On Wed, Nov 19, 2014 at 11:59:17AM +0100, Achim Spreen wrote:
> Hello.
> eth0 now is up after boot. I have resolved the configuration of the
> isc-dhcp-server, it has needed 'INTERFACES="eth0"' in
> 'etc/default/dhcp3-server'.
>
> But LAN still not works and the output of ethtool is the same as be
Hello.
eth0 now is up after boot. I have resolved the configuration of the
isc-dhcp-server, it has needed 'INTERFACES="eth0"' in
'etc/default/dhcp3-server'.
But LAN still not works and the output of ethtool is the same as
before: ..., Speed: Unknown, Duplex: Unknown,..., Link detected: no.
Hans wrote:
Hi Achim!
Is the device not available at all or dop you hvae some other device
like
"eth1" (instead of eth0)?
Best
Hans
Hello Hans.
With 'ifconfig eth0' i can see the card, and with 'ifconfig eth0 up' i
can bring eth0 up, but it's still not reachable and the output from
'ethtool
Am Mittwoch, 12. November 2014, 12:09:22 schrieb Achim Spreen:
> Hello.
> I have a desktop PC with AMD Sempron, a Nvidia MCP51 (on board)
> Ethernet controller, Debian 7.6-amd64, Lxde and this problems with eth0:
> eth0 is not up after bootup, not at irq 21 or other irq, Speed: Unknown,
> Duplex: U
Hello.
I have a desktop PC with AMD Sempron, a Nvidia MCP51 (on board)
Ethernet controller, Debian 7.6-amd64, Lxde and this problems with eth0:
eth0 is not up after bootup, not at irq 21 or other irq, Speed: Unknown,
Duplex: Unknown, Link detected: no
The cable is o.k. and connected.
# /etc/n
5 matches
Mail list logo
