On Mi, 08 iun 11, 10:06:36, Lisi wrote:
>
> I did say "YMMV" As I say, I personally find the traction inadequate with
> optical mice. I can easily deduce that most people like them!
Maybe it's just because of more dust here, but I have to clean the
"sliders" all the time on my mice. OTOH I do
Ralf Mardorf writes:
> Hi :)
>
> when using a PS/2 mouse with stable or testing the mouse wheel very
> seldom does work, usually it doesn't. For Ubuntu Maverick and Natty it's
> the same.
It might help to specify which protocol the mouse uses in your
xorg.conf. IIRC, there´s some program to chec
On Thu, 2011-06-09 at 20:54 +1000, Scott Ferguson wrote:
> On 09/06/11 19:44, Ralf Mardorf wrote:
> > On Wed, 2011-06-08 at 21:45 -0400, Stephen Powell wrote:
> >> On Mon, 06 Jun 2011 19:05:30 -0400 (EDT), Ralf Mardorf wrote:
> >>> ...
> >>> Does Debian drop valid hardware, that isn't brand new?
>
On 09/06/11 19:44, Ralf Mardorf wrote:
> On Wed, 2011-06-08 at 21:45 -0400, Stephen Powell wrote:
>> On Mon, 06 Jun 2011 19:05:30 -0400 (EDT), Ralf Mardorf wrote:
>>> ...
>>> Does Debian drop valid hardware, that isn't brand new?
>>
>> I use a PS/2 mouse with Debian, but it does not have a wheel;
>
On Wed, 2011-06-08 at 21:45 -0400, Stephen Powell wrote:
> On Mon, 06 Jun 2011 19:05:30 -0400 (EDT), Ralf Mardorf wrote:
> > ...
> > Does Debian drop valid hardware, that isn't brand new?
>
> I use a PS/2 mouse with Debian, but it does not have a wheel;
> so I can't address your specific situation
On Mon, 06 Jun 2011 19:05:30 -0400 (EDT), Ralf Mardorf wrote:
> ...
> Does Debian drop valid hardware, that isn't brand new?
I use a PS/2 mouse with Debian, but it does not have a wheel;
so I can't address your specific situation. But as to your
more general question about hardware support, I dou
On Wednesday 08 June 2011 00:37:05 Ron Johnson wrote:
> >> You *like* ball mice?
> >
> > Yes - I find the extra traction far better. I have difficulty
> > controlling a laser mouse because there is virtually no traction. I am
> > slightly handicapped, so YMMV.
>
> Four little rubber "feet" on the
On 07/06/11 02:44 PM, Ralf Mardorf wrote:
>
> I guess wireless won't cause troubles for AF signals, but anyway I will
> avoid wireless, because I won't do bodybuilding and I won't a battery
> dieing, while I'm doing an audio production. Cable usually never gets
> broken here. I only had to solder
On 08/06/11 03:37, Lisi wrote:
> On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
>> I'm using a PS/2 mouse with Debian and
>> works very well.
>
> +1 Moreover, it has a ball not a light. I dread the day it dies!!
>
> Lisi
>
>
+1
Ball mice never die! (they just lose their balls, seriously)
YES! I keep a supply of recycled PS2 mice on hand. I make my mouse ergonomic
with strategically placed adhesive-backed, dense caulk strips. Those fancy
ergonomic monstrosities drive me nuts! Ditto laser mice.
--- On Tue, 6/7/11, Ron Johnson wrote:
> From: Ron Johnson
> Subject: Re
On 06/07/2011 06:00 PM, Lisi wrote:
On Tuesday 07 June 2011 18:41:19 Ron Johnson wrote:
On 06/07/2011 12:37 PM, Lisi wrote:
On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
I'm using a PS/2 mouse with Debian and
works very well.
+1 Moreover, it has a ball not a light. I dread the day it
On Tuesday 07 June 2011 18:41:19 Ron Johnson wrote:
> On 06/07/2011 12:37 PM, Lisi wrote:
> > On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
> >> I'm using a PS/2 mouse with Debian and
> >> works very well.
> >
> > +1 Moreover, it has a ball not a light. I dread the day it dies!!
>
> You *lik
On Tue, 2011-06-07 at 14:16 -0400, KS wrote:
> On 07/06/11 01:52 PM, Camaleón wrote:
> > On Tue, 07 Jun 2011 12:41:19 -0500, Ron Johnson wrote:
> >
> >> On 06/07/2011 12:37 PM, Lisi wrote:
> >>> On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
> I'm using a PS/2 mouse with Debian and
>
On Tue, 2011-06-07 at 17:52 +, Camaleón wrote:
> On Tue, 07 Jun 2011 12:41:19 -0500, Ron Johnson wrote:
>
> > On 06/07/2011 12:37 PM, Lisi wrote:
> >> On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
> >>> I'm using a PS/2 mouse with Debian and
> >>> works very well.
> >>
> >> +1 Moreover,
On 07/06/11 01:52 PM, Camaleón wrote:
> On Tue, 07 Jun 2011 12:41:19 -0500, Ron Johnson wrote:
>
>> On 06/07/2011 12:37 PM, Lisi wrote:
>>> On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
I'm using a PS/2 mouse with Debian and
works very well.
>>>
>>> +1 Moreover, it has a ball not a
On Tue, 07 Jun 2011 12:41:19 -0500, Ron Johnson wrote:
> On 06/07/2011 12:37 PM, Lisi wrote:
>> On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
>>> I'm using a PS/2 mouse with Debian and
>>> works very well.
>>
>> +1 Moreover, it has a ball not a light. I dread the day it dies!!
>>
> You *lik
On 06/07/2011 12:37 PM, Lisi wrote:
On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
I'm using a PS/2 mouse with Debian and
works very well.
+1 Moreover, it has a ball not a light. I dread the day it dies!!
You *like* ball mice?
--
"Neither the wisest constitution nor the wisest laws w
On Tuesday 07 June 2011 14:23:19 Camaleón wrote:
> I'm using a PS/2 mouse with Debian and
> works very well.
+1 Moreover, it has a ball not a light. I dread the day it dies!!
Lisi
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Conta
On Tue, 2011-06-07 at 13:23 +, Camaleón wrote:
> On Tue, 07 Jun 2011 01:05:30 +0200, Ralf Mardorf wrote:
>
> (...)
>
> > I guess Debian and Ubuntu only have issues with PS/2 mice.
>
> I can't speak for Ubuntu, but I'm using a PS/2 mouse with Debian and
> works very well. I wonder what can
On Tue, 07 Jun 2011 01:05:30 +0200, Ralf Mardorf wrote:
(...)
> I guess Debian and Ubuntu only have issues with PS/2 mice.
I can't speak for Ubuntu, but I'm using a PS/2 mouse with Debian and
works very well. I wonder what can cause a simple PS/2 mouse to
malfunction.
Anything at Xorg's log
On 06/06/2011 09:48 PM, Ralf Mardorf wrote:
[snip]
How should I break mouse wheel support, when I break ALSA? I try to get
Not at the same time, but with *different* fiddling.
--
"Neither the wisest constitution nor the wisest laws will secure
the liberty and happiness of a people whose manne
On 06/06/2011 06:05 PM, Ralf Mardorf wrote:
Hi :)
when using a PS/2 mouse with stable or testing the mouse wheel very
seldom does work, usually it doesn't. For Ubuntu Maverick and Natty it's
the same.
Did you choose 3-button emulation?
--
"Neither the wisest constitution nor the wisest laws
On Mon, 2011-06-06 at 21:23 -0500, Ron Johnson wrote:
> On 06/06/2011 08:52 PM, Ralf Mardorf wrote:
> > On Mon, 2011-06-06 at 20:18 -0500, Ron Johnson wrote:
> >> On 06/06/2011 07:33 PM, Ralf Mardorf wrote:
> >>> On Mon, 2011-06-06 at 18:18 -0500, Ron Johnson wrote:
> On 06/06/2011 06:05 PM, R
On Mon, 2011-06-06 at 21:23 -0500, Ron Johnson wrote:
> On 06/06/2011 08:52 PM, Ralf Mardorf wrote:
> > On Mon, 2011-06-06 at 20:18 -0500, Ron Johnson wrote:
> >> On 06/06/2011 07:33 PM, Ralf Mardorf wrote:
> >>> On Mon, 2011-06-06 at 18:18 -0500, Ron Johnson wrote:
> On 06/06/2011 06:05 PM, R
On 06/06/2011 08:52 PM, Ralf Mardorf wrote:
On Mon, 2011-06-06 at 20:18 -0500, Ron Johnson wrote:
On 06/06/2011 07:33 PM, Ralf Mardorf wrote:
On Mon, 2011-06-06 at 18:18 -0500, Ron Johnson wrote:
On 06/06/2011 06:05 PM, Ralf Mardorf wrote:
Since you didn't tell us what kind of PS/2 mouse, how
On Mon, 2011-06-06 at 21:33 -0400, Doug wrote:
> On 06/06/2011 07:05 PM, Ralf Mardorf wrote:
> > Hi :)
> >
> > when using a PS/2 mouse with stable or testing the mouse wheel very
> > seldom does work, usually it doesn't. For Ubuntu Maverick and Natty it's
> > the same.
> >
> > I replaced the mouse
On Mon, 2011-06-06 at 20:18 -0500, Ron Johnson wrote:
> On 06/06/2011 07:33 PM, Ralf Mardorf wrote:
> > On Mon, 2011-06-06 at 18:18 -0500, Ron Johnson wrote:
> >> On 06/06/2011 06:05 PM, Ralf Mardorf wrote:
> >> Since you didn't tell us what kind of PS/2 mouse, how in Eris' name are
> >> we suppose
On 06/06/2011 07:05 PM, Ralf Mardorf wrote:
Hi :)
when using a PS/2 mouse with stable or testing the mouse wheel very
seldom does work, usually it doesn't. For Ubuntu Maverick and Natty it's
the same.
I replaced the mouse with an USB mouse and the mouse wheel seems to work
all the time, tested
On 06/06/2011 07:33 PM, Ralf Mardorf wrote:
On Mon, 2011-06-06 at 18:18 -0500, Ron Johnson wrote:
On 06/06/2011 06:05 PM, Ralf Mardorf wrote:
Since you didn't tell us what kind of PS/2 mouse, how in Eris' name are
we supposed to help you?
Trekker Wheel Mouse 2.0A
Is that a MS two-button mou
On Mon, 2011-06-06 at 18:18 -0500, Ron Johnson wrote:
> On 06/06/2011 06:05 PM, Ralf Mardorf wrote:
> Since you didn't tell us what kind of PS/2 mouse, how in Eris' name are
> we supposed to help you?
Trekker Wheel Mouse 2.0A
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
wi
On 06/06/2011 06:05 PM, Ralf Mardorf wrote:
Hi :)
when using a PS/2 mouse with stable or testing the mouse wheel very
seldom does work, usually it doesn't. For Ubuntu Maverick and Natty it's
the same.
[snip]
Since you didn't tell us what kind of PS/2 mouse, how in Eris' name are
we supposed t
Kent West wrote:
> If you do, you'll need to run "gpmconfig" and configure it to repeat the
> data as "ms", then reconfigure X to pull the data from "/dev/gpmdata".
The only repeat data type that works for me is 'raw'. (shrug)
Bob
pgp0.pgp
Description: PGP signature
Kaveh Gh wrote:
Hi! (Again)
In /etc/X11/XF86Config-4, the mouse device has been
defined according to the following lines:
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Op
On Monday 10 May 2004 02:55, Kaveh Gh wrote:
> Hi! (Again)
>
> In /etc/X11/XF86Config-4, the mouse device has been
> defined according to the following lines:
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option
Everything worked perfectly once I modprobe'd mousedev. Thanks for the
help.
Kevin Wortman
Peter Samuelson wrote:
[Kevin Wortman]
(EE) xf86OpenSerial: Cannot open device /dev/psaux
No such device.
I tried to cat /dev/psaux and /dev/input/mice and /dev/input/mouse0 ,
and all g
[Kevin Wortman]
> (EE) xf86OpenSerial: Cannot open device /dev/psaux
>No such device.
> I tried to cat /dev/psaux and /dev/input/mice and /dev/input/mouse0 ,
> and all give a device not found error, which led me to believe the
> kernel module was not loaded. But my dmesg contains
>
>
El(On) 28/06/2003 (15:25:27), Arlo escribió(wrote):
> I've been looking all over the net trying trying to solve this problem,
> I found a few posts where people had the same problem, but no solution.
>
> 'cat /proc/interrupts' reveals:
> 11: 10394 10590 IO-APIC-level eth0
> 14:
On Thu, May 16, 2002 at 05:42:30PM +0100, Vasco Figueira wrote:
> Hi all,
>
> When recently upgraded from potato to woody, wich means xfree 3.x to
> 4.x, I have occasionaly some problems with my external (ps/2) mouse.
>
> I have a Toshiba Satellite 4070, and the mouse is a Microsoft
> Intellimous
On 16 May 2002, Vasco Figueira wrote:
> Hi all,
>
> When recently upgraded from potato to woody, wich means xfree 3.x to
> 4.x, I have occasionaly some problems with my external (ps/2) mouse.
>
> I have a Toshiba Satellite 4070, and the mouse is a Microsoft
> Intellimouse 1.2A, PS/2 compatible. X
On Thu, May 09, 2002 at 03:40:03AM -0700, John Joe wrote:
> i have Debian 2.2 and PS/2 mouse. the mouse works
> except the mouse pointer (the X mark) does not show.
> (it takes me a while to realize that the mouse works)
I suggest you do the following:
- install gp;
- run gpmconfig and get your mo
On Wed, Apr 03, 2002 at 08:51:15PM +0200, lasse wrote:
> simular problem..
>
> My problem, is that when i move the mouse fast, it klicks, and it's not me
> klicking.
> this happends on both my testing and sid. The mouse dont act like this in
> FreeBSD.
>
> -snip-XF86-
> Section "Input
lasse wrote:
simular problem..
My problem, is that when i move the mouse fast, it klicks, and it's not me
klicking.
this happends on both my testing and sid. The mouse dont act like this in
FreeBSD.
-snip-XF86-
Section "InputDevice"
Identifier "Generic Keyboard"
Oops. Forgot to CC this to the list:
"Brian W. Carver" wrote:
> Thank you very much. The PS/2 mouse now works after I did this in bash:
>
> apt-get remove gpm
>
> The mouse started working in X immediately.
>
> It was then much easier to try to deal with my screen resolution problem.
>
> It seem
On Tue, Apr 02, 2002 at 09:43:35PM -0800, Brian W. Carver wrote:
> [snip]
> MY PROBLEM: I got the PS/2 mouse to work in the XFree86 setup by
> choosing dev/psaux instead of dev/mouse, and it worked perfectly during
> THAT setup routine. BUT, when I now boot into X (man was that an
> accomplishment
> MY PROBLEM: I got the PS/2 mouse to work in the XFree86 setup by
> choosing dev/psaux instead of dev/mouse, and it worked perfectly during
> THAT setup routine. BUT, when I now boot into X (man was that an
> accomplishment!) the mouse won't move at all at first and then when I
> try to move it,
The best way to get help with X is to post your /etc/X11/XF86Config. Also you
might have better luck using the graphical setuptool XF86Setup. You need to
have xserver-vga installed to use this.
Brian W. Carver wrote:
> Hi,
>
> I have never installed linux before, unless you count SuSE Live E
On 21/03/02 Patrick Lane did speaketh:
> blacktop:/home/mandingo# for i in a b; do hdparm -d 1 /dev/hd$i; done
>
> /dev/hda:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
> using_dma= 0 (off)
>
> /dev/hdb:
> setting using_dma to 1 (on)
> HDIO_SET_DMA fail
Patrick Lane wrote:
> blacktop:/home/mandingo# for i in a b; do hdparm -d 1 /dev/hd$i; done
>
> /dev/hda:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
> using_dma= 0 (off)
>
> /dev/hdb:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not per
On Thu, 2002-03-21 at 16:38, Patrick Lane wrote:
>
> blacktop:/home/mandingo# for i in a b; do hdparm -d 1 /dev/hd$i; done
>
> /dev/hda:
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
> using_dma= 0 (off)
>
> /dev/hdb:
> setting using_dma to 1 (on)
> HDIO_
blacktop:/home/mandingo# for i in a b; do hdparm -d 1 /dev/hd$i; done
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma= 0 (off)
/dev/hdb:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma= 0 (off)
blackt
On Thu, 2002-03-21 at 15:57, Patrick Lane wrote:
> Any time there is any hard drive activity, my mouse will freeze up until
> the hard drive stops being accessed. This has only happened since I've
> downgraded to woody (reformatted). I do not have a slow computer. I'm
> running a Athlon 1200, 1 GB
On Fri, Feb 22, 2002 at 07:12:55PM +, [EMAIL PROTECTED] wrote:
| I cannot get any ps/2 mouse to work thru a serial adapter.
| Is there something else I should be looking at?
Unless you paid a lot of money for your adapter, it is nothing more
than some wires between two differently shaped con
#include
[EMAIL PROTECTED] wrote on Fri Feb 22, 2002 um 07:12:55PM:
> I have the device set for /dev/ttyS0, which is correct (un-adapted
> serial mice work fine).
Look through the protocols. XFree has sometimes problems with low-cost
mouse models. Also make sure that you mouse really understands
Hi all,
On Sun, Oct 07, 2001 at 01:11:45PM -0500 , Michael Heldebrant <[EMAIL
PROTECTED]> wrote:
> On Sat, 2001-10-06 at 21:14, Torsten Kersting wrote:
> > im running woody/sid and did an update yesterday, since then I cant get
> > my mouse to work with a 2.4.x kernel anymore. Its a PS/2 mouse th
On Sat, 2001-10-06 at 21:14, Torsten Kersting wrote:
> Hi all,
> im running woody/sid and did an update yesterday, since then I cant get
> my mouse to work with a 2.4.x kernel anymore. Its a PS/2 mouse that works
> fine with kernel 2.2.19 (console and X) but with a 2.4.x kernel I cant
> start g
>also sprach Danie Roux (on Wed, 18 Jul 2001 08:28:52PM +0200):
>> My keyboard is on /dev/psaux. Where will my ps2 mouse be?
>
>usually /dev/psaux, but in general it is better to start GPM and then
>use /dev/gpmdata of type Microsoft (blech) for the mouse (in X i
>assume).
Be advised though th
also sprach Danie Roux (on Wed, 18 Jul 2001 08:28:52PM +0200):
> My keyboard is on /dev/psaux. Where will my ps2 mouse be?
usually /dev/psaux, but in general it is better to start GPM and then
use /dev/gpmdata of type Microsoft (blech) for the mouse (in X i
assume).
martin; (gree
On Wed, Jul 18, 2001 at 08:28:52PM +0200, Danie Roux wrote:
| Hi all,
|
| This should be easy, but I can't get it:
|
| My keyboard is on /dev/psaux. Where will my ps2 mouse be?
What kernel and what options?
I have kernel 2.4.8 with devfs, and my mouse happens to be in the USB
port right now. A
Danie Roux <[EMAIL PROTECTED]> writes:
DR> This should be easy, but I can't get it:
DR>
DR> My keyboard is on /dev/psaux. Where will my ps2 mouse be?
AT and PS/2 keyboards don't have device files in /dev to my
knowledge. /dev/psaux has always been for PS/2 mice.
--
David Maze [EMAIL PR
>My keyboard is on /dev/psaux. Where will my ps2 mouse be?
I always found my ps2 mouse on /dev/psaux
However, on many systems you would have /dev/mouse which is a symlink to
whatever real device your mouse is on.
Try following /dev/mouse if you have one.
Best regards
Johnny :o)
Danie Roux wrote:
> Hi all,
>
> This should be easy, but I can't get it:
>
> My keyboard is on /dev/psaux. Where will my ps2 mouse be?
>
> --
> Danie Roux *shuffle* Adore Unix
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Wed, Jul 18, 2001 at 08:28:52PM +0200, Danie Roux wrote:
> This should be easy, but I can't get it:
>
> My keyboard is on /dev/psaux. Where will my ps2 mouse be?
On the keyboard connector? ;-)
Cheers,
Joost
okay , i think you should tell X that the device you are to use is
/dev/psaux
Khavkine Igor wrote:
I have an Asus P5A motherboard and I'm
running Linux-2.4.5, custom compiled.
I have a problem using my PS/2 mouse port.
I have enabled PS/2 mouse support in
the kernel. I get this message
when the computer boots up:
...
Starting kswapd v1.8
Detected PS/2 Mouse Port. <-
Khavkine Igor wrote:
Try posting both your /etc/gpm.conf and the mouse section from your
/etc/X11/XF86config to the list. I'm using PS/2 mice on three different
systems under a few different kernels with no troubles at all.
--
Mike Werner KA8YSD | He that is slow to believe anything and
On Mon, 9 Jul 2001 01:35:08
Col. Mojo T. Wiggley wrote:
>
>- Original Message -
>From: Khavkine Igor <[EMAIL PROTECTED]>
>Newsgroups: linux.debian.user
>Sent: Sunday, July 08, 2001 7:20 PM
>Subject: PS/2 mouse problems
>
>
>> I have an Asus P5A motherboard and I'm
>> running Linux-2.4.5
Hmm, I think I'll try to boot with
2.2.9 and see if my PS/2 mous will work.
If it does, then it really might
be a bug that should be reported to
the kernel people. I'd really like to
get it to work because I'm running
out of serial ports. :-)
Igor
--
On Mon, 9 Jul 2001 02:58:45
zerog wrote
On Sun, Jul 01, 2001 at 08:43:04PM +0200, Joost Kooij wrote:
> 1st question: Are you also using gpm? Try turning that off and see if
> problems persist.
I have gpm running, but configured it to use only the serial mouse. (As
I don't want to use the repeater, and ps/2 mouse cannot be used by both
On Sun, Jul 01, 2001 at 07:53:18PM +0200, Hugo van der Merwe wrote:
> I've had problems with X input... basically, after doing some stuff, the
> keyboard and PS/2 mouse would stop working altogether... (the serial
> mouse still worked...) until I figured out to disable the PS/2 mouse. I
> am now op
On Sat, 14 Apr 2001, I asked the following question:
> Recently I've installed Debian 2.2 potato. I tried to make my mo
> use working under X but I can not. This is Logitech M-S48a PS/2
> mouse. It works great under gpm, but doesn't want even to move in
> X. I selected PS/2 as a mouse protocol
Edit XF86Config,
where /dev/psaux put /dev/gpmdata
BYe,
Ales
On Sat, 14 Apr 2001, Andrzej Swedrzynski wrote:
> Hello!
>
> Recently I've installed Debian 2.2 potato. I tried to make my mo
> use working under X but I can not. This is Logitech M-S48a PS/2
> mouse. It works great under gpm, but
In article <[EMAIL PROTECTED]>,
Andrzej Swedrzynski <[EMAIL PROTECTED]> wrote:
> Recently I've installed Debian 2.2 potato. I tried to make my mo
> use working under X but I can not. This is Logitech M-S48a PS/2
> mouse. It works great under gpm, but doesn't want even to move in
> X. I selected
On Sat, Apr 14, 2001 at 11:26:11AM +0200, Andrzej Swedrzynski wrote:
> mouse. It works great under gpm, but doesn't want even to move in
> X. I selected PS/2 as a mouse protocol and /dev/psaux for device
> (it works for gpm). What can I do now?
Try reading the repeated data from /dev/gpmdata. Yo
Maybe you should stop gpm before starting X.
Dieter
--- Andrzej Swedrzynski <[EMAIL PROTECTED]> wrote:
> Hello!
>
> Recently I've installed Debian 2.2 potato. I tried
> to make my mo
> use working under X but I can not. This is Logitech
> M-S48a PS/2
> mouse. It works great under gpm, but do
Turning off gpm is oneway but there is a better way.
Read from /dev/gpmdata and read with intellimouse or ms mode
if you are using default /etc/gpm.conf.
There areadvantage to do this. No matter what happens
with mouse, you do not need to restart X but simply
restart gpm which get everything in
Hi,
On Mon, 12 Feb 2001, Tom Schuetz wrote:
> I have a PS/2 mouse. My XF86config file is set to /dev/psaux.
> My mouse doesn't do anything upon starting X.
>
> So I tried making a soft link from /dev/psaux to /dev/mouse. Nada.
Do you have gpm installed? If yes, you should set Section pointer
"Tom Schuetz" <[EMAIL PROTECTED]> writes:
> I have a PS/2 mouse. My XF86config file is set to /dev/psaux.
> My mouse doesn't do anything upon starting X.
Are you running GPM? GPM and X can conflict when running at the same
time. There's a solution: Configure GPM as a 'Repeater' and then
configur
Are you running gpm?
Trying turning gpm off..
/etc/init.d/gpm stop
- Original Message -
From: "Tom Schuetz" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, February 13, 2001 2:00 AM
Subject: PS/2 mouse mystery
> I have a PS/2 mouse. My XF86config file is set to /dev/psaux.
> My mouse doesn't d
On Sun, Dec 17, 2000 at 08:31:24PM +, john gennard wrote:
> I've built a third box to experiment and learn - it's time I really
> Now whilst the mouse works with each of the three non-Debian distros,
> it does not with either Storm or Potato (I mean within X). I think
> I've traced the proble
This is just a shot in the dark, but do you happen to have your mouse set to
/dev/gpmdata in you XF86Config? If so, trying setting it to /dev/psaux or
/dev/mouse and see if the same behavior happens.
-Rob
On Mon, Dec 04, 2000 at 04:55:42AM -0500, Christopher Mosley wrote:
>
> When starting linu
> did you get the adapter *with* the mouse?
I found a serial mouse and put it in ttyS0. Everything works great. Thanks for
the suggestions.
[EMAIL PROTECTED]
On Mon, Dec 04, 2000 at 07:35:08PM +1300, C. Falconer wrote:
> >Yes, there is a modem at ttyS3
> >I also tried everything on ttyS0, nothing there either.
>
> Theres the problem - your modem on com4 and your mouse on com2 have IRQ
> conflict. Set your modem to IRQ 2 or 9 if you can - that seems t
At 05:06 PM 12/3/00 -0800, you wrote:
On Sun, Dec 03, 2000 at 10:19:33PM +, Karl E. Jørgensen wrote:
> You said two serial ports, but this one lists 4? Do you have a modem in
there as well?
Yes, there is a modem at ttyS3
I also tried everything on ttyS0, nothing there either.
Theres th
On Sun, 3 Dec 2000, jakemsr wrote:
> works as a PS/2 on a PS/2 port with X), and a PS/2 to serial
> adapter. I've got the mouse/adapter in "com2". /dev/mouse is a symlink
Why did you put it in COM2? Plug the mouse into COM1/ttyS0 and smylink
/dev/mouse to /dev/ttyS0. Then give gpm a shot. I d
did you get the adapter *with* the mouse? there are many adapters that
are not compadible with brands other then the mouse they come with, and
some can't even be converted at all for some reason or another(only had
that with 1 trackball though).
in short, if the adapter didn't come with the mouse,
On Sun, Dec 03, 2000 at 10:19:33PM +, Karl E. Jørgensen wrote:
> # cat /dev/ttyS1
nothing happens
nothing happens after gpm -D either
> You said two serial ports, but this one lists 4? Do you have a modem in there
> as well?
>
Yes, there is a modem at ttyS3
I also tried everything on t
> I was given an old Pentium 75. It has two serial ports on the back, one
> labeled "mouse" and one labeled "com2". No PS/2 ports. I can't seem to find
> any real serial port mice, so I got a cheapo PS/2 (micro solutions, works as
> a PS/2 on a PS/2 port with X), and a PS/2 to serial adapter. I'
Hi:
When you set up your mouse, did you change the device name to '/dev/psaux'?
In debian 2.2 setup, the default is set to '/dev/mouse' and you have to
change it. I found it confuding, too, because in 2.1, the default was set to
'/dev/psaux'.
Seung-woo Nam
- Original Message -
From: <[EMA
/ Jay Ford <[EMAIL PROTECTED]> was heard to say:
| On Thu, 30 Nov 2000 [EMAIL PROTECTED] wrote:
| > Network problems I expected, but this one I didn't: the mouse
| > isn't working. The machine says it detects the PS/2 Mouse Port,
| > but when I start gdm, the mouse pointer won't move.
| >
| > What
On Thu, 30 Nov 2000 [EMAIL PROTECTED] wrote:
> Network problems I expected, but this one I didn't: the mouse
> isn't working. The machine says it detects the PS/2 Mouse Port,
> but when I start gdm, the mouse pointer won't move.
>
> What else should I be checking for?
Here's what works for me:
_
Network problems I expected, but this one I didn't: the mouse
isn't working. The machine says it detects the PS/2 Mouse Port,
but when I start gdm, the mouse pointer won't move.
Are you running gpm?
I had this problem when gpm was running, so I deleted gpm and everything
works fine. However, if
On Fri, 3 Nov 2000, sena wrote:
> I heard that Walter Tautz wrote this on 03/11/00:
>
> > XF86Config has
> > Protocol "ps/2"
> > Device "/dev/mouse"
> >
> >
> > where /dev/mouse is a softlink to /dev/gpmdata
> >
> I have a Microsoft (yeah, I know) Intellimouse (the ones with the wheel)
> co
Is it a wheel mouse? Your symptoms sound like it is one of the
HP rebranded Logitech Wheel Mice. They use the IMPS/2 protocal.
Greg
* Walter Tautz ([EMAIL PROTECTED]) wrote:
> Ok I have a PS/2 mouse with HP name on it. I have checked the plug
> and it definitely has 6 pins in it. Now when
Check /etc/gpm.conf, mine is:
# /etc/gpm.conf - configuration file for gpm(1)
#
# If mouse response seems to be to slow, try using
# responsiveness=15. append can contain any random arguments to be
# appended to the commandline.
#
# If you edit this file by hand, please be aware it is sourc
Not a solution, I'm afraid, but I have also witnessed similar problems
lately trying to do the same thing.
X, with the appropriate pointer settings, fails to recognise the mouse.
Probably more interestingly, if I tell GPM to use the PS/2 mouse, when i
move the mouse, the console will freeze, requ
Hello,
Maybe you can edit the /etc/X11/XF86Config file in Section "Pointer"
Section "Pointer"
Protocol "IMPS/2"
Device"dev/psaux"
EndSection
Greetings,
Stefan
On Mon, Oct 09, 2000 at 08:07:41AM -0500, Cavaiani, Don wrote:
> Greetings,
>
> I had Debian Linux up an running ju
Hi,
What is your mail address???
Are you from Japan?? Mailheader is crypting and your host address
does not resolve from USA.
Anyway,
Try disable gpm! by editing /etc/rc2.d/
I could booted from my SMP (BP-6) with this trick.
Otherwise, kernel crashed hard in my case.
Just an idea.
Osamu
BT
Bingo!
Recompiled the kernel to get rid of unused stuff.
I now added ps/2 mouse support, works OK.
Thanks.
On Sun, 1 Oct 2000, serge delorme wrote:
>Xwindow gives me that message:
>"Cannot open mouse" (no device of that type)"
>
>Any ideas ?
>
It sounds like kernel support is missing. Are yo
At 08.32 1/10/00 +0900, Jack Morgan ha escrit:
>I just installed a new motherboard. I'm running woody on the only HDD.
When i plug in the PS/2 mouse the system hangs during the boot strap
process. If I unplug the PS/2 mouse it boots fine, but hangs when I use
X-windows.
>Is this an irq issue or s
On Sun, 1 Oct 2000, serge delorme wrote:
>Xwindow gives me that message:
>"Cannot open mouse" (no device of that type)"
>
>Any ideas ?
>
It sounds like kernel support is missing. Are you running a custom
kernel?
Brent
1 - 100 of 144 matches
Mail list logo
