Joseph A Nagy Jr wrote:
Kent West wrote:
Yes. But if you hadn't already loaded the tulip module (or if you
remove it with "rmmod tulip") you can also run "modconf" and select
the tulip driver, which will both install the module into the kernel
and place it into /etc/modules so you don't have t
I feel so stupid!! in /etc/network/interfaces, I had iface et0 inet
dhcp! Not iface eth0 inet dhcp.
I am so sorry to have wasted everyone's time.
--
Let me meddle not in the affairs of Linuxen
For I am an idiot and will toast my boxen.
http://www.hsv-hotspots.com/
Your hotspot for Wireless in
Kent West wrote:
Joseph A Nagy Jr wrote:
nate wrote:
Joseph A Nagy Jr said:
I have a LinkSys Fast Ethernet 10/100 Network Anywhere, model number
NC100U. I know it works as I was able to use it under RedHat. I cannot
for the life me figure out what packages to install (other then dhcp,
which i
Joseph A Nagy Jr wrote:
nate wrote:
Joseph A Nagy Jr said:
I have a LinkSys Fast Ethernet 10/100 Network Anywhere, model number
NC100U. I know it works as I was able to use it under RedHat. I cannot
for the life me figure out what packages to install (other then dhcp,
which is installed and r
nate wrote:
Joseph A Nagy Jr said:
DHCP Client works, but I cannot ping anything (I can't ping the router
(192.168.1.1 (router) or 192.168.1.10 (this comp). I have already
rebooted the system, too.
can you provide the output of 'dmesg', preferably limit the output
to just the segment where the
Joseph A Nagy Jr said:
> DHCP Client works, but I cannot ping anything (I can't ping the router
> (192.168.1.1 (router) or 192.168.1.10 (this comp). I have already
> rebooted the system, too.
can you provide the output of 'dmesg', preferably limit the output
to just the segment where the ethernet
nate wrote:
Joseph A Nagy Jr said:
So, I just put "tulip" at the bottom of the list and that's it?
for the next time your system starts.. in the meantime 'modprobe tulip'
Did that.
once that's done restart networking /etc/init.d/networking restart
and check ifconfig
Did that.
I'm reading
> Joseph A Nagy Jr said:
> > I have a modem and a NIC. The modem is a PCI WinModem (forget brand atm),
> > the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model number
> > NC100U. I know it works as I was able to use it under RedHat. I cannot
> > for the life me figure out what packa
Joseph A Nagy Jr said:
> So, I just put "tulip" at the bottom of the list and that's it?
for the next time your system starts.. in the meantime 'modprobe tulip'
once that's done restart networking /etc/init.d/networking restart
and check ifconfig
> I'm reading ftp://ftp.scyld.com/pub/network/t
nate wrote:
Joseph A Nagy Jr said:
I have a modem and a NIC. The modem is a PCI WinModem (forget brand atm),
the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model number
NC100U. I know it works as I was able to use it under RedHat. I cannot
for the life me figure out what packages t
Hugh Saunders wrote:
On Sun, Mar 09, 2003 at 04:58:39PM -0600, Joseph A Nagy Jr wrote:
I have a modem and a NIC. The modem is a PCI WinModem (forget brand
atm), the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model
number NC100U. I know it works as I was able to use it under RedHat.
Joseph A Nagy Jr said:
> I have a modem and a NIC. The modem is a PCI WinModem (forget brand atm),
> the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model number
> NC100U. I know it works as I was able to use it under RedHat. I cannot
> for the life me figure out what packages to ins
On Sun, Mar 09, 2003 at 04:58:39PM -0600, Joseph A Nagy Jr wrote:
> I have a modem and a NIC. The modem is a PCI WinModem (forget brand
> atm), the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model
> number NC100U. I know it works as I was able to use it under RedHat. I
> cannot for
I have a modem and a NIC. The modem is a PCI WinModem (forget brand
atm), the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model
number NC100U. I know it works as I was able to use it under RedHat. I
cannot for the life me figure out what packages to install (other then
dhcp, which i
14 matches
Mail list logo
