Re: Network problems with Vortex Adapter... outputs

q q

Re: Network problems with Vortex Adapter... outputs.... kernel 2.0.34

thanks for the quick repsonse...I was unable to get to the machine for a week...   here's the output you asked for   output of ping ping: sendto:operation not performed ping: wrote: 202.186.1.10 64 chars, ret=-1   output of route -n Kernel IP routing table   Destination Gateway

Re: Network problems with Vortex Adapter... outputs

thanks for the quick repsonse...I was unable to get to the machine for a week...   here's the output you asked for   output of ping ping: sendto:operation not performed ping: wrote: 202.186.1.10 64 chars, ret=-1   output of route -n Kernel IP routing table   Destination Gateway G

Re: Network problems with Vortex Adapter

thanks for your response I had infact been using the same network adapter with Debian 1.3 and it worked well the problem started with Debian version 2.0 with kernel 2.0.34. Red Hat running the 2.0.34 kernel works fine. I will follow your suggetsions and get back to you with the result. Nils-

Re: Network problems with Vortex Adapter

I have had similar problems with 3c905b. The trouble is propbably that the PCI card is in the first PCI slot, the bios has problems reporting it to the kernel. Check the /proc/pci what irq it has, if no irq is shown than its the PCI slot. You can either change position of the card or turn PCI to m

Network problems with Vortex Adapter

Hi I'm running Hamm on a Micron Millenia XKU 333 with a 3Com Etherlink 905B PCI installed. The kernel is configured with the correct Vortex driver but the adapter does not connect with or even see the other machines on the network. It has the correct IP address and can 'ping' itself but no other