n for
"self-created" menus, so i don't use the gnome menu on screen 2 :-/
Ramin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
; Can anyone give me some help on this?
>>
> Sorry to be a pest, but I have recieved no replies on this yet :-(
>
> A pointer to docs, would be grat!
>
Squirrelmail is an IMAP Client, so you need an IMAP Server. Qpopper
only supports POP3.
Sqwebmail needs maildirs, did you conf
me with messages like crazy:
> Kind regards
>
> Andreas.
If i remember correctly, logcheck calls run-parts on the ignore.d.*
dirs. From man run-parts:
If the --lsbsysinit option is not given then the names must consist
entirely of upper and lower case letters, digits, unde
ut results.
>
> Thanks
>
Did you adjust the mailbox acl (cyradm -> setaclmailbox)?
Can you create Subfolders with a different IMAP client?
I everythig fails, you can also try to set
$auto_create_spezial = false;
in /etc/squirrelmail/config.php
Ramin
--
To UNSUBSCRIBE, email to [EMA
enied
>
Looks like squirrelmail is trying to create a new folder (INBOX.Sent)
without having the proper acces rights.
If i remember correctly (switched to courier some time ago) you have
to give the user the right to create subfolders (c) with cyradm.
Hth,
Ramin
--
To UNSUBSCRIBE, e
local_part}
which spamassassin version? man spamc from unstable says:
-u username
This argument has been obsoleted. To have spamd use
per-user-config files, run spamc as the user whose config
files spamd should load.
for me it works fine without any options to
hat amavis-ng works better. You have to adjust paths and
permissions to make it work.
Ramin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
"Aedificator" <[EMAIL PROTECTED]> writes:
> Any experiences with Debian and WMware 3.X?
> Zee
Yes, fine
Ramin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
7;t know where the
> problem can be :((
>
> Roman
Debug output is in daemon.log if i remember correctly, you can always
grep gdm /var/log/*.
Ramin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
dom stuff to the syslog
Enable=true
in gdm.conf.
Other places to look:
/var/log/Xfree86*
Disks full?
Ramin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ndled but all logins are incorrect.
>
> With courier-imap this problem not appeared, all logins
> accepted.
>
> Anyone else encountered that same problem?
>
> Heilig (Cece) Szabolcs
>
Yes, Bug 162263 includes a patch.
Ramin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
ux users does sound like a lot of fun, but if
> there is a way I can do it "virtually", I believe the server
> performance will be much greater.
>
> TIA.
>
I use LDAP for storage of (virtual) accounts. Works fine with exim and
courier (imap,pop,ssl).
Ramin
--
To
be nice if I could just
> > compile a piece ...
> >
> > Any ideas?
> >
> > Thanks!
> >
> > Jen
I know next to nothing about postfix and maildrop, but i have courier
runnung with multiple domains and virtual users in combination with
exim.
Exim delive
/ ldaps:///"
> @(#) $OpenLDAP: slapd 2.0.23-Release (Sam Mär 16 17:04:30 CET 2002) $
>
[EMAIL
PROTECTED]:/home/ramin/tmp/server/ldap/openldap2-2.0.23/debian/build/servers/slapd>
daemon_init: ldap:/// ldaps:///
> daemon_init: listen on ldap:///
> daemon_init: liste
apd 2.0.23-Release (Sam Mär 16 17:04:30 CET 2002) $
[EMAIL
PROTECTED]:/home/ramin/tmp/server/ldap/openldap2-2.0.23/debian/build/servers/slapd
daemon_init: ldap:/// ldaps:///
daemon_init: listen on ldap:///
daemon_init: listen on ldaps:///
daemon_init: 2 listeners to open...
ldap_url_pars
tarted crashing again. Again, bad blocks on swap
partition.
Installed SCSI Controller and Disk, after some days the machine had
bad blocks again. This time i hooked the disk to another computer ran
badblocks again -> no bad blocks found!!
Finally i installed a new board, prozessor and memory and everything
is fine since (8 weeks for now).
Summary: Hardware is alive and evil!
Ramin
rmal, are we?! ;-)
>
> Any ideas?!
>
> Thanks,
>
> Ralf
>
I do not think rebooting will help :-).
You should give memtest86 a try, also checking for bad blocks on the
swap partition might be a good idea.
What kernel version are you running?
Ramin
this?
>
> Thanks.
>
> j.
>
What about adding a entry for proftp to the LDAP Tree and change the
acl to:
access to attribute=userPassword
by dn="" write
by dn="cn=proftp"
by self write
by * read
Ramin
dev/st0: Input/output error
>
>
> Any suggestions?
>
> --kurt
>
Hi,
what kind of Cartriges do you use?
I also use a HP DDS3 tape, and found out, that it doesn´t like some
tapes. Especialy Sony tapes dont work in this drive. Maxtor and HP
cartriges work fine.
Greetings,
Ramin
Foster
>
mwforum ( http://www.mawic.de/mwforum ) works nice for me and is GPL.
Ramin
Michael Heldebrant <[EMAIL PROTECTED]> writes:
> On Sat, 2001-09-15 at 08:48, Ramin Motakef wrote:
> > Michael Heldebrant <[EMAIL PROTECTED]> writes:
> >
> > > Ok, I've got courier-imapd installed and configured.
> > >
> > > How do I g
= /var/spool/maildirs/${local_part}/
headers_remove = "Bcc"
user =
group =
maildir_format
mode = 660
in the transports section and
maildir_user
transport = maildir_delivery
domains = from.somewhere.else.com
in the directors section.
Ramin
Joerg Johannes <[EMAIL PROTECTED]> writes:
> Ramin Motakef wrote:
> >
> > Joerg Johannes <[EMAIL PROTECTED]> writes:
> >
> > > Hi List
> > >
> > > Has anybody of you a dual-channel SCSI-Controller working?
> > > .
>
channel
operation (i do not think this will cause problems)
My older Adaptec 2940U2W works fine with Cdrom, CDR, DAT and 2
Hardisks on the SE an two other HDs on the LVD Channel.
ramin
Waldemar Brodkorb <[EMAIL PROTECTED]> writes:
> Hello Ramin,
>
> ..
>
> Hmm, where you find this attribute?
> $ grep -ir mailMessageStore /etc/ldap/schema
> $
In the qmail.schema: ftp://ftp.eyeo.com/qmail/qmail.schema
ramin
be you need a "~/Maildir"?
Another possibility is to install "courier-ldap" and skip pam.
You can then set the attribute names in authldaprc. Example:
LDAP_MAIL mail
LDAP_HOMEDIRhomeDirectory
LDAP_MAILDIRmailMessageStore
LDAP_CLEARPWuserPassword
LDAP_UIDuidNumber
LDAP_GIDgidNumber
HTH, Ramin
I dont know a real answer (like to know one myself :-), but as a
workaround you can use -x to do ldapv2 authenticaton.
Ramin
; couple of years, don't think I could live without it!
>
> TIA,
> Gary
>
>
Yes, runs fine here. X 4.0.3 from unstable and Matrox - Drivers from
ftp.matrox.com. Note that DRI, XV etc work only on the primary
monitor and onnly if you do not use xinerama.
Ramin
"Oliver Elphick" writes:
> Ramin Motakef wrote:
> >Hi,
> >since updateting postgres to 7.1 i get the followin mails from the
> >do.maintenance cron job:
> >
> >NOTICE: Cache reference leak: cache pg_operator (15), tuple 666 has count
>
pg_operator (15), tuple 98 has count 1
I have no idea what that means
Ramin
e Documentation/Changes in the
Kernel Sources:
Current Minimal Requirements
.
o isdn4k-utils 3.1pre1# isdnctrl 2>&1|grep version
HTH,
Ramin
ber for http and
> the fact that both my home network and school network have the same group
> of network addresses for localnet. Anybody some kind words of
> explanation?
>
> Hans
>
Ramin
hmod the
mountmoint as needed, umount and mount as user.
HTH
Ramin
uest ok = yes
> --
>
> Has anyone an idea?
>
> Thanks in advance,
> Bernie
>
>
>
Try this in smb.conf:
[global]
.
printing = cups
printcap name = cups
load printers = yes
print command = lpr -r -oraw -P%p %s
.
and install the required printer driver on the windows machines.
HTH,
Ramin
S.: My system is up-to-date unstable.
> --
> Michael Meskes
> Michael@Fam-Meskes.De
> Go SF 49ers! Go Rhein Fire!
> Use Debian GNU/Linux! Use PostgreSQL!
>
>
Works for me (2.4.2 + mozilla,w3m)
Ramin
rox source and the X source (debian src package) and
recompliling.
After the compile (wich takes a real long time) i copied
the matrox drivers (mga_drv.o, mga_hal_drv.o) from
/build-tree/xc/programs/Xserver/hw/xfree86/drivers/mga
to
/usr/X11R6/lib/modules/drivers/ .
The instructions for compiling are in the matrox-source, you will find
more info in the matrox-forums as stated in another mail.
HTH,
Ramin
e tabel], which does not work with dbf of starbase table
> formats)?
>
> TIA
> Thorsten
>
Nice info (in german) is at
http://www.oxano.de/postgres/staroffice.html
HTH,
Ramin
plug in the power connector of the disk
(draws quite a lot of current when spinning up, [i tried it]).
After all, i would say it is possible, baut mature and good
ramin
"Ralf G. R. Bergs" <[EMAIL PROTECTED]> writes:
> On 12 Aug 2000 11:14:50 +0200, Ramin Motakef wrote:
>
> [...]
> >is the routing on the host/guest machines correct?
>
> I'm pretty sure it IS correct.
>
> >Example:
> >
f you use the same subnet for host/guest and lan, the host has to do
bridging of IP-Packets between the two interfaces, i have no idea how
to do this on NT.
HTH,
Ramin
s not supposed to accept
>any conections over the TCPIP. WHat is the problem?
>
> Thanks.
>
> Sebastian Canagaratna
pgaccess needs to be able to talk to the postmaster over tcp/ip.
enable it in /etc/postgresql/postmaster.init (PGALLOWTCPIP=yes).
Check /etc/postgresql/pg_hba.conf for restricting connections.
HTH, Ramin
eft the
> '/etc/lpd.conf' to its original state. Anyone an idea of what the
> problem might be?
>
>
You need to allow acces to the printers in /etc/lpd.perms
HTH,
Ramin
LC_ALL=de_DE
LANG=de_DE
And modify /etc/pam.d/gdm :
#%PAM-1.0
auth required pam_unix_auth.so
auth required pam_env.so<
account required pam_unix_acct.so
password required pam_unix_passwd.so shadow
session required pam_unix_session.so
For Bash in /etc/profile:
set -a
. /etc/environment
set +a
Ramin
but that doesnt work since that "file" already exists.
>
> Nor can i remove the scsi module, since i have compiled it into the
> kernel. Perhaps a bad idea.. I'll recompile it and make it as a module
> instead..
>
> Does anybody know how to reset this burner or the scsi card so that i can
> use the burner again without rebooting ?
>
> Thanks in advance
>
> /Jonas
>
HTH Ramin
local
view allincluded .1 80
view system included .iso.org.dod.internet.mgmt.mib-2.system
access MyROGroup "" any noauth0 allnone none
access MyRWGroup "" any noauth0 allallnone
Read the man page to find out what that means :-)
Ramin
Sorry, was intendet for debian-user-de
en für Vor und
Nachteile haben, ob es bekannte Probleme gibt etc...
Die Internetverbindung lief bisher über ISDN, es hängt ein Netz dran,
dem über Masquerading bzw. Proxy der Zugang ermöglicht wurde.
Gruß,
Ramin
P.S.: Den TDSL-Zugang ans laufen zu bringen war super einfach: Kernel
patchen, k
Ron Rademaker <[EMAIL PROTECTED]> writes:
> A few days ago I posted this:
>
>
> I've made it, from a windows pc I can call in to my linuxserver that uses
> ISDN but, there's a connection but theer's no communication. The typ
Adam C Powell IV <[EMAIL PROTECTED]> writes:
> Ramin Motakef wrote:
>
> > Hi!
> > Don´t know if this is our problem, but after a recent ubgrade of a
> > slink box the +::: entryies in /etc/passwd and /etc/group on this box
> > where missing.
> >
> &g
slink box the +::: entryies in /etc/passwd and /etc/group on this box
where missing.
I didnt notice this at first, as i was logged in as root, so i dont
know which package caused this (base-passwd??).
Anyway, editing /etc/passwd and /etc/group solved the problems with
nis for me.
HTH, Ramin
to write an proxy autoconfiguration file if
you have a lot of clients.
If you are interested i can send you an example.
HTH Ramin
ome time
Some Ideas to test:
Does the automounter unmount if you send him USR1 signal? (Worked for me)
Do the logs show something that looks like an error?
As a workaround i had set up a cron job to send the automounter a USR1
Signal to do the unmount.
Ramin
and use this printer like a printer one a unix
printserver (Printing Howto).
If it is Win9x you need the smbclient program (from
smbclient_XXX.deb):
$ smbclient //server/printer
> print myfile
you can use the example script in /usr/doc/samba-doc/examples/printing
to automate printing.
Ramin
efault pipea2ps -q -M A4dj --borders=0 --header="Printed by
$LPUSER at $LPHOST" --center-title="$LPJOB" -2 -o -
without a linebreak.
HTH, Ramin
: command not found
So i did:
[EMAIL PROTECTED]/root]# ssh -x vmdebian echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11
wich seems ok for me.
So if anyone has an idea what i can do to make it work...
Thanks,
Ramin
te. Be shure to
have a full backup!
Greetings,
Ramin
If I remember correct, SO3 needs Motif libs for the setup programm.
Version 4 and 5 don't.
HTH
Ramin
"Jeff Browning" <[EMAIL PROTECTED]> writes:
> Hey all,
>
> I just got Star Office 3. My ISP automatically disconnects me after four
> hours even if I&
S.: I have "exec gnome-session" in my .xsession if that matters.
Thanks, Ramin
read mail with emacs/gnus, and have read mail in mailinglists
autoexpired (deleted) after some days, so that the folder keep a
reasonable size.
I can mail you the scripts if you are interested,
Ramin
"Jay Barbee" <[EMAIL PROTECTED]> writes:
> Does anyone have a script that will
when i tried it last time (witch was about 1/98).
Good luck,
Ramin
Michael Beattie <[EMAIL PROTECTED]> writes:
> I am nearly at my wits end. Who has got a TV program for Linux working??
>
> I have kwintv sources, xwintv sources and the bttv sources. the bttv stuff
>
ppauge Win/TV, Miro PCTV and
others)
and a progamm to view TV there.
I have it working here as module for 2.0.34 , with Miro PCTV and Millenium II
cards.
ramin
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
"Hilton Fernandes" <[EMAIL PROTECTED]> writes:
[EMAIL PROTECTED] dpkg -S rpc.bootparamd
netstd: /usr/man/man8/rpc.bootparamd.8.gz
netstd: /usr/sbin/rpc.bootparamd
^
This is on a hamm system.
> REPOST:
>
> Sorry to insist, but it is very urgent, and besides, maybe
ble using the multicd-install method.
Great Work, many thanks to all the Developers!!!
Ramin
-BEGIN PGP SIGNATURE-
Version: 2.6.3ia
Charset: noconv
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface
iQCVAwUBNZ+SO/Q9+Dm4/+DZAQGaMwP+MYr+KfVmCq4wFbZlqumW/oOUkplKzjqU
tKIP9wycAMxyAK
> --
> Deniz Dogan
>
I had the similar problem.
mmencode is now called mimencode ( in package metamail ).
So a link will help:
lrwxrwxrwx 1 root root 18 Mai 30 11:44 /usr/bin/mmencode -> /usr/bin/mimencode*
Greetings,
Ramin
P.S.: Bug is already reported
-BEGIN PGP SIGNAT
that the zip drive is
mounted as drwxr-xr-x root.root /misc/zip, so windoze clients can´t write on it.
I RTFM, but did not find a way to set other permissons.
Any ideas someone?
Thanks, Ramin.
-
E-Mail: [EMAIL PROTECTED
s bash
- -snip-
Pre-Depends: libc6, ncurses3.4, libreadlineg2 (>= 2.1-4)
^
- -snip-
Thanks
Ramin
- ---
E-Mail: [EMAIL PROTECTED] Date: 17-Apr-98 Time: 16:34:04
- -
useabel. I have the latest libc6, ncurses3.4 and libreadlineg.
Previous Version of bash was 2.01-5.
So, if there is anyone out there who can help.
Thanks,
Ramin
-
E-Mail: [EMAIL PROTECTED] Date: 17-Apr-98
-BEGIN PGP SIGNED MESSAGE-
Hi!
Works fine here with 2.0.32, X 3.3.2 , Matrox MilleniumII.
I had some problems with X 3.3.1 (screen locked). ATI Mach 64 was also OK,
S3 Trio64 was not. I guess you have a problem with your X-Server or Card.
Greetings, Ramin
es a shell?
Greetings,
Ramin
-
E-Mail: [EMAIL PROTECTED] Date: 23-Mar-98 Time: 14:38:32
-
-BEGIN PGP SIGNATURE-
Versio
Package. The binary lies in
/usr/local/netscape404/ and is softlinked against /usr/local/bin/netscape.
java40.jar is in /usr/local/netscape404/java/classes/
Good luck, Ramin
---
.
But now it only works if i start i.e. swriter from the initial xterm or from
xterms started from this one, but not from a menu or fvwm2-button.
I log into X via XDM.
Any Ideas welcome
Ramin
--
E-Mail: [EMAIL PROTECTED]
Date: 10-Aug-97
Time: 17:55:10
This
71 matches
Mail list logo
