Muhammad Yousuf Khan wrote:
> @bob
> if you mean speed and duplex mode then here is the detail
I wanted to see it say it was full duplex and whatever speed it had
negotiated.
> Speed: 1000Mb/s
> Duplex: Full
That says that it has linked and negotiated okay. In problem cases
where auto-negotiati
On Tuesday, September 2, 2014 3:50:02 PM UTC+2, Muhammad Yousuf Khan wrote:
> i am using wheezy 7.x and for some unknown reason my network speed drop down
> to 10MBPS.
> i can see anything in /var/log/messages and /var/log/syslog related to the
> issue. when i restart the server it back to norma
On Wed, 3 Sep 2014 14:25:14 +0500
Muhammad Yousuf Khan wrote:
> @Bzzz, cables are self made.
Then did you respect the wiring code of colors,
and what is the length of these?
--
BTW, why don't you have optical fiber in your building?
The last time I asked the property management company, they
@Bzzz, cables are self made.
@bob
if you mean speed and duplex mode then here is the detail
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertise
Muhammad Yousuf Khan wrote:
> i am using wheezy 7.x and for some unknown reason my network speed drop
> down to 10MBPS.
> i can see anything in /var/log/messages and /var/log/syslog related to the
> issue. when i restart the server it back to normal and shows above 50MBPS
> while transferring file.
On Tue, 2 Sep 2014 18:44:39 +0500
Muhammad Yousuf Khan wrote:
> i am using wheezy 7.x and for some unknown reason my network speed
> drop down to 10MBPS.
> i can see anything in /var/log/messages and /var/log/syslog
> related to the issue. when i restart the server it back to normal
> and shows a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, Jul 24, 2003 at 09:46:19AM -0400, Mike Dresser wrote:
> > If it's running at 10Mbit, it will never be full duplex. If you're
> > running at 100, then it could be full or half. If your network cables
> > only have four leads connected, you're
On Thu, 24 Jul 2003, Paul Johnson wrote:
> If it's running at 10Mbit, it will never be full duplex. If you're
> running at 100, then it could be full or half. If your network cables
> only have four leads connected, you're using 10.
Actually, you can have full duplex on 10BaseT.
100BaseT runs o
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, Jul 22, 2003 at 07:44:13PM -0400, Dan Jones wrote:
> Is there a straightforward way to determine what speed (10 or 100mbs) a
> NIC is running? How about to determine if it is in half or full duplex
> mode?
If it's running at 10Mbit, it will n
On Tue, Jul 22, 2003 at 07:44:13PM -0400, Dan Jones wrote:
> Is there a straightforward way to determine what speed (10 or 100mbs) a
> NIC is running? How about to determine if it is in half or full duplex
> mode?
racoon:~# apt-cache show mii-diag
Package: mii-diag
Priority: extra
Section: net
In
Have you tried using 'ethtool'?
[EMAIL PROTECTED]:~$ dpkg -s ethtool
Package: ethtool
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 156
Maintainer: Eric Delaunay <[EMAIL PROTECTED]>
Version: 1.7-1
Depends: libc6 (>= 2.2.4-4)
Conflicts: sparc-utils (<< 1.9-1)
Descriptio
It was written:
__
I´m a network engineer for a living, and trust me, the only way to be
sure there won´t be something wrong with autodetection is to avoid it.
Setting speed and duplex on _both_ sides of an ethernet link
On Tue, 03 Jul 2001 17:20:47 EDT, Jeld The Dark Elf writes:
>On Tue, Jul 03, 2001 at 09:53:58PM +0200, Robert Waldner wrote:
>> I?m a network engineer for a living, and trust me, the only way to be
>> sure there won?t be something wrong with autodetection is to avoid it.
>>
>> Setting speed and
On Tue, Jul 03, 2001 at 09:53:58PM +0200, Robert Waldner wrote:
> I?m a network engineer for a living, and trust me, the only way to be
> sure there won?t be something wrong with autodetection is to avoid it.
>
> Setting speed and duplex on _both_ sides of an ethernet link is a Good
> Thing. A
>On Tue, Jul 03, 2001 at 06:11:11PM +0300, virtanen wrote:
>> some of our computer engineers are telling me that my debian box
>> ('Potato') ethernet card should be fixed to a static speed (10,5). (Some
>> others are telling just the opposite...)
I´m a network engineer for a living, and trust me
On Tue, Jul 03, 2001 at 06:11:11PM +0300, virtanen wrote:
>
> Hi,
>
> some of our computer engineers are telling me that my debian box
> ('Potato') ethernet card should be fixed to a static speed (10,5). (Some
> others are telling just the opposite...)
>
> How to do it?
> Where is the configur
it's done through 'iproute(2?)'.
basically, create a channel, and divert a subchannel of whatever speed u
want. moreover, i dun understand your question completely.
--
k h a o s * lamer
new name, new look, new ftp:
linux.dyn.dhs.org (change FOUR letter)
upload something before downloading, or y
17 matches
Mail list logo
