Well, I am installing potato from scratch (boot floppies 5-July-2000) in
a COMPAQ Prolinea 5100. The CDROM modules (2 of them) that come with
boot floopies failed to install, one of them even caused kernel panic at
some point. The CDROM is a Mitsumi CRMC-FX162T4. Any ideas?
Thanks,
Antonio.
Sorry I didn't post sooner. I'm trying to get caught up with my mail.
You didn't need to set the jumpers back to their defaults. you could
have them set to anything. you just need to know what they're set to.
I have my mcd at 0x340, IRQ 10. In my /etc/modutils/modules I added the
line:
I have good personal news. I got the kernel to accept my cdrom module for
my old mitsumi. I pulled the interface card and discovered that nothing
seemed to be set to default. I tried changing the I/O jumper to default and
the IRQ switches to default and modconf recognized the first time. I am
jubil
At 12:00 PM 10/16/99 +0200, you wrote:
>Try this as root :
>
># modprobe mcd
/lib/modules/2.0.36/cdrom/mcd.o: init_module: Device or resource busy
># mount /dev/mcd /cdrom -t iso9660 -o ro
mount: the kernel does not recognize /dev/mcd as block device (maybe
'insmod driver'?)
>If that doesn't
On Fri, 15 Oct, 1999 à 11:39:23PM -0600, jh wrote:
> I am resubmitting my question with a little more clarity. Sorry for the
> redundancy.
>
> I got Debian installed. I currently do not have my cdrom mounted. I
> could not find any way to mount it during the installation. I also do not
> have a wo
I am resubmitting my question with a little more clarity. Sorry for the
redundancy.
I got Debian installed. I currently do not have my cdrom mounted. I
could not find any way to mount it during the installation. I also do not
have a workable modem for this computer so I did not do a ppp connection
On Fri, Jun 11, 1999 at 01:25:27PM -0600, David Brode wrote:
> My goal is to get dselect to recognize my cdrom drive so that I can
> install applications.
>
> After booting the OS & logging on as /, I enter dselect. I choose [0.
> Access] and select multicd. The cd is in the drive. System respon
>> mcd=0x320,9: Mitsumi status, type and version: 10 D 2 Double Speed CD ROM
>and it also says:
>> Failed initialization of WD-7000 SCSI card!
>> scsi: o hosts
>> scsi: detected total
>
>More hardware info: Micron 486DX 100, CD is Mitsumi FX001D. The
>interface card on the CD says CD-ROM Drive 1
My goal is to get dselect to recognize my cdrom drive so that I can
install applications.
After booting the OS & logging on as /, I enter dselect. I choose [0.
Access] and select multicd. The cd is in the drive. System responds:
>I see that /dev/cdrom exists and is a block device. Insert the CD
"Se or" Bueno wrote:
> Using a Mitsumi 2x cdrom
> connected to an Aztec 8 bit sound card. It is a propriatary driver. The
> setup seems to recognize it with a boot parameter entered because of the
> IO and IRQ ( linux mcdx=0x320, 11). After getting the
Running a 486/66/424/20 nothing but Linux. Using a Mitsumi 2x cdrom
connected to an Aztec 8 bit sound card. It is a propriatary driver. The
setup seems to recognize it with a boot parameter entered because of the
IO and IRQ ( linux mcdx=0x320, 11). After getting the base system loaded
: Resq disk,
11 matches
Mail list logo
