Jack Schneider wrote:
> It booted to the correct grub menu then to Busy Box. I am thinking it
> goes to BB because it can't find /var and or /usr on the md1/sda5 LVM
> partition.
Very likely.
> I checked /proc/mdstat and lo & behold there was md1:active
> with correct partitions and md0: active a
On Mon, 17 Jan 2011 20:43:16 -0700
Bob Proulx wrote:
> Jack Schneider wrote:
> > Bob Proulx wrote:
> > > mdadm --stop /dev/md125
> > > mdadm --assemble /dev/md0
> > > --update=super-minor /dev/sda1 /dev/sdc1
> > >
> > > mdadm --stop /dev/126
> > > mdadm --assemble /dev/md1
> > > --update=
Jack Schneider wrote:
> Bob Proulx wrote:
> > mdadm --stop /dev/md125
> > mdadm --assemble /dev/md0 --update=super-minor /dev/sda1 /dev/sdc1
> >
> > mdadm --stop /dev/126
> > mdadm --assemble /dev/md1 --update=super-minor /dev/sda5 /dev/sdc5
>
> Bob, a small glitch. mdadm:/dev/sda1 exists
On Mon, 17 Jan 2011 15:50:12 -0600
Jack Schneider wrote:
> On Mon, 17 Jan 2011 12:48:29 -0700
> Bob Proulx wrote:
>
> > Jack Schneider wrote:
> > > Bob Proulx wrote:
> > > > But, and this is an important but, did you previously add the
> > > > new disk array to the LVM volume group on the above
On Mon, 17 Jan 2011 12:48:29 -0700
Bob Proulx wrote:
> Jack Schneider wrote:
> > Bob Proulx wrote:
> > > But, and this is an important but, did you previously add the new
> > > disk array to the LVM volume group on the above array? If so
> > > then you are not done yet. The LVM volume group won
Jack Schneider wrote:
> Bob Proulx wrote:
> > Note that if you add new disk to the lvm root volume group then you
> > also need to rebuild the initrd or your system won't be able to
> > assemble the array at boot time and will fail to boot. (Saying that
> > mostly for people who find this in the a
On Mon, 17 Jan 2011 12:48:29 -0700
Bob Proulx wrote:
> Jack Schneider wrote:
> > Bob Proulx wrote:> will be well..
>
> I have my fingers crossed for you that it will all be okay.
>
> > I have not done the things you have suggested above. I'll wait for
> > your response and then go!!!
>
> Plea
Jack Schneider wrote:
> Bob Proulx wrote:
> > But, and this is an important but, did you previously add the new disk
> > array to the LVM volume group on the above array? If so then you are
> > not done yet. The LVM volume group won't be able to assemble without
> > the new disk. If you did then
On Sun, 16 Jan 2011 18:42:49 -0700
Bob Proulx wrote:
> Jack,
>
> With your pastebin information and the mdstat information (that last
> information in your mail and pastebins was critical good stuff) and
> I found this old posting from you too: :-)
>
> http://lists.debian.org/debian-user/200
Jack,
With your pastebin information and the mdstat information (that last
information in your mail and pastebins was critical good stuff) and
I found this old posting from you too: :-)
http://lists.debian.org/debian-user/2009/10/msg00808.html
With all of that I deduce the following:
/dev/
On Sat, 15 Jan 2011 16:57:46 -0700
Bob Proulx wrote:
> Jack Schneider wrote:
> > Bob Proulx wrote:
> > > Jack Schneider wrote:
> > > > I have a raid1 based W/S running Debian Squeeze uptodate. (was
> > > > until ~7 days ago) There are 4 drives, 2 of which had never been
> > > > used or formatted.
11 matches
Mail list logo