Hi,
Kreaped Ripping Reaper <[EMAIL PROTECTED]> writes:
> May 3 22:31:54 kreaper pppd[770]: Unsupported protocol 'Appletalk
> Control Protocol' (0x8029) received
My guess would be that during LCP negotiation, the remote end is offering
Appletalk piped of PPP. Why you'd want Appletalk piped over
Steve Martin writes:
> I keep getting a message in syslog saying ppp: error in VJ decompression.
Try adding the pppd option 'novj' to turn off VJ compression.
--
John Hasler
[EMAIL PROTECTED]
Dancing Horse Hill
Elmwood, Wisconsin
Daniel Martin wrote:
>
> On Mon, 17 Nov 1997, Dima wrote:
>
> > In message <[EMAIL PROTECTED]> you wrote:
> > >I received this last night:
> > >
> > >Excessive lack of response to LCP echo frames
> > >connection terminated
> >
> > In /etc/ppp/options there's a number of lcp-echo* options.
> > Com
First, last night was the first time I have seen that error. Been using
it for months. No change on the ISP end. Second, /dev/modem is
symlinked to /dev/ttyS1. So in my case /dev/modem is right. I also
tried /dev/ttyS1 just in case.
Dima wrote:
>
> In message <[EMAIL PROTECTED]> you wrote:
>
Shaleh writes:
> I had to reboot because my box quit seeing my modem. setserial would say
> /dev/modem, unknown UART, 0x2f8 irq 3 with `setserial /dev/modem`. It is
> an internal Best Data uses dip switches and has served me faithfully for
> many moons. Is there some way to reset a modem without
On Mon, 17 Nov 1997, Shaleh wrote:
> I received this last night:
>
> Excessive lack of response to LCP echo frames
> connection terminated
>
> What does this mean? I had to reboot because my box quit seeing my
> modem. setserial would say /dev/modem, unknown UART, 0x2f8 irq 3 with
> `setserial
On Mon, 17 Nov 1997, Dima wrote:
> In message <[EMAIL PROTECTED]> you wrote:
> >I received this last night:
> >
> >Excessive lack of response to LCP echo frames
> >connection terminated
>
> In /etc/ppp/options there's a number of lcp-echo* options.
> Comment them out.
>
> >What does this mean?
In message <[EMAIL PROTECTED]> you wrote:
>I received this last night:
>
>Excessive lack of response to LCP echo frames
>connection terminated
In /etc/ppp/options there's a number of lcp-echo* options.
Comment them out.
>What does this mean?
ppp sends out echo-requests to see if the link is up
Kevin Traas wrote:
>
> I'm getting a lot of the following error messages on the console of one of
> my boxes. It's a 386DX/40 with a PPP link to an ISP.
>
> ppp: frame with bad fcs, excess = 2a48
>
> It seems that for each one of these, ifconfig reports an error on the ppp0
> interface.
>
> A
9 matches
Mail list logo
