Solved the mount problem with Etch :)
I had to disable device-mapper. I followed the instructions in the
following posting and commented out all references to dm-mod and dm-mirror.
http://www.linuxquestions.org/questions/showthread.php?t=494987
Cheers, Brendan.
Brendan Simon wrote:
I'm
On Fri, 2007-04-20 at 15:36 +1000, Brendan Simon wrote:
> I'm thinking that the problem may not be the kernel after all. I
> rebooted using the 2.6.8 kernel and it still didn't work, so now I'm
> thinking it may be something in Etch rather than the kernel ??
>
> Should the 2.6.8 Sarge kernel wo
I'm thinking that the problem may not be the kernel after all. I
rebooted using the 2.6.8 kernel and it still didn't work, so now I'm
thinking it may be something in Etch rather than the kernel ??
Should the 2.6.8 Sarge kernel work with an Etch installation ??? It is
an upgrade from Sarge to
On Fri, Apr 20, 2007 at 10:58:35AM +1000, Brendan Simon wrote:
> Roberto C. Sánchez wrote:
> >>mdadm is not installed.
> >>My adaptec raid card provides hardware raid, so I don't think I need
> >>mdadm. I certainly did not need it when I was running Sarge/2.6.8, so
> >>I presume that shouldn't n
Roberto C. Sánchez wrote:
mdadm is not installed.
My adaptec raid card provides hardware raid, so I don't think I need
mdadm. I certainly did not need it when I was running Sarge/2.6.8, so I
presume that shouldn't need it for Etch/2.6.18.
My mistake. Were you using an in-tree driver f
Roberto C. Sánchez wrote:
On Fri, Apr 20, 2007 at 09:43:15AM +1000, Brendan Simon wrote:
I upgraded a backup server from Sarge (2.6.8) to Etch (2.6.18) and it
now fails to boot.
Have you checked that "AUTOSTART=true" is set in /etc/default/mdadm?
Did you read and follow the instructio
On Fri, Apr 20, 2007 at 10:34:12AM +1000, Brendan Simon wrote:
> Roberto C. Sánchez wrote:
> >On Fri, Apr 20, 2007 at 09:43:15AM +1000, Brendan Simon wrote:
> >
> >>I upgraded a backup server from Sarge (2.6.8) to Etch (2.6.18) and it
> >>now fails to boot.
> >>
> >>
> >Have you checked that
On Fri, Apr 20, 2007 at 09:43:15AM +1000, Brendan Simon wrote:
> I upgraded a backup server from Sarge (2.6.8) to Etch (2.6.18) and it
> now fails to boot.
>
Have you checked that "AUTOSTART=true" is set in /etc/default/mdadm?
Did you read and follow the instructions in
/usr/share/doc/mdadm/READM
I upgraded a backup server from Sarge (2.6.8) to Etch (2.6.18) and it
now fails to boot.
It is getting stuck because it fails an fsck.ext3 on /dev/sda1.
/dev/sda1 is an ADAPTEC RAID card with a number of hard disks. The
module dpt_i2o is loaded. None of the i2o_* modules are loaded.
I can
I feel a little sheepish, but let me post this in case any other sheep
like me happen by this way.
The problem is to get the updated driver. I understood this to be in
the kernel already but it is not in Debian's kernel (as of May 2006), so
one cannot use Debian's installer on a system that acces
Hi,
I am unable to install Debian on a Supermicro server configured with 2
sata harddrives connected to an Adaptec 2420SA serial RAID pci card.
Although the exact sequence of events differ, I have tried both the
stable and testing installers, each with both 2.4 and 2.6 kernel
choices. In every c
PROTECTED]
Sent: vrijdag 27 februari 2004 18:45
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Install debian on raid system
On Friday 27 February 2004 08:21, [EMAIL PROTECTED] wrote:
> Hello everybody,
>
> I'm trying to install debian on a raid system (Promise FastTrak s15
On Friday 27 February 2004 08:21 am, [EMAIL PROTECTED] wrote:
> Hello everybody,
>
> I'm trying to install debian on a raid system (Promise FastTrak s150 sx
> with 3 SATA drives), I downloaded the netinstall iso and tried installing.
> Unfortunately the drivers for the raid car
On Friday 27 February 2004 08:21, [EMAIL PROTECTED] wrote:
> Hello everybody,
>
> I'm trying to install debian on a raid system (Promise FastTrak s150 sx
> with 3 SATA drives), I downloaded the netinstall iso and tried
> installing. Unfortunately the drivers for the raid card
Hello everybody,
I'm trying to install debian on a raid system (Promise FastTrak s150 sx
with 3 SATA drives), I downloaded the netinstall iso and tried installing.
Unfortunately the drivers for the raid card aren't there and I don't seem
te be able to find them anywhere on the net
ler (ASUS PC-DL). The BIOS recognizes
> my RAID system, however debian (testing) doesn't. I guess it's a kernel
> driver problem, but I have no idea what to include in my kernel.
>
> Thanks,
> Ron
>
> PS. Could you please cc any replies to me because I'm not on the
On Thu, 16 Oct 2003 14:03:15 +0200
"Ron Rademaker" <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I'm trying to get RAID to work on my server. I got 2 disks (80 GB ATA)
> and a motherboard with RAID controller (ASUS PC-DL). The BIOS
> recognizes my RAID system, howev
Hello,
I'm trying to get RAID to work on my server. I got 2 disks (80 GB ATA)
and a motherboard with RAID controller (ASUS PC-DL). The BIOS recognizes
my RAID system, however debian (testing) doesn't. I guess it's a kernel
driver problem, but I have no idea what to include in my k
18 matches
Mail list logo
