unc.edu/LDP/HOWTO/mini/DHCPd
I appears to have been updated on 5 March 1997. It
no longer mentions winipcfg.
P.S. Does anyone know about how this "wave" does authentication.
Does it use Kerberos?
--
--=-=-=-=-=-=-=-
Colin R. Telmer wrote:
>
> On Thu, 5 Jun 1997, Richard Morin wrote:
>
> > I've ignored the cable access threads in the past because it didn't
> > pertain to me. Now, I've been fortunate enough to have been selected for
> > a free three month trial of rogers "wave" in my area (Internet access
> >
One other thing I forgot to mention. I think you can also use alternative
sofware such as bootp, but I am quite sure that Rogers Wave uses the dhcp
protocol. Cheers.
--
Colin R. Telmer, Institute of Intergovernmental Relations
School of Policy Studies, Queen's University
On Thu, 5 Jun 1997, Richard Morin wrote:
> I've ignored the cable access threads in the past because it didn't
> pertain to me. Now, I've been fortunate enough to have been selected for
> a free three month trial of rogers "wave" in my area (Internet access
> through our cable giant Rogers). I w
You will probably have to figure how to authenticate yourself on
the cable company's network, and how to get an IP address assigned
to you if it is done dynamically. I have the RoadRunner cable modem
service from Time-Warner, and they us DHCP to assign IPs and Kerberos
to do authentication.
--
--
What kind of cable modems are they leasing to you? Zenith? LAN City?
Or are they doing it some other way? If so, I can't provide much help
:/
With either the Zenith or the LAN City product, the cable modem is
actaully an ethernet switch/cable modem, and an ehternet card is
installed into your P
13 matches
Mail list logo
