On Wed, 21 Jul 1999, David Karlin wrote:
> > > > Out of curiousity, did you properly set up the modem with isapnptools,
> > > > and
> > > > then use setserial to set the irq, port, and everything?
> > >
> > > Nope. I disabled PNP and set everything with the jumpers as described
> > > in appendi
On Wed, Jul 21, 1999 at 10:07:45AM -0500, John Hasler wrote:
> David Karlin writes:
> > Is there an advantange to using isapnptools over disabling PNP?
>
> Quite the contrary. PNP is best avoided even in Windows.
The problem is that Windows insists on re-detecting everything every time
you re-bo
On Wed, Jul 21, 1999 at 02:11:52AM -0600, David Karlin wrote:
> Is there an advantange to using isapnptools over disabling PNP?
1. It's easier to change your settings later on. For example, lets say you
used IRQ 7 for your modem because your printer doesn't need it's IRQ anyway
but later you dec
> > > Out of curiousity, did you properly set up the modem with isapnptools, and
> > > then use setserial to set the irq, port, and everything?
> >
> > Nope. I disabled PNP and set everything with the jumpers as described
> > in appendix A of the manual. This seems to have worked fine. Is there
On Wed, 21 Jul 1999, David Karlin wrote:
> > > I disabled the pnp and set the irq and com port with the jumpers.
> >
> > Out of curiousity, did you properly set up the modem with isapnptools, and
> > then use setserial to set the irq, port, and everything?
>
> Nope. I disabled PNP and set every
David Karlin writes:
> Is there an advantange to using isapnptools over disabling PNP?
Quite the contrary. PNP is best avoided even in Windows.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
> > I disabled the pnp and set the irq and com port with the jumpers.
>
> Out of curiousity, did you properly set up the modem with isapnptools, and
> then use setserial to set the irq, port, and everything?
Nope. I disabled PNP and set everything with the jumpers as described
in appendix A of t
On Tue, 20 Jul 1999, David Karlin wrote:
> As I said in an earlier post, I installed one of these modems in a
> slink box last evening. I think I remember a similar plog entry before
> I disabled the pnp and set the irq and com port with the jumpers.
Out of curiousity, did you properly set up th
> To: Julian Gilbey
> Cc: debian-user@lists.debian.org
> Subject: Re: SupraExpress Modem problems
>
>
> Julian writes:
> > - the /var/log/ppp.log file showed that the intial connection had
> > been attempted, and that after precisely 45 seconds, an alarm
> >
This is the init string I use for my SupraExpress external modem
from /etc/diald/connect:
MODEM_INIT="AT&F2&C1&D2&K3M0"
Some Supra modems use &F2 instead of &F
--
Andrew
Julian writes:
> - the /var/log/ppp.log file showed that the intial connection had
> been attempted, and that after precisely 45 seconds, an alarm
> happened and the connection attempt failed. Nothing happened
> between the "expect OK" and the alarm lines in the log.
Sounds like the modem d
Julian,
I just installed a Diamond Supra Express in a slink box this
evening.
The first thing I did was disable PNP and set the com port
and irq via the jumpers (see Appendix A of the Supra Express
"Getting Started Manual").
I was lucky that I knew the com port and irq settings of the
old modem;
On 20-Jul-99 Julian Gilbey wrote:
> [Please Cc: me in replies.]
>
> I have just tried setting up a Debian system for someone, and have
> been unable to get his modem to work. The details are:
>
> - fresh slink (Debian 2.1) installation from the official CDs on a
>Pentium.
> - Windows repo
13 matches
Mail list logo
