The message:
PCI: unable to reserve mem region #1:.. for device :00:09.0
is the most likely place where the system failed. The driver could not initialize
properly, so the RAID cannot be used and your system goes to "waiting for root
filesystem".
If the message actually tells you wha
i dumped into 'busybox' but i cant find /etc/mkinitramfs...
in /etc i can only find: modprobe.d, scsi_id.config udev.
thanks. Fabrizio.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
i report the "i20" boot sequence... i think it can be helpful:
i20: checking for pci i20 controllers...
iop0: controller found (:00:09.0)
iop0: installed at irq 5
i20: iop0: activating i20 controller...
i20: iop0: this may take a few minutes if there are many devices
iop0: HRT has 1 entris of
On Fri, Aug 03, 2007 at 12:29:38PM +0200, Fabrizio Pedersoli wrote:
> 2007/8/3, Douglas Allan Tutty <[EMAIL PROTECTED]>:
> > On Thu, Aug 02, 2007 at 06:54:51PM +0200, Fabrizio Pedersoli wrote:
> > > i have a big problem with an Adaptec 2100s scsi controller, which
> &g
I remember a "waiting for root filesystem" when I was using a software RAID and my
drivers didn't load. I had to edit /etc/mkinitramfs/modules and make sure my "md" driver
was added to the initrd image.
It is possible that you need some driver to load to access your RAID? If you
wait, say,
Allan Tutty <[EMAIL PROTECTED]>:
>
> On Thu, Aug 02, 2007 at 06:54:51PM +0200, Fabrizio Pedersoli wrote:
> > i have a big problem with an Adaptec 2100s scsi controller, which
> manages 2
> > disks in RAID-0. the Debian installer found correctly that raid and the
> > ins
On Thu, Aug 02, 2007 at 06:54:51PM +0200, Fabrizio Pedersoli wrote:
> i have a big problem with an Adaptec 2100s scsi controller, which manages 2
> disks in RAID-0. the Debian installer found correctly that raid and the
> installation process terminates fine. But when i reboot, after li
Hi all guys!
i have a big problem with an Adaptec 2100s scsi controller, which manages 2
disks in RAID-0. the Debian installer found correctly that raid and the
installation process terminates fine. But when i reboot, after linux loads
i20 modules and founds hdd... it stops saying "waitin
Citat Marc Mueller <[EMAIL PROTECTED]>:
> Try using the "dpt_i2o" driver (Adaptec I2O RAID support) instead of the
> i2o_* modules.
>
> Marc
>
that's the one I'm using. sorry for the poor information, had no conection to my
server and didn't remember everything.
here is all information about m
Hi,
I recently installed a Adaptec 2100S SCSI HW Raid controler and two HD which
are mirroerd.
Kernel version is 2.4.22-ow1 and I compiled the i2o module to the kernel and I
thought that everyithing works fine, well actualz it does work perfect till I
start a tar.
After a short while the system
Citat Andrea Vettorello <[EMAIL PROTECTED]>:
> On Tue, 5 Oct 2004 13:31:17 +0200, Cristian Livadaru <[EMAIL PROTECTED]>
> wrote:
> >
> > Hi, I recently installed a Adaptec 2100S SCSI HW Raid controler and two HD
> which
> > are mirroerd.
> > Kernel
On Tue, 5 Oct 2004 13:31:17 +0200, Cristian Livadaru <[EMAIL PROTECTED]> wrote:
>
> Hi, I recently installed a Adaptec 2100S SCSI HW Raid controler and two HD which
> are mirroerd.
> Kernel version is 2.4.22-ow1 and I compiled the i2o module to the kernel and I
> thought t
Hi, I recently installed a Adaptec 2100S SCSI HW Raid controler and two HD which
are mirroerd.
Kernel version is 2.4.22-ow1 and I compiled the i2o module to the kernel and I
thought that everyithing works fine, well actualz it does work perfect till I
start a tar.
After a short while the system
Not out of the box. You'll need to create a custom boot floppy for the
install.
If I can ever find mine, I'll post an image, but I lost the darn thing
in the blizzard of paper on my desk.
Once you get it running, things work great from what I've seen.
--Rich
Hi im not on this list but im cur
Anders Johansson, 2001-Nov-07 07:26 +0100:
>
>Hi im not on this list but im currently wondering are Adaptec's 2100S
>raid controller supported ?
>
>if you know please let me know
I don't see that specific controller in potato or woody, but
there are references to several different ch
Hi im not on this list but im currently wondering are Adaptec’s 2100S raid
controller supported ?
if you know please
let me know
Sincerely Anders Johansson
– [EMAIL PROTECTED]
16 matches
Mail list logo
