On 07.01.19 23:06, Rainer Dorsch wrote:
> "Configure the IPv6 router so that it requests its own prefix from the
> FRITZ!Box
> using IPv6 prefix delegation and that it announces its routing information to
> the FRITZ!Box via router advertisement."
>
> https://en.avm.de/service/fritzbox/fritzbo
Hi Ulf,
many thank again for your reply.
Am Sonntag, 6. Januar 2019, 21:40:21 CET schrieb Ulf Volmer:
> Yes, looks weird. I have no idea why this happens.
>
> Just one point, the response times of hop 3 in your second traceroute
> are quite low (instead of hop 2 in the first one). Are you sure t
On 06.01.19 21:29, Rainer Dorsch wrote:
> rd@home:~$ traceroute6 2a03:4000:6:52b6::
> traceroute to 2a03:4000:6:52b6:: (2a03:4000:6:52b6::), 30 hops max, 80 byte
> packets
> 1 fritz.box (2a02:8070:898f:e400:e228:6dff:fe43:5776) 0.723 ms 0.608 ms
> 0.710 ms
> 2 2a02:8070:8900::1 (2a02:8070
>
> Things are getting weirder now... :-/
Just looking at the differences between the traceroutes from home (stretch
router) and mohot (endpoint):
rd@home:~$ traceroute6 2a03:4000:6:52b6::
traceroute to 2a03:4000:6:52b6:: (2a03:4000:6:52b6::), 30 hops max, 80 byte
packets
1 fritz.box (2a02:8
Hi Pascal, Ulf, and Georgi,
many thanks for your replies, they brought me at least one step further :-)
Am Sonntag, 6. Januar 2019, 20:54:43 CET schrieb Ulf Volmer:
> On 06.01.19 20:47, Rainer Dorsch wrote:
> > does not do automatic stuff. But after a reboot I still get
> >
> > root@mohot:~# ip
On 06.01.19 20:47, Rainer Dorsch wrote:
> does not do automatic stuff. But after a reboot I still get
>
> root@mohot:~# ip -6 a show eth0
> 2: eth0: mtu 1500 state UP qlen 1000
> inet6 2a02:8070:898f:e400:d263:b4ff:fe00:4dd1/64 scope global dynamic
> mngtmpaddr
>valid_lft 7126sec p
On 06.01.19 20:33, Pascal Hambourg wrote:
> Le 06/01/2019 à 20:23, Rainer Dorsch a écrit :
>> Isn't the /64 the prefix length and longer prefixes than 64 are not
>> supported in
>> ipv6?
>
> IPv6 supports any prefix size. Only SLAAC (autoconfiguration using RA's)
> requires /64.
Usually he will g
Am Sonntag, 6. Januar 2019, 20:29:27 CET schrieb Pascal Hambourg:
> You should start with a fully static setup on the host, fix routing, and
> when done you can try to setup SLAAC/DHCPv6.
I agree.
I thought that
iface eth0 inet6 manual
does not do automatic stuff. But after a reboot I still get
Le 06/01/2019 à 20:23, Rainer Dorsch a écrit :
Am Sonntag, 6. Januar 2019, 19:49:13 CET schrieb Pascal Hambourg:
BTW, I am a bit surprised by the upstream setup. It wastes a full /64
just for one address.
Do yo mean the 2a02:8070:898f:e400:d263:b4ff:fe00:325c/64 in
Yes.
Isn't the /64 the
On 1/6/19 9:23 PM, Rainer Dorsch wrot> Isn't the /64 the prefix length
and longer prefixes than 64 are not supported in
> ipv6?
>
For IPv6 there are two methods for IP address distribution - Router
Advertisement and DHCPv6.
Router Advertisement doesn't support prefixes longer than /64.
On the o
Le 06/01/2019 à 19:59, Rainer Dorsch a écrit :
Am Sonntag, 6. Januar 2019, 19:32:46 CET schrieb Ulf Volmer:
I'm confused that you have uplink and downlink addresses configured on
the client. Anyway, can you also post 'ip -6 r' from the client?
I have not explicitly configured the addresses, b
Am Sonntag, 6. Januar 2019, 19:49:13 CET schrieb Pascal Hambourg:
> Le 06/01/2019 à 19:32, Ulf Volmer a écrit :
> > On 06.01.19 18:36, Rainer Dorsch wrote:
> >> inet6 2a02:8070:898f:e400:d263:b4ff:fe00:4dd1/64 scope global dynamic
> >> mngtmpaddr>>
> >>valid_lft 7030sec preferr
Hi Pascal,
Am Sonntag, 6. Januar 2019, 19:41:51 CET schrieb Pascal Hambourg:
> Le 06/01/2019 à 18:36, Rainer Dorsch a écrit :
> > ISP router -> Stretch router (home) -> Endpoint (mohot)
> >
> > I can ssh from the mohot to home (ssh
> > 2a02:8070:898f:e4f8:d263:b4ff:fe00:325c) and I can ssh from t
Hi Ulf,
Am Sonntag, 6. Januar 2019, 19:32:46 CET schrieb Ulf Volmer:
> On 06.01.19 18:36, Rainer Dorsch wrote:
> > Endpoint:
> > -
> > rd@mohot:~$ ip addr show dev eth0
> > 2: eth0: mtu 1500 qdisc pfifo_fast state
> > UP group default qlen 1000
> >
> >link/ether d0:63:b4:00:4d:d1 brd
Le 06/01/2019 à 19:32, Ulf Volmer a écrit :
On 06.01.19 18:36, Rainer Dorsch wrote:
inet6 2a02:8070:898f:e400:d263:b4ff:fe00:4dd1/64 scope global dynamic
mngtmpaddr
valid_lft 7030sec preferred_lft 3430sec
inet6 2a02:8070:898f:e4f8:d263:b4ff:fe00:4dd1/64 scope global dynamic
mngt
Le 06/01/2019 à 18:36, Rainer Dorsch a écrit :
ISP router -> Stretch router (home) -> Endpoint (mohot)
I can ssh from the mohot to home (ssh 2a02:8070:898f:e4f8:d263:b4ff:fe00:325c)
and I can ssh from the home to the internet (using IPv6), but I cannot ssh
from the mohot (endpoint) to the inter
On 06.01.19 18:36, Rainer Dorsch wrote:
> Endpoint:
> -
> rd@mohot:~$ ip addr show dev eth0
> 2: eth0: mtu 1500 qdisc pfifo_fast state UP
> group default qlen 1000
>link/ether d0:63:b4:00:4d:d1 brd ff:ff:ff:ff:ff:ff
>inet 192.168.7.31/24 brd 192.168.7.255 scope global eth0
>
Hello,
I tried to configure a stretch based IPv6 router.
My setup is:
ISP router -> Stretch router (home) -> Endpoint (mohot)
I can ssh from the mohot to home (ssh 2a02:8070:898f:e4f8:d263:b4ff:fe00:325c)
and I can ssh from the home to the internet (using IPv6), but I cannot ssh
from the moho
18 matches
Mail list logo
