Has anyone installed Linux on a ThinkPad 380z ?
Any problems, suggestions...?
Matthew
Check out www.xinside.com for supported cards for AccelX.
Personally I only use number9 cards.
The 32Meg IV just came out, I'm sure AccelX will have a driver for it
soon.
Matthew
On Wed, 7 Oct 1998, Michael Meskes wrote:
> I'm about to buy a new machine and wonder for which hardware to go. It
It looks like he installed the base (all the disks) but none of the
default packages that dselect defaults to. ?
You should review all the packages that dselect defaults to for the first
time, and install all of them.
On Mon, 5 Oct 1998, Shaleh wrote:
> Brian, the man command needs a pack
I think I have one listed on my page somewhere.
http://www.linuxapps.com/
Matthew
On Thu, 1 Oct 1998, Paul Reavis wrote:
> My latest motherboard has a CPU temp sensor and fan tachometer feature.
> Are there any linux drivers/programs for reading these?
>
> --
>
> Paul Reavis
On Tue, 29 Sep 1998, Raymond A. Ingles wrote:
> On Mon, 28 Sep 1998, Mrpeabody wrote:
>
> > My moniter screen has become wavy. When you look at it it seems to
> > move. I have a 21 inch dell moniter and a stb nvidia video card. My
> > moniter used to be fine but I recently moved it and now
Does anyone know when the 2.0 release will actually be released ?
Matthew
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
Does anyone know why the "table=" config statement
is required in the subsections of "other" operating systems
for the lilo.conf file ? ...why does windows or msdos have
to know where the partition information is ?
Thanks,
Matthew
--
table=device
This specifies the dev
Has anyone recently installed Debian on a new Gateway system ?
What works, doesn't work ?
Please mail me.
Thanks,
Matthew
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
I am running Debian with 1 IP address and like 20 or 30 virtual hosts,
and EVERYTHING works. :)
On Thu, 2 Jul 1998, Jieyao wrote:
>
> > > I am currently setting up a Mail and Webserver (hamm, 2.0.33). I have
> > > got a whole package of 256 IP addresses that I want to assign to this
> > > ser
I only have 1 main IP address (actually 5, but only one is used),
and I host a number of domains for web space and mail
I use Apache, and Qmail
Both are really good for Virtual Hosting
Matthew
On Wed, 1 Jul 1998, Ian Eure wrote:
> On Wed, Jul 01, 1998 at 02:55:39PM +, Andy Spi
27;ve not done it myself but this is probably where you
> want to
> look. The new operation is IXFR (just as you suspected).
>
> matthew tebbens wrote:
>
> > At a local ISP I have a co-located system.
> > Is it possible to dial-in to the ISP on a NON-dedicated
> >
At a local ISP I have a co-located system.
Is it possible to dial-in to the ISP on a NON-dedicated
line, and have my home system tell my co-located system
its IP address. So I can setup the co-located DNS with
the same hostname that works...each time my home system
connects ?
I assume this would b
I keep a local debian mirror of the i386 stuff for both stable & frozen,
for a bunch of people here at the isp, and a few friends.
Anyways,
I think I have the mirror config file and local directories setup
correctly. Is anyone also mirroring the i386 stable and/or frozen ?
Maybe you can look at
Is anyone running Debian -> Internet via ISDN ??
Please mail me, I'd like to ask a few questions
about the setup.
Thanks !
Matthew
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I suspect a spammer is using my system to relay or queue spam !
I'm using smail 3.2-3.
How do I check, know its being used as a relay ?
How do I stop this ASAP ?
How do I find the spammer ?
Thanks,
Matthew
Some data from /var/log/smail/logfile might help
---
Thought I would mention my site once here, for anyone interested
in looking up Linux Applications.
http://www.linuxapps.com/
The site is running Debian ! :)
Thanks,
Matthew
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Does anyone know of a kernel/other patch for limiting the output
of process informationetc ?
I've heard of the 'Proc Permissions Patch' but I don't know
if there is something better, or if that patch is unstable or does
not work correctly.
Thanks.
Matthew
--
E-mail the word "unsubscribe"
To just filter packets for my own machine I would have to add ?:
Network firewalls
IP: forwarding/gatewaying ??
IP: firewalling
Is forwarding/gatewaying required for filtering packets ?
Is forwarding/gatewaying required for masquerading ?
Can someone be more specific on
Is there anything out there to stop people from port scanning my system ?
I had someone last night scan my system from port 1 to 50,000 !
I heard that there is a portscand out there somewhere, if so where ?
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe"
Started cfsd
I created /null with mode 000
Exported it to localhost.
Created /var/sdb1/crypt
Did a mount -o port=3049,intr localhost:/null /var/sdb1/crypt
Everything seemed to work ok...
Now, I can't seem to get cmkdir to work, it keeps thinking that
its cpasswd ??
If/When I get cmkdir to work,
Any plans for Debian/Linux and this chip ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
IBM Thinkpads work best for me. Infact, I think they are probably the
most supported laptops for Linux...
On Wed, 7 Jan 1998, iquest wrote:
> Hi,
>
> Anyone has any experience with Debian/Linux on laptop.
> I'd like to know which laptop has the least problem
> with running Debian/Linux a
I just installed magicfilter myself and everything seems to work ok.
I just had 2 questions about it...
The latest version of magicfilter seems to be pretty old.
Where is the main distribution point, or web site for magicfilter ?
I'm using one of the HP filters for my printer, but I'm not sure i
When I switched the servers around, I forgot to edit /etc/hosts which
had my server name with the old IP address. Took a whole day just to
find that ! :)
Thanks for the reply anyway !
Matthew
On Mon, 22 Dec 1997, Jens B. Jorgensen wrote:
> matthew tebbens wrote:
> >
> > Aft
Hmmm interesting !
Thanks.
On Mon, 15 Dec 1997, David Wright wrote:
> On Mon, 15 Dec 1997, matthew tebbens wrote:
>
> > On Mon, 15 Dec 1997, David Wright wrote:
> >
> > > On Sun, 14 Dec 1997, matthew tebbens wrote:
> > >
> > > > (victor)[roo
locks..
Matthew
On Mon, 15 Dec 1997, Tim Sailer wrote:
> matthew tebbens wrote:
> >
> >
> > Thats over 250megs of tables and internal structures ?
> >
> > Wow...
>
> There is also 5% reserved for root, unless you specified otherwise
>
> Tim
&g
Thats over 250megs of tables and internal structures ?
Wow...
On Mon, 15 Dec 1997, Scott Ellis wrote:
> On Mon, 15 Dec 1997, matthew tebbens wrote:
>
> > But I don't have 4,401,778 blocks, I only have a total of 4,253,289 blocks
> > which becomes aprox 4,355,367,000 b
On Mon, 15 Dec 1997, David Wright wrote:
> On Sun, 14 Dec 1997, matthew tebbens wrote:
>
> > (victor)[root:~#] mke2fs -c -v /dev/sda1
> > mke2fs 1.10, 24-Apr-97 for EXT2 FS 0.5b, 95/08/09
> > Linux ext2 filesystem format
> > Filesystem label=
> > 11018
I'm trying to setup 4 4.51gig scsi drives.
I used the following to setup the drives:
(victor)[root:~#] mke2fs -c -v /dev/sda1
mke2fs 1.10, 24-Apr-97 for EXT2 FS 0.5b, 95/08/09
Linux ext2 filesystem format
Filesystem label=
1101824 inodes, 4401778 blocks
220088 blocks (5.00%) reserved for the sup
After switching my servers(2) around I now get the following message
when I try to talk with anyone:
[Couldn't bind to control socket : Cannot assign requested address (99).
Why ? What can I do to fix it
I'm sure it just a configuration error as I didn't change anything else.
Thanks,
Matthe
I was using root at first. After checking with other users I did
notice that only root was not allowed. Now by adding no_root_squash
everything works fine !
Thanks.
On Thu, 11 Dec 1997, Jens B. Jorgensen wrote:
> Matthew Tebbens wrote:
> >
> > I would like to mount one of my s
I would like to mount one of my servers and have that server
allow access from the requesting uid/gid just as if it were
local possible ?
If so, how would I specify that in /etc/exports ?
(As root on the remote system, I would like access to root files
on the server via NFS, same with other
As much as possible.
Hmmm accountingI'll have to look into that.
Is there another way to log the commands AND options ?
Thanks !
Matthew
On Fri, 5 Dec 1997, Stephen Zander wrote:
> Matthew Tebbens wrote:
> >
> > Is there a way to log all commands typed by someone
The one thing I like about Micron is that they have more options
to pick from. I can almost pick all the hardware that will work
with Linux. With Gateway I don't like the video cards, and
sound cards they offer...
I would probably buy from Micron in the future.
On Fri, 5 Dec 1997, Robert D. Hi
Is there a way to log all commands typed by someone ?
ttysnoop does not work all that great,
.bash_history only logs AFTER the person logs off,
not sure if I can alter bash to log everything...
I looked at telnetd, but I'm not sure if any of the
debugging features do this.
Something where I cou
What type of network card do you have ?
Also post your /etc/init.d/network, maybe theres a problem in there.
No matter what the problem is, you really should re-compile the kernel
with support added for only those features you want.
Matthew
On Fri, 5 Dec 1997, Pancho Horrillo wrote:
> On Fri,
I have 2 harddrives in my system. The main hd is going bad
and I would like to copy everything to the second and use
that as the main drive.
Is it possible to copy EVERYTHING to the second hd and just
run lilo on it ?
If so, anyone know all the options to use with cp for this
to work ? (or a comp
Yup, found it !
I'm using 2.0.32
I re-compilied the kernel, added support and everything seems to
work just fine. I still have to add my external scsi drives at
a later time I think the following Warning message is related
to that.. ?
Thanks again for the help!
kernel: aic7xxx: at PCI 11
k
I know Linux supports the 2940, but while re-compiling the
kernel I don't see anything with '2940'.
Are there any web pages or mailing lists with help/support
for th Adaptec AHA-2940 ??
Thanks
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED]
My USR v.everything w/x2 flash upgrade works fine. The x2 part would work
better if I paid the $60 or so and called that USR bbs and get it turned on.
On Thu, 13 Nov 1997, Kevin Traas wrote:
> >> Can anyone make any recommendations for K56Flex modems (preferably
> >> external) that work well un
What happened to os.inf.tu-dresden.de ??
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Is /etc/networks used the same as /etc/hosts ?
Can someone post an example of all the formats for /etc/networks ?
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
My system recently has been re-booting.
I suspect that its wu-ftpd. It seems to re-boot after an interruption
during an ftp session. Has anyone seen this before ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
Are you sure you have support for for pci & apm in your new kernel, did
you install the new kernel ? Those are exactly the same messages that I
had...after adding kernel support for apm & pci, everything went away..
Matthew
On Wed, 29 Oct 1997, Holger Brandhorst wrote:
> Hi!
>
> when startin
Has anyone noticed idled causing crashes/reboots ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble?
e-mail to [EMAIL PROTECTED] .
Just compilied 31, and had the following 2 warnings. I'm sure its nothing
but I thought I would post them here anyway for reference...
Matthew
gcc -D__KERNEL__ -I/usr/src/kernel-source-2.0.31/include -Wall
-Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strength-reduce -pi
GATEWAY} > /dev/null &
;;
stop)
ifconfig eth0 down
;;
*)
echo "Usage: {start|stop}"
exit 1
esac
exit 0
---
On Fri, 24 Oct 1997, dpk wrote:
> Yes Please!
>
> Thanks,
> dpk
> --
> dpk <[EMAIL
I have a working setup for the 3c589. When I get home from work I'll send
you any information you need from it...if you want?
On Fri, 24 Oct 1997, dpk wrote:
> I recompiled a 2.0.29 kernel to replace the Debian 'stock' kernel because
> it is so large and it hangs for a long time loading the 'md
>From the system you are telnetting from (system running the x-server),
try using 'xhost +' or xhost +(name of machine allowed access). You have
to allow other systems to connect to the x-server by using the xhost
command. xhost +hostname or xhost -hostname
Matthew
On Thu, 23 Oct 1997, Mario J
Didn't see that 'same machine' in my first response.
Try allowing access from both localhost & the hostname.
If you telnet to localhost then I think the display is set for
localhost ... same with the host name. So if you don't have access
granted to whats set for the display
On Thu, 23 Oct
Anyone know if AGP is supported by one of the x-servers ?
I was looking at the #9 revolution3d 8megs w/AGP.
That card is supported by accelX, but I'm not sure if AGP on the card
matters ?
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTE
I guess there will be AGP support very soon !
Matthew
-- Forwarded message --
Date: Thu, 23 Oct 1997 10:27:41 +0100
From: Graham Gedeon <[EMAIL PROTECTED]>
To: Matthew Tebbens <[EMAIL PROTECTED]>
Subject: Re: accelx 4.1
Matthew Tebbens wrote:
>
> I see that
I've heard that it might not be a good idea to create the 3 links
that the kernel sources ask for ??
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Can someone recommend a good motherboard for use with SMP Linux ?
I was looking at the DK440LX by Intel for use with dual pII 300's,
it comes with an onboard Adaptec 7895 Dual Channel SCSI controller with
RAIDport... not sure if Linux supports that controller.
Thanks.
Matthew
--
TO UNSUBSCRIBE
No, I was not running patch as root.
I've done it a number of times now with the same result !
I have not changed anything with regard to patch
I'll test again today, but I'm sure I'll get the same
results.
Matthew
On Sat, 18 Oct 1997, joost witteveen wrote:
> >
> > I'm not sure if this
I'm not sure if this is suppose to happen, but it sure
looks serious to me...
While patching some source code I noticed that all the files
that were patched were now group owned by root !?!
The command I used was:
patch -p1 < patch.diff
I've done this a few times to check, and each time it chan
GV works great, try that.
http://wwwthep.physik.uni-mainz.de/~plass/gv/
On Fri, 17 Oct 1997, Wiria Amadja Kusuma wrote:
> Hi all, I got problem viewing files with ps extention, I had tried gs and
> ghostview, no luck with both, yield me this error message in a pop up
> windows:
>
> Error: /und
The Sambades package on the overseas site has permissions problems.
Anyone notice this ? Is it on purpose ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
On Tue, 14 Oct 1997, m* wrote:
> Dirk Kievith wrote:
> >
> > My purpose is to set up a small *intranet*, with about 2-3 machines to
> > start with, to offer email and web-browsing facilities to multiple users.
>
> > My main querry is how to go about it:
>
> > - which e-mail software,
>
> smai
have the script
wait a few seconds after starting cardmgr for just this reason. Theres
no other fix then 'sleep' to the scripts right now..I think..
Thanks for the response !
Matthew
On Mon, 13 Oct 1997, Ralph Winslow wrote:
>
> On 14-Oct-97 Matthew Tebbens wrote:
> >
>
I'm trying to start the network after cardmgr starts, but cardmgr takes
too long and network dies because it can't find eth0.
Is there a way to execute /etc/init.d/network ONLY after cardmgr completes ?
This way I don't have to be around during a reboot !
Thanks,
Matthew
--
TO UNSUBSCRIBE FRO
If you give up on which one to use, try the readme file it comes with.
Its really easy to install by hand.
Matthew
On Mon, 22 Sep 1997, Timothy Phan wrote:
> Hi,
>
> I'd like to know which installer (if any) should I use to install
> the netscape/communicator professional edition.
>
>
Make that,
Corel.
Try http://www.sdcorp.com/wplinux.htm
On Tue, 23 Sep 1997, Lawrence wrote:
> WordPerfect? who is selling it?
>
> Matthew Tebbens wrote:
> >
> > Great, I read on this list before about some other Netscape packages
> > locking up, don't re
Coral.
Try http://www.sdcorp.com/wplinux.htm
On Tue, 23 Sep 1997, Lawrence wrote:
> WordPerfect? who is selling it?
>
> Matthew Tebbens wrote:
> >
> > Great, I read on this list before about some other Netscape packages
> > locking up, don't remember which
97, Daniel Doro Ferrante wrote:
> On Mon, 22 Sep 1997, Matthew Tebbens wrote:
>
> > Date: Mon, 22 Sep 1997 10:08:19 -0400 (EDT)
> > From: Matthew Tebbens <[EMAIL PROTECTED]>
> > To: debian users
> > Subject: NS Communicator out for Linux
> > Resent-Date: 22
Looks like Communicator 4.03 is out for Linux, has anyone installed/tested
it with Debian ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I got it to work with IBM's internal tokenring network.
Whats the problem ?
What have you tried so far ?
Matthew
On Mon, 15 Sep 1997, Greg Vence wrote:
> Hello,
>
> I've read the mini-FAQ on token ring and they don't talk about Debian.
> What are the steps to successful tr0 ?
>
> Thanx --
Anyone know if I can have ALL mail forwarded somewhere else, like this ?:
Matthew
---
# This is the aliases file - it says who gets mail for whom.
# It was originally generated by `smailconfig', part of the Smail package
# distributed with Debian, but it may edited by the mail systemadminist
Cucipop / Qpopper
Any suggestions on which to use, basically...which is better ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Forget this question, I answered my own questions... :)
If anyone needs help with multiple domains using the same Smail, let me
know, I got it working.
Matthew
On Mon, 8 Sep 1997, Matthew Tebbens wrote:
>
> I have a few www virtual hosts on my system, and I'm using Smail.
>
I have a few www virtual hosts on my system, and I'm using Smail.
I would like Smail to handle the mail for the domains I setup that
point to the system.
The way I understand it, is that you should not input the domain info
in /etc/smail/config under 'hostname' as that is used only for the
main h
Does anyone have a good Apache PUT program/script ??
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I'm trying to compile a program and it's asking for libX11.a
What package contains this ??
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble?
e-mail to [EMAIL PROTECTED] .
Where can I specify that XDM start with the server option '-bpp 16' ??
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Can Smail handle mail for all the domains I control or do I have to switch
to Sendmail ?
Has anyone setup non-ip based virtualhosts ? Please mail me, I'm trying to
get it working now.
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED
Is anyone running Debian using an EtherLink III 3C589C pcmcia card ?
I'm looking for a module/support so I can use the card.
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
How can I disable an /etc/passwd entry. Isn't there something I can place
in the encrypted-pw section of /etc/passwd to disable the account ?
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Has anyone converted to/installed Apache non-IP based Virtual Hosting ?
Please e-mail me, I just had a few basic questions..
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Found this message in BUGTRAQ, not sure if it has been seen here yet...
Date: Fri, 1 Aug 1997 23:10:57 -0500
From: Matt <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Bugs in Debian Linux's ircd package
There are a couple
Restarting /etc/init.d/netstd_nfs still shows old connections when I
do a showmount or showmount -a
What do I have to restart to have showmount display the correct info ?
Thanks..
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble?
Is there a reason that my system configured itself to have 2 of the same ?
/usr/sbin/in.ntalkd is a link to /usr/sbin/in.talkd
Why 2 ? What am I missing ?
service talk
{
socket_type = dgram
protocol= udp
wait= yes
user= root
I kinda like the idea myself.
I don't think we could create a LINUX-Certified or should,
but what about a Debian Certification ?
Think about it,
If Debian were the first to come out with Certifications, it might
improve Debian's standing in the Unix/Linux community. Should definitly
think about t
I just installed Apache 1.2.0, but now I see the only SSL patch
for Apache is for Apache 1.2b8 and b10.
Has anyone 'done' Apache-SSL from the ground up ?
If so, what steps did you take ?
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED
Telnetting into my system I use a program called CRT.
Before rebooting today, everything displayed in full (takeing
up all of CRT's window)
After rebooting, It seems I keep getting pushed back to
80x25. One of the programs that does this is pine. Before
the reboot Pine use to fill the entire wind
reated the account)
Matthew
On Fri, 20 Jun 1997, Bruce Perens wrote:
> From: Matthew Tebbens <[EMAIL PROTECTED]>
> > My /etc/passwd is group owned by one of my users.
> > Does the group owner of this file change when a user changes his password?
>
>
> No. Change it back
Just noticed this
My /etc/passwd is group owned by one of my users.
Does the group owner of this file change when a user changes his password?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Just installed it myself, from what I remember there is no default config
file. You have to rename one of the installed config files to what
fvwm95-2 is looking for (forgot the name right now).
Matthew
On Tue, 17 Jun 1997, Alberto Ruiz wrote:
> I don't know what happended, but what I upgraded f
I just re-compilied the kernel for my system. I used 'make menuconfig'.
Is kernel support for JAVA binaries included by default ?
I don't remember seeing it in menuconfig, and I don't see anything in
/usr/src/linux/.config that would suggest it was an option.
Matthew
--
TO UNSUBSCRIBE FROM THIS
Is anyone here running Virtual Hosts for web access on Debian;
I understand you have to have a special kernel module
for this. Is this module installed by default ?
If not, what steps would I take to install the module ?
Also, I see no documentation on what modules can be loaded
while the system
There are 2 Netscape install packages, one for 3.01 versions, and one for
communicator BETA versions. I havn't tested the one for communicator.
Matthew
On Thu, 5 Jun 1997, Randy Edwards wrote:
> > For the record and mailing list archive;
> > The 128bit versions of Netscape 3.01 and 3.01Gold do w
For the record and mailing list archive;
The 128bit versions of Netscape 3.01 and 3.01Gold do work with
the currect Debian install package.
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Has anyone installed Netscape Gold 3.01 128bit with the installer ?
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Thats the problem, Netscape will only make it available through a web page
using a cgi that checks where you are (to make sure your in the US).
The program is offered up as 'promise.cgi', not the real file name.
I'm going to check it out today, see if it works.
Matthew
On Tue, 3 Jun 1997, Brian
Does the installer for Netscape/gold 3.01 work with the 128bit version ?
I'll have to rename promise.cgi to what the installer wants.
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Maybe someone can help me with a few problems I'm having with DDD.
During start-up I get a whole bunch of the following:
-
Warning:
Name: gdb_w
Class: XmText
FontTextWidth: no source
At certian times (or mouse clicks) in the progra
Can someone recommend a good GUI interface to GDB ?
I see there are programs like TGDB and XXGDB, but they seem to be old and
outdated. Maybe someone here is using, and can recommend a good GUI to
GDB.
Thanks,
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[E
Well, I did install GV and it does look good!
GV says it can display PDF if GS is ver 4 or better.
Debian does not have GS v4, its still at 3 something...
Time for an updated GS package!? :)
On Fri, 30 May 1997, Rick Macdonald wrote:
> On Fri, 30 May 1997, Matthew Tebbens wrote:
>
>
Can someone suggest a good PS or PDF viewer.
Debian has the GhostView and GV packages, but which does everyone like ?
>From reading the descriptions, GV looks better.
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMA
I'm using xinetd(xinetd.conf).
In xinetd.conf I have the following defaults for all services:
defaults
{
log_type= SYSLOG daemon
log_on_success = PID HOST EXIT DURATION
log_on_failure = HOST ATTEMPT RECORD
}
Can I also specify another log for telnet, ftp, rlogin
Happened to me on another system I had setup.
Didn't really spend much time on the problem, but I would be very courious
as to what is causeing the message.
btw: I also added default setting for all services. The install did not do
this, it just converted all of inetd services over. Also remember
1 - 100 of 135 matches
Mail list logo
