Dr. Jennifer Nussbaum, 15.05.2011:
> --- On Sun, 5/15/11, Andrei Popescu wrote:
>
> > Jennifer Nussbaum wrote:
> > >
> > > and Im using the rt2800pci driver. The machine itself
> > is running 2.6.38-2-amd64
> > > #1.
> >
> > You could try 2.6.39-rc7-amd64 from experimental.
>
> OK, i did giv
--- On Sun, 5/15/11, Andrei Popescu wrote:
> Jennifer Nussbaum wrote:
> >
> > and Im using the rt2800pci driver. The machine itself
> is running 2.6.38-2-amd64
> > #1.
>
> You could try 2.6.39-rc7-amd64 from experimental.
OK, i did give this a try (though i worry about doing stuff like this;
On Sun 15 May 2011 at 14:06:54 +, Camaleón wrote:
> On Sun, 15 May 2011 04:11:50 -0700, Dr. Jennifer Nussbaum wrote:
>
> > Hm--I see a whole bunch of stuff. Which are the wrong ones, and how do i
> > blacklist them?
>
> Good question :-)
>
> The working one has to be "rt2800pci" but I'm not
On Sun, May 15, 2011 at 03:24:16AM -0700, Dr. Jennifer Nussbaum wrote:
> Hi. Yesterday i sent a message about having trouble with finding the driver
> for
> my ralink card. I got help with that but now
> its "working" but not in any good way.
>
> The card is:
>
> 05:00.0 Network controller [028
On Du, 15 mai 11, 03:24:16, Dr. Jennifer Nussbaum wrote:
>
> and Im using the rt2800pci driver. The machine itself is running
> 2.6.38-2-amd64
> #1.
You could try 2.6.39-rc7-amd64 from experimental.
Regards,
Andrei
--
Offtopic discussions among Debian users and developers:
http://lists.aliot
> again.
>
> This brought me back t othe same place as before, with the same long
> list of things from lsmod. And the problems were the same, i.e. no sign
> of the 802.11n network, and uselessly slow connection speed on the
> 802.11g.
Then forget about the "driver conflict&q
> modprobe -r rt2x00pci
> modprobe -r rt2800pci
I had to do this in the reverse order, but then it worked. "lsmod | grep rt2"
came up blank.
> And then load just the one it works:
>
> modprobe rt2800pci
>
> Then check again the listed modules:
>
> lsmod
On Sun, 15 May 2011 04:11:50 -0700, Dr. Jennifer Nussbaum wrote:
> --- On Sun, 5/15/11, Camaleón wrote:
>> > Hi. Yesterday i sent a message about having trouble
>> with finding the
>> > driver for my ralink card. I got help with that but
>> now its "working"
>> > but not in any good way.
>>
>>
--- On Sun, 5/15/11, Camaleón wrote:
> From: Camaleón
> Subject: Re: Ralink driver connection, speed problems
> To: debian-user@lists.debian.org
> Date: Sunday, May 15, 2011, 4:03 AM
> On Sun, 15 May 2011 03:24:16 -0700,
> Dr. Jennifer Nussbaum wrote:
>
> > Hi.
On Sun, 15 May 2011 03:24:16 -0700, Dr. Jennifer Nussbaum wrote:
> Hi. Yesterday i sent a message about having trouble with finding the
> driver for my ralink card. I got help with that but now its "working"
> but not in any good way.
(...)
I would first check for a possible driver conflict:
ls
Hi. Yesterday i sent a message about having trouble with finding the driver for
my ralink card. I got help with that but now
its "working" but not in any good way.
The card is:
05:00.0 Network controller [0280]: Ralink corp. RT3092 Wireless 802.11n 2T/2R
PCIe [1814:3092]
and Im using the rt280
Ron Johnson put forth on 4/17/2011 10:16 PM:
>
> "Speedtest.net requires at least version 9 of Flash. Please update your
> client."
I've been greedily keeping these b/w testing sites to myself for many
many years, but I'm in a sharing mood. Use the server nearest you.
http://ndt-202.net.berkele
"Speedtest.net requires at least version 9 of Flash. Please update your
client."
On 04/17/2011 01:37 PM, Jude DaShiell wrote:
You can do apt-get lynx -r as root then try: lynx
http://www.speedtest.net/. The statistics you need should then
appear on the screen for you to examine.On Sun, 17 Apr
You can do apt-get lynx -r as root then try: lynx
http://www.speedtest.net/ . The statistics you need should then
appear on the screen for you to examine.On Sun, 17 Apr 2011, Wayne Topa
wrote:
> On 04/17/2011 01:29 AM, sahaya wrote:
> >
> >
> >
> > Nathan Zabaldo wrote:
> > >
> > > Is there a
On Apr 17, 2011, at 11:48 AM, Wayne Topa wrote:
> Install the iftop package
Wow! That is profoundly cool. I didn't know it existed. Thanks -- I just hope
Nathan likes it too :-)
--
Glenn English
“Get a bicycle. You will not regret it. If you live.” - Mark Twain
--
To UNSUBSCRIBE, email to d
On 04/17/2011 01:29 AM, sahaya wrote:
Nathan Zabaldo wrote:
Is there a package or a way to test upstream and downstream speeds of an
Internet connection from a terminal in Debian Woody?
e.g. www.speakeasy.net/speedtest/ , but I need to test from a terminal as
I
do not have a browser.
In
.
>
>
>
> check this out.. i got my speed test result through this site.
> http://www.ip-details.com/ its easy and faster.
>
>
>
>
>
>
>
>
--
View this message in context:
http://old.nabble.com/Internet-Connection-Speed-Test-tp1804987p31416213
Alvin Oga wrote:
On Mon, 5 Dec 2005, Mike McCarty wrote:
Alvin Oga wrote:
On Mon, 5 Dec 2005, Mike McCarty wrote:
e.g. www.speakeasy.net/speedtest/ , but I need to test from a terminal as I
Watch your attributions! I DID NOT WRITE THAT!
never said you did ... "watch for > >>>" etc
On Mon, 5 Dec 2005, Mike McCarty wrote:
> Alvin Oga wrote:
> > On Mon, 5 Dec 2005, Mike McCarty wrote:
> >
> >
> >>>e.g. www.speakeasy.net/speedtest/ , but I need to test from a terminal as I
>
> Watch your attributions! I DID NOT WRITE THAT!
never said you did ... "watch for > >>>" etc..
Alvin Oga wrote:
On Mon, 5 Dec 2005, Mike McCarty wrote:
e.g. www.speakeasy.net/speedtest/ , but I need to test from a terminal as I
Watch your attributions! I DID NOT WRITE THAT!
Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled
On Mon, 5 Dec 2005, Mike McCarty wrote:
> > e.g. www.speakeasy.net/speedtest/ , but I need to test from a terminal as I
download the kernel files from kernel.org
wget http://www.kernel.org/your-favorite-kernel.bz2
or use scp
both tellls you how fast you are .. if you know the size of the
fil
Nathan Zabaldo wrote:
Is there a package or a way to test upstream and downstream speeds of an
Internet connection from a terminal in Debian Woody?
e.g. www.speakeasy.net/speedtest/ , but I need to test from a terminal as I
do not have a browser.
I went to that site, and I don't see how it
Is there a package or a way to test upstream and downstream
speeds of an Internet connection from a terminal in Debian Woody?
e.g. www.speakeasy.net/speedtest/
, but I need to test from a terminal as I do not have a browser.
Nate,
[EMAIL PROTECTED] wrote on Dec, 5:
> Is there a package or a way to test upstream and downstream speeds of an
> Internet connection from a terminal in Debian Woody?
Try iftop. It doesn't upload/download anything: you'd have to start that
apart. It continuously shows, top-like, the upstre
Is there a package or a way to test upstream and downstream
speeds of an Internet connection from a terminal in Debian Woody?
e.g. www.speakeasy.net/speedtest/
, but I need to test from a terminal as I do not have a browser.
On 7/23/05, Mr Mike <[EMAIL PROTECTED]> wrote:
> On Wed, 20 Jul 2005 18:44:16 -0400, hacker (of golf) wrote:
>
> > I'm trying to create a popup to show the connection speed.
> >
> > I'm trying this:
> >
> > root :~# kdialog --display localhost
On Wed, 20 Jul 2005 18:44:16 -0400, hacker (of golf) wrote:
> I'm trying to create a popup to show the connection speed.
>
> I'm trying this:
>
> root :~# kdialog --display localhost:0 --msgbox "Connection Speed
> `tail -n1 /var/log/ppp-connect-errors | a
;
> to the end of /etc/ppp/ip-up and now I get a popup telling me the
> connection speed.
>
> > --
> > Matías Rollán
> > <[EMAIL PROTECTED]>
Actually, after rebooting, this no longer works. Is the 'xhost +'
command supposed to survive a reboot? How would I make it permanent?
regards,
On 7/20/05, Matias Rollan <[EMAIL PROTECTED]> wrote:
> Hola !
>
> On Wed, Jul 20, 2005 at 06:44:16PM -0400, hacker (of golf) wrote:
> > I'm trying to create a popup to show the connection speed.
> >
> > I'm trying this:
> >
> > root :~# k
hacker (of golf) wrote:
> I'm trying to create a popup to show the connection speed.
> I'm trying this:
>
> root :~# kdialog --display localhost:0 --msgbox "Connection Speed
> `tail -n1 /var/log/ppp-connect-errors | awk '{ print $6 }'` bps"
>
Hola !
On Wed, Jul 20, 2005 at 06:44:16PM -0400, hacker (of golf) wrote:
> I'm trying to create a popup to show the connection speed.
>
> I'm trying this:
>
> root :~# kdialog --display localhost:0 --msgbox "Connection Speed
> `tail -n1 /var/log/ppp-connect
I'm trying to create a popup to show the connection speed.
I'm trying this:
root :~# kdialog --display localhost:0 --msgbox "Connection Speed
`tail -n1 /var/log/ppp-connect-errors | awk '{ print $6 }'` bps"
kdialog: cannot connect to X server localhost:0
but, as yo
On Sat, Jul 03, 2004 at 01:04:35AM +0300, Lior Kaplan wrote:
> Hi,
>
> How can I know my modem's connection speed?
> I checked the /var/log/syslog and found some hex number from the
> /usr/bin/chat output. I'm guessing that's related (since it should be
> the h
Hi,
How can I know my modem's connection speed?
I checked the /var/log/syslog and found some hex number from the
/usr/bin/chat output. I'm guessing that's related (since it should be
the handshake between the modems). But I'm not sure if that's true or
how can I figur
Hello.
I'm using pppconfig and pon/poff to connect to internet using dialup. Is
there an easy way to view current connection speed??? Thanks.
==
Plese, don't send me any attachment in Micro$oft (.DOC, .PPT) format.
external modem to connect at
the highest attainable data rate (AT&N0) whilst at the same time enabling
auto data compression (AT&K1). /var/log/syslog has in it several lines
pertaining to the activity of pppd but cannot deduce the connection speed.
Thanks anyway.
--
Alphonse Ogulla
N
On Tue, Aug 19, 2003 at 02:54:24PM +0300, Alphonse Ogulla wrote:
> Just configured ppp and established a connection using pon. ifconfig ppp0
> shows device ppp0 is up and running but with no indication of the negotiated
> bandwidth. How can I establish the speed in Kbps at which I'm connected?
>
Just configured ppp and established a connection using pon. ifconfig ppp0
shows device ppp0 is up and running but with no indication of the negotiated
bandwidth. How can I establish the speed in Kbps at which I'm connected?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to [EMAIL
Thanks a lot for the tips, I'll check it out!
On Tue, 25 Sep 2001, Karsten M. Self wrote:
> on Tue, Sep 25, 2001 at 11:27:01AM -0500, Alexander Wallace ([EMAIL
> PROTECTED]) wrote:
>
> > My questions: Will I be in the safe side if I decide to use debian for
> > an internet server to serve web/ma
on Tue, Sep 25, 2001 at 11:27:01AM -0500, Alexander Wallace ([EMAIL PROTECTED])
wrote:
> My questions: Will I be in the safe side if I decide to use debian for
> an internet server to serve web/mail/servlets/php/mysql and stuff like
> that as far as performance and security goes? compared to a re
:
> On Fri, Feb 16, 2001 at 03:12:49PM -0500, Richard Black wrote:
>
> > can anyone recommend a tool that will estimate network/connection
> > speed? In particular I want to estimate my upload/download times over
> > my cable DSL...
>
> $apt-get install bing
>
On Fri, Feb 16, 2001 at 03:12:49PM -0500, Richard Black wrote:
> can anyone recommend a tool that will estimate network/connection
> speed? In particular I want to estimate my upload/download times over
> my cable DSL...
$apt-get install bing
Phil
t: Tool to measure network/connection speed
> Hi all,
>
> can anyone recommend a tool that will estimate network/connection
> speed? In particular I want to estimate my upload/download times
over
> my cable DSL...
>
> thanks
>
> Richard
>
__
Hi all,
can anyone recommend a tool that will estimate network/connection
speed? In particular I want to estimate my upload/download times over
my cable DSL...
thanks
Richard
begin:vcard
n:Black;Richard
tel;fax:416-971-4159
tel;home:
tel;work:416-217-4350
x-mozilla-html:TRUE
> > After pon does its thing, is there a way to see how fast my connection is?
>
> One way to find out is to find the AT commands (modem manual) that
> force the modem to tell the right speed, not the speed between modem
> and computer. Then you should see that in the logfile. But this can be
> dy
On Thu, 7 Dec 2000 11:35:44 -0600 (Central Standard Time)
"David A. Rogers" <[EMAIL PROTECTED]> wrote:
> After pon does its thing, is there a way to see how fast my connection is?
One way to find out is to find the AT commands (modem manual) that
force the modem to tell the right speed, not the s
After pon does its thing, is there a way to see how fast my connection is?
dar
On Thu, Aug 03, 2000 at 10:48:32AM +0200, Philippe MICHEL wrote:
> Hello,
>
> I am using Debian slink, and a standard modem/pppd connection to my
> provider.
>
> Everything works well since years (I used the same config with Slakware)
>
> But how/where can I see with which speed the modem has b
hich speed the modem has been connected ??
>
> thanks,
>
> --
> - Philippe MICHEL
I use the following /etc/chatscripts/provider file:
ABORT BUSY
ABORT "NO CARRIER"
ABORT VOICE
ABORT "NO DIALTONE"
ABORT "NO ANSWER"
"" ATZ
OK ATX4
OK ATW1
OK
On 3 Aug 2000, John Hasler wrote:
> Karsten M. Self writes:
> > The raw information is available under /proc/net,...
>
> That is just the speed of the connection from the computer to the modem.
> It is generally much higher then the modem bit rate (not baud rate.
higher rate useful for on the
kmself@ix.netcom.com (kmself@ix.netcom.com) wrote:
> On Thu, Aug 03, 2000 at 01:55:51PM +0200, Philippe MICHEL wrote:
> >
> >
> > kmself@ix.netcom.com wrote:
> > >
> > > On Thu, Aug 03, 2000 at 10:48:32AM +0200, Philippe MICHEL wrote:
> > > > Hello,
> > > >
> > > > I am using Debian slink, and
Karsten M. Self writes:
> The raw information is available under /proc/net,...
That is just the speed of the connection from the computer to the modem.
It is generally much higher then the modem bit rate (not baud rate.
There is an AT command to tell your modem to report the bit rate and a chat
o
On Thu, Aug 03, 2000 at 01:55:51PM +0200, Philippe MICHEL wrote:
>
>
> kmself@ix.netcom.com wrote:
> >
> > On Thu, Aug 03, 2000 at 10:48:32AM +0200, Philippe MICHEL wrote:
> > > Hello,
> > >
> > > I am using Debian slink, and a standard modem/pppd connection to my
> > > provider.
> > >
> > > Eve
kmself@ix.netcom.com wrote:
>
> On Thu, Aug 03, 2000 at 10:48:32AM +0200, Philippe MICHEL wrote:
> > Hello,
> >
> > I am using Debian slink, and a standard modem/pppd connection to my
> > provider.
> >
> > Everything works well since years (I used the same config with Slakware)
> >
> > But how/w
On Thu, Aug 03, 2000 at 10:48:32AM +0200, Philippe MICHEL wrote:
> Hello,
>
> I am using Debian slink, and a standard modem/pppd connection to my
> provider.
>
> Everything works well since years (I used the same config with Slakware)
>
> But how/where can I see with which speed the modem has b
Hello,
I am using Debian slink, and a standard modem/pppd connection to my
provider.
Everything works well since years (I used the same config with Slakware)
But how/where can I see with which speed the modem has been connected ??
thanks,
--
- Philippe MICHEL
- [EMAIL PROTECTED]
- [EMAIL PRO
wow, I just haven't told u about the peer error because it just occured
when I tryed to connect to my isp using the kppp programm. and that's
nothing to do with the connection speed... and I just can't connect with
it even now because I dunno nothing about peers... I think be
[snip]
> peer refused to autheticate
[snip]
Jeeze! Why didn't you say so? Basically, your ISP wants you to
authenticate using CHAP, instead of PAP, or vice-versa. I've never used
CHAP, myself, so I can't help you there, but I have seen this discussed
before.
Try coping your /etc/ppp/chap-secre
wow, sorry, it was really vj-max-slots 16, I just have typed it wrongly
in my email... I also connected with pon/poff but it stayed just the
same. with kppp, it connects and autheticates, but before receiving an
ip address from my provider, it gets offline and the following msg is
posted in the fil
> well, here on my slink system I have added to the provider file these
> lines:
> bsdcomp 15,15
> deflate 15,15
> vj=max-slots 16
> mru 576
> mtyu 576
vj=max-slots 16? make sure that's not an = sign, but a - (I assume it's a
typo)
>
> notice, my modem is a 28800 modem, so the mru and mtu line
"Dwayne C . Litzenberger" wrote:
> > DCL> bsdcomp 15,15 deflate 15,15 vj-max-slots 16
well, here on my slink system I have added to the provider file these
lines:
bsdcomp 15,15
deflate 15,15
vj=max-slots 16
mru 576
mtyu 576
notice, my modem is a 28800 modem, so the mru and mtu lines shuold
> >mru 576
> >mtu 576
How much extra overhead does that have on large downloads (eg. all of
SuSE)? I'd like to set it for the easily intertwined packets (eg for
games), but is it worth it for my download speed?
--
"I already have all the latest software."
-- Laura Winslow, "Family
Salman Ahmed wrote:
>
> > "DCL" == Dwayne C Litzenberger <[EMAIL PROTECTED]> writes:
>
> DCL> Edit /etc/ppp/peers/provider and make sure your baud rate is set
> DCL> to 115200 or 57600. You might also want to add the lines:
>
> DCL> bsdcomp 15,15 deflate 15,15 vj-max-slots 16
Basically, they set compression to the max (man pppd).
On Wed, Oct 13, 1999 at 08:40:15PM -0400, Salman Ahmed wrote:
> > "DCL" == Dwayne C Litzenberger <[EMAIL PROTECTED]> writes:
>
> DCL> Edit /etc/ppp/peers/provider and make sure your baud rate is set
> DCL> to 115200 or 57600. You
Edit /etc/ppp/peers/provider and make sure your baud rate is set to 115200
or 57600. You might also want to add the lines:
bsdcomp 15,15
deflate 15,15
vj-max-slots 16
To juice up compression.
Hope this helps.
On Wed, Oct 13, 1999 at 12:38:27PM -0200, [EMAIL PROTECTED] wrote:
> hy there,
hy there,
I've just installed debian slink and I'd like to upgrade it
to potato, but my internet connection is very slow. I have a usr
sportster 28800, and on my redhat 6.0 (on the same machine...) I can
do downloads from ftp.debian.org at least at 3.0 K/s, and on slink,
only 956 B/s, if
I believe the Modem-HOWTO deals with this as well.
> At 12:41 08.09.99 +0200, Enrico Zini wrote:
> >Hello!
> >
> >I would like to see the modem connection speed after the CONNECT message
> in my
> >logs; I use ppp 2.3.5-2 on a slink box.
>
> Depends which m
-BEGIN PGP SIGNED MESSAGE-
On Thu, 9 Sep 1999, Enrico Zini wrote:
> Opening "/var/log/connection_speeds"...
> chat: Sep 09 16:23:04 CONNECT 50666/ARQ/V90/LAPM/V42BIS
> Closing "/var/log/connection_speeds".
> Opening "/var/log/connection_speeds"...
> chat: Sep 09 10:55:38 CONNECT 50666/A
*- On 9 Sep, Enrico Zini wrote about "Re: Modem connection speed"
>
> (and, BTW, another thing I would like to know is why doesn't it CONNECT
> 56000 :( )
>
Here is a little article describing all the reasons. Actually you are
lucky to get 50666.
http://www.comput
On 8 Sep 1999, John Hasler wrote:
> > This is my chatscript (I added ECHO and REPORT to the original pppconfig
> > generated script, but nothing changed):
> > connect "/usr/sbin/chat -v -f /etc/chatscripts/mclink2"
>
> Change that to connect "/usr/sbin/chat -v -r report_file -f
> /etc/chatscript
Enrico Zini writes:
> This is my chatscript (I added ECHO and REPORT to the original pppconfig
> generated script, but nothing changed):
> connect "/usr/sbin/chat -v -f /etc/chatscripts/mclink2"
Change that to connect "/usr/sbin/chat -v -r report_file -f
/etc/chatscripts/mclink2"
where 'report_
On Wed, 8 Sep 1999, Hasso Tepper wrote:
> >I would like to see the modem connection speed after the CONNECT message
> in my
> >logs; I use ppp 2.3.5-2 on a slink box.
> Depends which modem do you use. Look at your modems manual to see how to
> enable
> connection speed
At 12:41 08.09.99 +0200, Enrico Zini wrote:
>Hello!
>
>I would like to see the modem connection speed after the CONNECT message
in my
>logs; I use ppp 2.3.5-2 on a slink box.
Depends which modem do you use. Look at your modems manual to see how to
enable
connection speed reporting.
Hasso
Hello!
I would like to see the modem connection speed after the CONNECT message in my
logs; I use ppp 2.3.5-2 on a slink box.
* This is my chatscript (I added ECHO and REPORT to the original pppconfig
generated script, but nothing changed):
ABORT BUSY
ABORT "NO CARRIER"
ABORT VOICE
You can try the pppload utility. I am sorry, I don't remeber where I found it.
I think it does exist as a deb package
Franck
>I finally worked out how to pon to specific providers using
> pon
>
>How do I find out what my connection speed is?
Well, for *starters*, you need to make sure that your modem is reporting the
DCE speed (the speed it's talking to the other modem at) and not the DTE
spee
Hi,
I finally worked out how to pon to specific providers using
pon
How do I find out what my connection speed is?
I had deleted /var/log/ppp.log earlier assuming that it will be recreated by
what ever program but that didn't happen. Will creating a blank file do the
trick.
Sinc
You could:
1. Use wvdial package to finetune your modem.
2. Use irqtune to do the same. I tried it, it doesnt help me much, though
my usual speed of download is around 3Kbs on netscape/ftp with 33.6 modem.
As far as FAQ for irqtune says, it sounds like you have a problem that
requires that packag
Hi all,
I tried to use the RedHat /etc/ppp/options file in debian, and it
didn't help. The connection speed cannot go up to 800 bytes/sec.
The redhat's ppp version is 2.3.3-6. And I am using the newest
stable ppp debian pachage.
So any ideas?? I really want t
>Is there anything wrong with the script? I use them in Redhat as well, and
>it didn't cause trouble at all...
>
>
Shao,
I don't think so...but one thing, unless you've altered the
/etc/ppp/options file, the default with RedHat has only the statement
"lock" in it. That means the rest of the op
Shao Ying Zhang writes:
> In debian, for ISP A, I can have a average download rate 3k/s. But for B &
> C, the download rate is only about 800bytes/s.
> But for the same matchine, in RedHat 5.1, I can have a download rate at
> 3k/s for all three ISPs.
What version of pppd are you using with Red Ha
Hi all,
I have three ISPs, let me name them A, B and C.
A is very new(technology), B & C are relatively old compare to A.
In debian, for ISP A, I can have a average download rate 3k/s. But for B &
C, the download rate is only about 800bytes/s.
But for the same matchine, in RedHat 5.1, I c
At 04:14 PM 10/30/98 -0500, Raymond A. Ingles wrote:
>On Thu, 29 Oct 1998, Kenneth Scharf wrote:
>
>> Just recently there was a posting here that said they got better
>> connection speed in Win95 than in Linux. A couple of days ago I heard
>> another Linux say the same thin
One way to do it is like this:
1) In your /etc/ppp/peers/provider file, modify your connect line to
look something like this:
connect "/usr/sbin/chat -v -r report-file -f /etc/chatscripts/provider"
where the "-r report-file" specifies the file to report the speed to.
2) In your /etc/chatscript
Hello all.
I know this topic has been discussed about a month agoI did not save
the messages.
How can I display the speed of my ppp connection?
TIA,
Andrew
Never include a comment that will help | Andrew Ivanov
someone else
saves each connection speed to a file called
/etc/ppp/speed. To do this, using a debian 2.0 system, go to your
/etc/chatscripts directory and modify the file for your provider. It
will be named, what ever you named it when you ran the pppconfig
program. In this example, mine is called cp1. Add "R
On Sat, Oct 31, 1998 at 08:23:47PM -0600, [EMAIL PROTECTED] wrote:
> Michele writes:
> > It seems that there isn't a place (manpages, howtos, readmes) where these
> > speeds are listed :(, and even worse, my posting about this problem via
> > the debian bug tracking system had no replies
>
> What
Michele Bini writes:
> Also please remember to edit your /etc/rc.boot/0setserial
> file to have spd_vhi (or spd_hi) in the STD_FLAGS:
> STD_FLAGS="session_lockout spd_vhi"
Please don't. pppd will work just fine at 115200 without this.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing
> > it just an improper init string or etc?
>
> From my (short) experience many people (including me)
> experiencing slower connection speed under Linux were giving
> pppd the wrong connection speed.
>
> pppd only accepts a limite
Michele writes:
> It seems that there isn't a place (manpages, howtos, readmes) where these
> speeds are listed :(, and even worse, my posting about this problem via
> the debian bug tracking system had no replies
What package did you file the bug against? You should at least have gotten
an autom
On Thu, Oct 29, 1998 at 05:23:31AM -0800, Kenneth Scharf wrote:
> Just recently there was a posting here that said they got better
> connection speed in Win95 than in Linux. A couple of days ago I heard
sorry, what posting do you refer to?
> another Linux say the same thing. And so
Raymond A. Ingles writes:
> I think serial ports in Linux default to pretty conservative values. Try
> setting the rate to at least 38400. I'll bet that this is the main source
> of the problem.
pppconfig sets the rate to 115200. 38400 isn't fast enough to keep up with
a modem running 28800.
> M
On Thu, 29 Oct 1998, Kenneth Scharf wrote:
> Just recently there was a posting here that said they got better
> connection speed in Win95 than in Linux. A couple of days ago I heard
> another Linux say the same thing. And so far, on a hamm box, I can only
> get 19200 out of my 28800 p
some special stuff. Maybe I should borrow a line montitor
from work and see what the two of them are talking about!
==
Just recently there was a posting here that said they got better
connection speed in Win95 than in Linux. A couple of days
On 28 Oct 1998, Manoj Srivastava wrote:
> Hi,
> >>"Michael" == Michael Beattie <[EMAIL PROTECTED]> writes:
>
> Michael> If you are using chat, pass it the '-v' option.
>
> I am passing the -v option to chat, and indeed, I am also
> using W2S95=47 (I have a rockwell chip modem). plog does
On Wed, 28 Oct 1998, Kent West wrote:
> Just recently there was a posting here that said they got better
> connection speed in Win95 than in Linux. A couple of days ago I heard
> another Linux say the same thing. And so far, on a hamm box, I can only
> get 19200 out of my 28800 pc ca
Just recently there was a posting here that said they got better
connection speed in Win95 than in Linux. A couple of days ago I heard
another Linux say the same thing. And so far, on a hamm box, I can only
get 19200 out of my 28800 pc card modem. Is this typical of Linux, or is
it just an
Hi,
>>"Michael" == Michael Beattie <[EMAIL PROTECTED]> writes:
Michael> If you are using chat, pass it the '-v' option.
I am passing the -v option to chat, and indeed, I am also
using W2S95=47 (I have a rockwell chip modem). plog does not have
that, but /var/log/ppp.log does indeed hav
Hamish Moffatt writes:
> Not really the same thing; you really need ATZ then ATW2 as a separate
> command. Or do ATW2 and write the options to NVRAM with &W.
You're right: 'ATZ OK ATW2' for belt & suspenders. But most modems don't
need the ATZ at all.
--
John Hasler
[EMAIL PROTECTED] (John Hasle
On Sun, Oct 25, 1998 at 01:33:12PM -0600, [EMAIL PROTECTED] wrote:
> wb2oyc writes:
> > I'm not sure how to tell the ppp daemon or chatscript to tell you that
>
> Replace the 'ATZ' in your chatscript with 'ATW2'. Add '-r /etc/ppp/speed'
Not really the same thing; you really need ATZ then ATW2 as
1 - 100 of 121 matches
Mail list logo
