Hey Brian,
> I did this, although usually I extract only the kernel and the initrd.
In that case you need an initrd with the loop module added, I tried to
keep this as simple as possible.
> I didn't expect this to work and indeed it didn't. My understanding is
> that an ext* module is not availa
On Wed 08 May 2013 at 21:40:56 +0200, Julian Rüger wrote:
> 1. Booting from USB flash, USB hard drive, or internal hd, is basically
> all the same. You first need to install grub2 on it. If you already have
> a running system with grub2 on the hd you want to boot the installer
> from, you can skip
Oh, one more thing:
> The entry should look like this:
>
> menuentry "Debian 7.0 wheezy installer, x86_64" {
> linux /debian_iso/install.amd/vmlinuz priority=low vga=788 --
> initrd /debian_iso/install.amd/initrd.gz
> }
This will set the installer to "expert mode", leave out priorit
Hello together,
it seems you are all thinking way too complicated. As I suggested in the
other thread, I'm just gonna post a little howto.
So, here it goes:
1. Booting from USB flash, USB hard drive, or internal hd, is basically
all the same. You first need to install grub2 on it. If you already
On Tue 07 May 2013 at 20:11:40 -0700, Dan Hitt wrote:
[Snip]
> Instead, i want to devote a small partition to the project: i would
> like to ideally place just an iso image on the partition, but i guess
> it could be larger, but no more than a few G. I would like to then
> install from the iso p
On Tue, 07 May 2013 20:11:40 -0700, Dan Hitt wrote:
> Suppose that i don't want to make a bootable usb stick, or burn a cd,
> or burn a dvd.
Yes, as long as you can boot into GRUB2.
Check my reply in other thread.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subj
On Tue, May 7, 2013 at 8:11 PM, Dan Hitt wrote:
> ...
> Instead, i want to devote a small partition to the project: i would
> like to ideally place just an iso image on the partition, but i guess
> it could be larger, but no more than a few G. I would like to then
> install from the iso partitio
On 07/05/13 11:11 PM, Dan Hitt wrote:
The question has recently come up about how to install debian from an
iso file but not burn a disc.
So far, there have been a couple of suggestions to burn to a usb stick.
Just for reference, this is certainly possible (and on ubuntu, you can
make a bootabl
The question has recently come up about how to install debian from an
iso file but not burn a disc.
So far, there have been a couple of suggestions to burn to a usb stick.
Just for reference, this is certainly possible (and on ubuntu, you can
make a bootable usb stick quite easily, all gui, and t
Hi
I have some Dell Optiplex (500 Mhz) boxes without
- CD-ROM
- ability to boot from USB (no such option in BIOS).
The idea is to boot the box from floppies and use an USB
stick with Debian .iso image.
When booting from floppies (DISTRIB_RELEASE=3.1, installer
build 20060304)- from logs:
-
On Thu, 18 Mar 2004 06:27, Pigeon wrote:
> On Wed, Mar 17, 2004 at 02:11:59PM +1100, bob parker wrote:
> > On Wed, 17 Mar 2004 07:44, Pigeon wrote:
> > > If you've got them mounted all the time, you can stick deb file:
> > > statements in /etc/apt/sources.list pointed at the mounted images.
> > > (
On Thu, 18 Mar 2004 08:00, David wrote:
>
> Rather than treat them as ISO images, if you're going to have the images
> permanently stored on the HD, why not just copy the contents of the
> CDROMS into directories on an ext{2,3}, reiserfs - or whatever your
> poison - filesystem and then in your s
On Wed, Mar 17, 2004 at 02:11:59PM +1100, bob parker wrote:
> On Wed, 17 Mar 2004 07:44, Pigeon wrote:
> > On Wed, Mar 17, 2004 at 06:00:41AM +1100, bob parker wrote:
> > > When I use apt-get install whatever it comes back and asks for cdrom #x
> > > to be inserted. What I want to know is there so
On Wed, Mar 17, 2004 at 02:11:59PM +1100, bob parker wrote:
> On Wed, 17 Mar 2004 07:44, Pigeon wrote:
> > If you've got them mounted all the time, you can stick deb file:
> > statements in /etc/apt/sources.list pointed at the mounted images.
> > (Can't remember the syntax off the top of my head bu
On Wed, 17 Mar 2004 21:12, Brian Brazil wrote:
>
> Comment out(#) the cdrom lines. Then alter the paths for deb file until
> 'apt-get update' works correctly. Brute force but it worked for me.
>
> Brian
What I was doing wrong was failing to apt-get update after the mods to
/etc/apt/sources.list.
bob parker wrote:
Because I supply various Linuxes to members of my lug, I have quite a few iso
images on hand including the 7 for Woody r2, and soon I will have the 13 for
Sarge plus the dvd iso images.
When I use apt-get install whatever it comes back and asks for cdrom #x to be
inserted. Wha
On Wed, Mar 17, 2004 at 01:58:08PM +1100, bob parker wrote:
> apt-get does not barf but it just ignores the /mnt lines and demands a cd.
>
> Here's /etc/sources.list
> deb file:/mnt/Debian3.0/CD1/ pool woody unstable main contrib non-US/contrib
> non-US/main non-free
> deb file:/mnt/Debian3.0/CD2
On Tue, Mar 16, 2004 at 02:51:56PM -0500, Johann Koenig wrote:
> On Tuesday March 16 at 07:38pm
> Brian Brazil <[EMAIL PROTECTED]> wrote:
>
> > In fact I then export this to all my other systems with samba. BTW:
> > you can't loopback from NTFS.
>
> Do you mean NFS? If so, have you looked at the
bob parker <[EMAIL PROTECTED]> writes:
> When I use apt-get install whatever it comes back and asks for cdrom
> #x to be inserted. What I want to know is there some way I can
> divert this requirement to the corresponding iso image mounted on
> /mnt via the loopback device?
Should be able to. I
On Wed, 17 Mar 2004 07:44, Pigeon wrote:
> On Wed, Mar 17, 2004 at 06:00:41AM +1100, bob parker wrote:
> > Because I supply various Linuxes to members of my lug, I have quite a few
> > iso images on hand including the 7 for Woody r2, and soon I will have the
> > 13 for Sarge plus the dvd iso images
On Wed, 17 Mar 2004 06:38, Brian Brazil wrote:
> On Wed, Mar 17, 2004 at 06:00:41AM +1100, bob parker wrote:
> > Because I supply various Linuxes to members of my lug, I have quite a few
> > iso images on hand including the 7 for Woody r2, and soon I will have the
> > 13 for Sarge plus the dvd iso
On Wed, Mar 17, 2004 at 06:00:41AM +1100, bob parker wrote:
> Because I supply various Linuxes to members of my lug, I have quite a few iso
> images on hand including the 7 for Woody r2, and soon I will have the 13 for
> Sarge plus the dvd iso images.
>
> When I use apt-get install whatever it c
On Tuesday March 16 at 07:38pm
Brian Brazil <[EMAIL PROTECTED]> wrote:
> In fact I then export this to all my other systems with samba. BTW:
> you can't loopback from NTFS.
Do you mean NFS? If so, have you looked at the option for /etc/exports
'nohide'? man exports
--
-johann koenig
Now Playing:
On Wed, Mar 17, 2004 at 06:00:41AM +1100, bob parker wrote:
> Because I supply various Linuxes to members of my lug, I have quite a few iso
> images on hand including the 7 for Woody r2, and soon I will have the 13 for
> Sarge plus the dvd iso images.
>
> When I use apt-get install whatever it c
Because I supply various Linuxes to members of my lug, I have quite a few iso
images on hand including the 7 for Woody r2, and soon I will have the 13 for
Sarge plus the dvd iso images.
When I use apt-get install whatever it comes back and asks for cdrom #x to be
inserted. What I want to know i
On Sun, Jun 30, 2002 at 04:03:50PM +0200, Robert Ian Smit wrote:
> On Sat, Jun 29, 2002 at 06:55:00PM +0300, Sergey A. Ovchar wrote:
>
> > How to mount iso images I know. At current time I'm use RH7.3 ,which
> > was installed from iso images. But I don't understand, how can I
> > make the bootabl
On Sat, Jun 29, 2002 at 06:55:00PM +0300, Sergey A. Ovchar wrote:
> How to mount iso images I know. At current time I'm use RH7.3 ,which was
> installed from iso images. But I don't understand, how can I make the
> bootable floppy (in case with debian) and wat can I do further ;-(
I installed
CS> You can mount an ISO image on a Linux System with
CS> mount -t iso9660 -o ro,loop=/dev/loop0 your.iso /cdrom
CS> but of course that implies that you already have some Linux box where
CS> you can
CS> mount the ISO and you have somehow access from your new box to that
CS> Linux
CS> machine.
You can mount an ISO image on a Linux System with
mount -t iso9660 -o ro,loop=/dev/loop0 your.iso /cdrom
but of course that implies that you already have some Linux box where you can
mount the ISO and you have somehow access from your new box to that Linux
machine.
Maybe that helps
C
Hello ;-)
Can I install woody from iso-images. I haven't possibility to burn it on cd's.
And if I can, how can I do that?
Thanks;-)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
30 matches
Mail list logo
