It seems that at least switching to the other card doesn't seem to lead
to overruns and errors.
I'll have to run some transfers to be sure.
Thanks lots for the help!
Is there others here who know about software channel bonding in Linux?
It would be an interesting thing to do.
Calyth
--
To UNSUB
Well I got a spare 3c509 that has not been used. I suppose I could try
that card too. I got no spare cable, but if the spare card is also
having problems, that would give me a good idea what's going on.
Thanks all for the help!
Calyth
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
On Tue, 2003-03-11 at 14:29, Jason M. Harvey wrote:
>
> actually, i had the same exact problem! mine was an isa 3com, i think
> the 3c509c...
Me too, I had two 3c509 ISA (out of the three I had) die in similar ways
in the few last weeks. I guess they are beginning to show their age.
signature.
On Tue, 2003-03-11 at 05:03, Calyth wrote:
> I've been using 3c509b cards before, but it seems that this one, at a
> uptime of 8 days, as a samba server, it have encountered 182 errors and
> 185 overruns upon receiving 838.6 "MiB" (excuse my ignorance, but I
> can't recall what MiB means. It has
said Calyth (on 2003-03-11),
> 185 overruns upon receiving 838.6 "MiB" (excuse my ignorance, but I
> can't recall what MiB means. It has to be something bytes, but what?)
>From http://www.anandtech.com/guides/viewfaq.html?i=136
Giga- A Prefix meaning 1 Billion, or 10^9 of something.
Hi,
On Tue, 11 Mar 2003, Calyth wrote:
> I've been using 3c509b cards before, but it seems that this one, at a
> uptime of 8 days, as a samba server, it have encountered 182 errors and
> 185 overruns upon receiving 838.6 "MiB" (excuse my ignorance, but I
> can't recall what MiB means. It has to b
Sounds more likely to be a hardware problem. Check cables with a cable
tester and try changing the network card.
These problems aren't normal and a 486/32MB ram configured as a samba server
for a small no of users should be ok.
To answer the question on ethernet card bonding, it's possible to ge
On Sat, 9 May 1998, jscogin wrote:
> I use the install program to install my Ethernet card. It finds the address
> and IRQ. I then configure the name and IP address. It says it is configuring
> the driver eth0. I then install the kernal, but when I reboot, the eth0
> driver is not loaded and it sa
On Sat, 7 Jun 1997, Jesse Goldman wrote:
> Hi,
>
> I've just put a 3c900 card in my linux machine and it's giving me
> problems. Kernel version is 2.0.30. From what I could ascertain, the new
> version of 3c59x.c is a plug-in replacement for the old one without 3c900
> support. Accordingly, I rep
9 matches
Mail list logo
