On Tue, Jul 12, 2022 at 10:28 AM Peter Ehlert wrote:
>
> On 7/11/22 21:35, Tixy wrote:
> > On Mon, 2022-07-11 at 19:51 -0700, Peter Ehlert wrote:
> > [...]
> >> I decided to try a fresh netinstall alongside and Boom:
> >>
> >> ===
> >> multiple network interfaces
> >>
> >> eno1: Intel Corporation
On Tue 12 Jul 2022 at 15:44:41 (+0100), Tixy wrote:
> Another idea, is looking for that network name in the logs for the
> current boot.
>
> journalctl -b | grep -B3 enx00e04c534458
>
> That'll give you matches with the three lines before so you can see the
> context.
I'd use grep -B3 -A3 -i
On Tue, 2022-07-12 at 05:35 +0100, Tixy wrote:
> On Mon, 2022-07-11 at 19:51 -0700, Peter Ehlert wrote:
> [...]
> >
> > I decided to try a fresh netinstall alongside and Boom:
> >
> > ===
> > multiple network interfaces
> >
> > eno1: Intel Corporation Ethernet Connection (2) I218-LM
> > enp5s0:
On 7/11/22 21:35, Tixy wrote:
On Mon, 2022-07-11 at 19:51 -0700, Peter Ehlert wrote:
[...]
I decided to try a fresh netinstall alongside and Boom:
===
multiple network interfaces
eno1: Intel Corporation Ethernet Connection (2) I218-LM
enp5s0: Intel Corporation 1210 Gigabit Network Connection
On Mon, 2022-07-11 at 19:51 -0700, Peter Ehlert wrote:
[...]
>
> I decided to try a fresh netinstall alongside and Boom:
>
> ===
> multiple network interfaces
>
> eno1: Intel Corporation Ethernet Connection (2) I218-LM
> enp5s0: Intel Corporation 1210 Gigabit Network Connection
> enx00e04c534458
On Tue, Mar 25, 2003 at 08:58:41AM -0600, Juan dominguez wrote:
| Hello everybody
|
| I have installed debian 3.0 in my PC. After that I
| recompiled the kernel (version 2.4.4). The network
| interface module is part of the kernel. I have a
| network interface working successfull, but I want to
"Mark L. Kahnt" <[EMAIL PROTECTED]> writes:
> 2) Linux, iirc, requires a kernel driver for each individual ethernet
> card, meaning that if you have two or more identical ethernet cards, you
> need the driver twice. The only way to do that is to compile it as a
> module, rather than into the kerne
On Wed, 2003-03-26 at 05:18, Raúl Alexis Betancort Santana wrote:
> El Tue, Mar 25, 2003 at 06:43:07PM -0500, Mark L. Kahnt escribió:
> > 2) Linux, iirc, requires a kernel driver for each individual ethernet
> > card, meaning that if you have two or more identical ethernet cards, you
> > need the d
On Tue, 2003-03-25 at 14:37, Juan dominguez wrote:
> I physically add another NIC, but when I try modconf it doesn't show
> the module of the NIC becouse it was compiled as a part of the kernel
> so i can't load this module but the other NIC is working (both NIC's
> are the same model )
>
> than
On Tue, 2003-03-25 at 09:58, Juan dominguez wrote:
> Hello everybody
>
> I have installed debian 3.0 in my PC. After that I
> recompiled the kernel (version 2.4.4). The network
> interface module is part of the kernel. I have a
> network interface working successfull, but I want to
> install ano
I physically add another NIC, but when I try modconf it doesn't show the module of the NIC becouse it was compiled as a part of the kernel so i can't load this module but the other NIC is working (both NIC's are the same model )
thanks for yopur cooperation!
"deFreese, Barry" <[EMAIL PROTECTED]>
> -Original Message-
> From: Juan dominguez [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 25, 2003 7:16 AM
> To: [EMAIL PROTECTED]
> Subject: Multiple network interfaces
>
>
> Hello everybody
>
> I have installed debian 3.0 in my PC. After that I
> recompiled the kernel (version 2.4.4
Hi
Are you wanting to add another IP to your existing network card? or are
you trying to install another network card to use another IP?
if your wanting to add another IP to an existing network card the eth1
should be eth0:1 otherwise you'll need to load the module for the new
card using modcon
Hello,
Try ifconfig -a
Do you see both nics?
If not, do modconf and install the second nic
Willem-Jan Meijer
Netherlands
-Oorspronkelijk bericht-
Van: Juan dominguez [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 25 maart 2003 15:59
Aan: [EMAIL PROTECTED]
Onderwerp: Multiple network inte
On Tue, 2002-04-23 at 07:26, Ilia Lobsanov wrote:
> I have two network interfaces:
>
> * eth0 = 100mbps ethernet using 3c59x (subnet 192.168.1.0, gw
> 192.168.1.1); configured using /etc/init.d/networking
> * eth1 = wireless using orinoco_cs on D-Link DWL650 (subnet 192.168.0.0,
> gw 192.168.0.1
On Wed, 25 Apr 2001 17:14:59 Wayne Topa wrote:
> > In reply to:Lukas Ruf
> >
> >
> > Just added a 2nd card a few days ago. Here is what I recall doing.
> > Read through the Net3 and Ethernet howto's first and then
> >
> > /etc/network/aliases Had this for the first card
> ^^
Subject: Re: Multiple Network Interfaces per host -- possible?
Date: Fri, Apr 20, 2001 at 06:41:55PM -0400
In reply to:Wayne Topa
Quoting Wayne Topa([EMAIL PROTECTED]):
>
> Subject: Multiple Network Interfaces per host -- possible?
> Date: Fri, Apr 20, 2001
Subject: Multiple Network Interfaces per host -- possible?
Date: Fri, Apr 20, 2001 at 11:15:48AM +0200
In reply to:Lukas Ruf
Quoting Lukas Ruf([EMAIL PROTECTED]):
> Dear all,
>
> I installed a second network interface into my host. The problem that
> arises: only the old one ge
18 matches
Mail list logo
