-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 24/02/14 12:29, Rob Owens wrote:
> On Sat, Feb 22, 2014 at 11:29:40PM -0300, Markos wrote:
>> Tomorrow I'll change the network card of the server and see if
>> the problem is on the network card.
>>
> Check to see if the network cable is cat 5, cat
On 22-02-2014 23:57, Scott Ferguson wrote:
On 23/02/14 13:09, Markos wrote:
On 22-02-2014 20:11, Scott Ferguson wrote:
On 23/02/14 09:58, Stephen Powell wrote:
On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
I'm trying to configure a machine with two netw
On Sat, Feb 22, 2014 at 11:29:40PM -0300, Markos wrote:
> Tomorrow I'll change the network card of the server and see if the
> problem is on the network card.
>
Check to see if the network cable is cat 5, cat 5e, or cat 6. If you
have a gigabit speed network card, it might reject a cat 5 cable.
On Sun, Feb 23, 2014 at 07:15:20AM -0500, Dan Purgert wrote:
> It's been ages since I've done routing on a 2-NIC PC/router. I've probably
> gotten something a bit wrong.
>
I *think* for the pc to act as a router you need to have:
net.ipv4.ip_forward=1
in /etc/sysctl.conf
Then you configure yo
On Du, 23 feb 14, 21:08:22, Rod James Bio wrote:
>
> If you are having problems with DHCP then why not set eth1 to a static IP?
Because the root problem could also prevent the static configuration
from working? The OP has already determined that the DHCP server in the
router works with other de
On 2/23/14, 10:09, Markos wrote:
> On 22-02-2014 20:11, Scott Ferguson wrote:
>> On 23/02/14 09:58, Stephen Powell wrote:
>>
>>> On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
>>>
I'm trying to configure a machine with two network cards to share
Internet access to an inte
On 23/02/2014 06:28, Andrei POPESCU wrote:
> On Sb, 22 feb 14, 20:55:28, Dan Purgert wrote:
>>
>> Now, the downside to this approach is that devices connected to the Wifi AP
>> of
>> the Huawei device will not be able to communicate with the stuff behind the
>> *nix
>> server. An easier solution
> On 23/02/14 13:09, Markos wrote:
>
> Any suggestions of what I should check?
Check that you have a DHCP client installed supported by the "dhcp"
method in /etc/network/interfaces. List in man interfaces : dhclient,
pump, udhcpc, dhcpcd. Usually dhclient (currently provided by package
isc
On Sb, 22 feb 14, 19:22:16, Markos wrote:
> Hi all,
>
>
> I'm trying to configure a machine with two network cards to share
> Internet access to an internal network
>
> the /etc/network/interface is:
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
> auto eth0
> iface
On Du, 23 feb 14, 09:57:38, Scott Ferguson wrote:
> On 23/02/14 09:22, Markos wrote:
> > Hi all,
> >
> >
> > I'm trying to configure a machine with two network cards to share
> > Internet access to an internal network
> >
> > the /etc/network/interface is:
> >
> > # The loopback network interfa
On Sb, 22 feb 14, 20:55:28, Dan Purgert wrote:
>
> Now, the downside to this approach is that devices connected to the Wifi AP of
> the Huawei device will not be able to communicate with the stuff behind the
> *nix
> server. An easier solution (IMO) would be something like the following:
>
> 1.
On 23/02/14 13:09, Markos wrote:
> On 22-02-2014 20:11, Scott Ferguson wrote:
>> On 23/02/14 09:58, Stephen Powell wrote:
>>
>>> On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
>>>
I'm trying to configure a machine with two network cards to share
Internet access to an inte
On 22-02-2014 22:55, Dan Purgert wrote:
On 22/02/2014 18:11, Scott Ferguson wrote:
On 23/02/14 09:58, Stephen Powell wrote:
On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
I'm trying to configure a machine with two network cards to share
Internet access to an internal
On 22-02-2014 20:11, Scott Ferguson wrote:
On 23/02/14 09:58, Stephen Powell wrote:
On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
I'm trying to configure a machine with two network cards to share
Internet access to an internal network
the /etc/network/interface is:
# The l
On 22/02/2014 18:11, Scott Ferguson wrote:
> On 23/02/14 09:58, Stephen Powell wrote:
>> On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
>>>
>>> I'm trying to configure a machine with two network cards to share
>>> Internet access to an internal network
>>>
>>> the /etc/network/interface i
On 23/02/14 09:58, Stephen Powell wrote:
> On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
>>
>> I'm trying to configure a machine with two network cards to share
>> Internet access to an internal network
>>
>> the /etc/network/interface is:
>>
>> # The loopback network interface
>> auto l
On Sat, 22 Feb 2014 17:22:16 -0500 (EST), Markos wrote:
>
> I'm trying to configure a machine with two network cards to share
> Internet access to an internal network
>
> the /etc/network/interface is:
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
> auto eth0
> ifac
On 23/02/14 09:22, Markos wrote:
> Hi all,
>
>
> I'm trying to configure a machine with two network cards to share
> Internet access to an internal network
>
> the /etc/network/interface is:
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
> auto eth0
> iface eth0 inet
18 matches
Mail list logo
