On 2010-01-31 13:43, Sthu Deus wrote:
> 2010-01-31 13:31:03 GMT-7 LOG: could not bind IPv4 socket: Address already
> in use
> 2010-01-31 13:31:03 GMT-7 HINT: Is another postmaster already
> running on port 5432? If not, wait a few seconds and retry.
> 2010-01-31 13:31:03 GMT-7 WARNING: could not
After running X for a few hours, the xorg server starts to use around
20% of the CPU. Is that not rather high? The computer is a laptop
running sid.
Here is an extract from a typical htop display (formatted to make it
less wide), sorted by CPU usage:
CPU[||| 29.0%]
http://en.wikipedia.org/wiki/Virtual_Network_Computing
В Втр, 28/07/2009 в 06:40 +0100, hadi motamedi пишет:
> Thank you for your reply . Can you please provide me with more details
> on your proposed NX, VNC ?
> Regards
> H.Motamedi
>
>
>
> On Tue, Jul 28, 2009 at
В Втр, 28/07/2009 в 06:22 +0100, hadi motamedi пишет:
> Dear All
> Can you please let us know what is the required service that needs to
> be enabled on the Debian server to allow for Remote Desktop Connection
> opened from the MS Windows client's side ?
> Regards
> H.Motamedi
>
As I know it's i
onfigured all it had needed) I exit from the chroot.
But, when I try to umount dir 'flash' I get:
#umount flash/
umount: /home/debuser/work/flash: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
I do and
In-reply-to:
<[EMAIL PROTECTED]>
I'm almost certain that the 40-second delay reported
in the previous message is due to tcpwrappers trying
to do redundant reverse DNS lookups.
I rebuilt exim from the version 3.36 source (same
version Debian has on Sarge). It does have a build
option for using tcp
I am investigating a problem on my LAN - some
operations seemed very slow.
There are 3 machines on the LAN. Two (leo.galaxy and
orion.galaxy) are only connected to the LAN. The third
(ursa.galaxy) is the firewall/gateway and also has a
connection thru a cable modem to the internet.
The test: on ori
Currently on my system I have the following email setup:
I am a RaodRunner cable user at home but have never actually used
their email address/servers because I work for a small ISP (dial-
up only) and use ours from habit and the convenience of
maintaining my email addresses myself with remote
I have one of the Esoniq Sound cards listed in the drivers setup when
you first install debian. I realized this after the fact, however.
What is the easiest / best way to go about installing this driver for my
sound card?
Never mind. Found my problem. My problem was with the machine running the
web server inside the local network, not with the firewall machine.
On Wed, 13 Jun 2001 [EMAIL PROTECTED] wrote:
> I have a Linux machine (Debian unstable with kernel 2.2.18) that is
> successfully masquerading for our loca
I have a Linux machine (Debian unstable with kernel 2.2.18) that is
successfully masquerading for our local network. I want to do port
forwarding so that machines on the Internet can see the web server of a
machine on the local net. Following the IP-Masquerading howto, I have the
following script w
It sounds as though you do indeed have a memory leak somewhere rather than
just a misunderstanding of the memory statistic numbers. However, I'm
quite certain that the problem has nothing to do with the kernel, but
rather a leak in one of the apps you are running. If you say that even
after shuttin
First install a ssh1 package (I think the ssh package is it), then do
the following (from /usr/share/doc/ssh2/SSH2.QUICKSTART.gz):
>>>
Then add the following 2 lines to ssh2_config placed at the same directory
of sshd2_config. With this configuration, ssh2 client will invoke ssh1
client when conta
I had the same problem which was solved by turning off "Plug and Play OS
Support" (or something like that) in the BIOS. Worked like a charm after
that. I got the info from somewhere on the website listed for the
driver. More information is there if that doesn't solve the problem (look
in the docs f
I'm not sure Nvidia's drivers work at 24bpp, so you might want to try
running at 16bpp. Also, you did remember to change the driver in your
XF86Config (or XF86Config-4 if that file exists on your system) file to be
"nvidia" rather than "nv", right?
Gerry
On Mon, 26 Mar 2001, Remco Blaakmeer wrote
Upon further investigation, I believe I found what makes home/end
work with xterm and Eterm on my system. In /etc/X11/app-defaults/Xterm,
the bottom of the file contains the following:
*VT100.Translations: #override ~Shift ~Ctrl ~Meta Delete:
string("\033[3~")\n\
~S
home/end work fine for me in Eterm and xterm. I'm running unstable. I
think the problem may be with your keyboard or X settings rather than with
the terminal emulator. Someone on here can probably give you more specific
places to look. I think there's a keyboard mini-howto. That might help.
gerry
Strictly speaking, you don't need an OpenGL-complient card to run or
develope OpenGL programs. They will run on any graphics card if you have
the libraries installed (Mesa on Linux). But if you need your app to run
really fast, then you'll want to get an OpenGL-complient card. Sorry, but
I don't ha
You need Windows in order to run win apps under Wine.
> Now the problem seems to be that when I try to install Windows apps,
> they look for Windows files that WINE does not yet have, and point to
> where they can be obtained at Microsoft's website. At least the
> xlibosmesa errors are no longer
You need xlibosmesa3, perhaps only available under unstable. I believe
the wine package incorrectly does not list this as a dependency.
On Mon, 19 Feb 2001, Leonard Leblanc wrote:
> Has anyone had any experience with using wine? I am currently doing alot of
> web development at work and _really_
I believe with X4, all the drivers are contained in the xserver-xfree86
package rather than having card-specific servers as with X3. You don't
need xserver-svga anymore.
On Tue, 13 Feb 2001, Peter S Galbraith wrote:
> After my upgrade to testing, I noticed that I'm still using
> xserver-svga (3.3
If I restrict access of a webserver (Apache) to certain domains or IP
addresses, I was wondering how secure this is. In other words, how easy
would it be for someone to fake where they are coming from to gain access
to my site?
Thanks,
Gerry
I asked this a week or so ago, but it was a day that the mailing list was
having trouble, so I wonder if many people received it. So, I'm asking
again. My apologies to those who got it the first time.
Is it legal to use mod-ssl (or apache-ssl) in the US for commercial
purposes? I've seen some conf
You need to recompile your kernel with "advanced power management BIOS
support" turned on. I think that's the only option you need (someone
correct me if I'm wrong). Your BIOS needs to support this as well (I
believe most modern BIOSs do).
Gerry
On Mon, 5 Feb 2001, Cameron Matheson wrote:
> He
Perhaps your Sawfish stacking is set to be on top. Press
Alt+Middle_Mouse_Button when your pointer is over the play list window and
your sawfish menu should come up. Select Stacking->Lower and maybe
History->Forget saved state. Also make sure Options->Always on top is not
selected from the XMMS men
Is it legal to use mod-ssl (or apache-ssl) in the US for commercial
purposes? I've seen some conflicting documentation on the matter (and it
seems like I heard laws changed regarding this recently as well???). Also,
is using mod-ssl or apache-ssl as secure as one of the secure commercial
apache sol
Is there an easy way to compile a Debian source package with debugging
options turned on (removing the -O2 and adding -g to all the make
files) or is that something that has to be done manually? Something like
dpkg-buildpackage --debug???
Thanks,
Gerry
Thanks. I now see that this program is contained in the hwtools package
(in woody).
Thanks again,
Gerry
On Wed, 24 Jan 2001, Christoph Simon wrote:
> On Wed, 24 Jan 2001 11:21:47 -0700 (MST)
> <[EMAIL PROTECTED]> wrote:
>
> > Several years ago in Debian there was a program that created a boota
Several years ago in Debian there was a program that created a bootable
floppy that would check for bad RAM. I can't find it now. I think it was
called memcheck, but I'm not certain on that. Does anybody know what I'm
talking about and where I can find it now?
Thanks,
Gerry
Actually, I think it's just a minor bug in apt-get. I see it too even
though I'm not running hurd, it mentions hurd in brackets with the -s
option. I've never worried about it, since it provides the need
functionality - telling me what packages will be upgraded.
On Wed, 17 Jan 2001, Colin Watson w
> You wouldn't have these problems if you would ignore the damn code names
> and track the appropriate distribution. If you want to track unstable
> point to unstable, not woody.
>
> _Don't_ _use_ _code_ _names_.
But I did not want to track unstable, I wanted to track woody. That is, I
didn't wa
> You contradict yourself - if you were tracking woody you were tracking
> unstable. Since you were tracking unstable before I don't see why
> it's such a big deal to track it now ...
Maybe it's not worth a discussion, but when I started using woody before,
the stability of this machine was much
Uggh, they removed X4 from Woody? I'm not sure I like this testing
distribution thing. If I'm pointing at woody the whole time (which I
have), I don't expect packages to be rolled back unless something is
really wrong. So now that X has been removed from Woody, I must either
roll back to X3 also, o
I'm trying to install lesstif-dev on my woody (testing) box. It says it
depends on xlib6g-dev but xlib6g-dev conflicts with xlibs which is already
installed and is required by other packages. I don't see an xlibs-dev
either. Where are the development packages for X (4.01) in woody now? Do
they exis
I just setup a woody box to act as a masqerading firewall. Where is the
most Debian(woody) place to put my firewall configuration script to
be run a boot?
Thanks,
Gerry
Does anyone have any experience accessing MS SQL Server from Linux? Either
from C, Perl, or PHP? If so, what do I need in order to do this?
Thanks,
Gerry
I have a sound blaster live soundcard. I previously had alsa working
properly with the alsa drivers from woody. However, I recompiled to a
newer kernel and so I needed to download the alsa source and recompile
that too. I tried the alsa source from woody package, but it was an older
version and did
Now that woody is in the testing stage, many of the packages on my system
are newer versions than currently reside in woody. As some of the newer
packages on my system are broken, I would like to roll back to the current
woody snapshot. Is there an easy way to do this?
Thanks,
Gerry
More weirdness. When I downloaded rpm using ftp (rather than
apt-get) then did dpkg -i rpm... it worked fine. Hmm.
On Tue, 26 Dec 2000 [EMAIL PROTECTED] wrote:
> I've been following woody for some time. Today I tried:
>
> apt-get install rpm
>
> It fails with the following message:
>
> Sorr
I've been following woody for some time. Today I tried:
apt-get install rpm
It fails with the following message:
Sorry, but the following packages have unmet dependencies:
rpm: Depends: librpm1 (>= 3.0.3) but it is not going to be installed
Depends: librpm1 (>= 3.0.2) but it is not goin
In looking around some more, it looks like this is indeed the correct
behavior for "security = user" unless I add the following:
map to guest = Bad Password
or
map to guest = Bad User
Otherwise I need to switch to
security = share
Thanks,
Gerry
On Thu, 21 Dec 2000, Peter Horton wrote:
> On
I want Windows users on my network to be able to print to my printer
without a password. I have "guest ok = yes" in the printers share. I also
have "security = user" in the global section. Shouldn't this allow
printing without a password? Currently it does not. Printing does work
fine with a correc
I want to set up printing (preferably using magicfilter) for an HP
Laserjet 5N. Since I don't see this printer listed in the magicfilter
setup, which one works best with this printer?
Thanks,
Gerry
What's the best way(s) to tell all the functions contained in a library
or object file (other than reading the man pages)?
Thanks,
Gerry
We need to send out an email response from a CGI when someone places an
order, but we want to set the from address to something other than the
user/machine where the CGI is running. How to do this with the various
email packages? Currently using exim, but may switch to postfix or
sendmail.
Thanks,
About a month ago when installing a new system, I tried installing the
Gnome that comes with Woody (I've been using Helix Gnome on other
systems). I saw some strange behavior, but perhaps it was because I didn't
have a lot of suggested packages installed at the time. And, although a
trivial thing,
This doesn't work because helix is in the version number, not the package
name (except for about 3 packages). The matching seems only to match the
package name.
On Thu, 7 Dec 2000, Juergen Fiedler wrote:
> apt-get takes regular expressions, so a 'apt-get --purge remove "helix*"'
> should nuke ev
Probably not your problem, but make sure you have turned off "plug and
play OS" in your BIOS. This caused a major headache for me with another
card. Also, the ethernet howto may be helpful as well as looking at the
web sites for the driver of your card (probably listed in the source for
your driver
I read somewhere that you need to re-compile your kernel with VCD support
for the CD (or filesystem). I'm not sure if this option is available in
the standard kernel or if you need to download a patch from somewhere.
Gerry
I had a machine with this card as well. At the time I looked, the
documentation on xfree86.org said that this card is supported in the
developement version of X 4.?.?, but not currently supported in the
official release, but will be in the next official release.
Gerry
On Tue, 21 Nov 2000, Daniel
I was able to solve this problem by reinstalling xfonts-base. The problem
is discussed in /usr/share/doc/xfree86-common/FAQ.gz at the bottom. My
problem was that the /usr/lib/X11/fonts/misc/fonts.alias file did not
exist on the first install for some reason. The re-install fixed it.
Gerry
On Thu,
I just did a new woody install and tried installing X 4.0.1 on it. When I
run startx, X starts up but then crashes with the message:
Fatal server error:
could not open default font 'fixed'
I've installed xfonts-100dpi, xfonts-75dpi, xfonts-base, xfonts-pex, and
xfonts-scalable. Any clues what I'm
In Windows, when I shutdown the computer, it automatically turns off the
power. I believe it's something in the BIOS that allows this as not all
machines running Windows do this. Is there a way to make Linux do the same
thing? I like listening to MP3's as I go to sleep and would like have it
shut
What C/C++ libraries are available to get web pages from within a C
program? Preferably with the ability to do secure queries.
Thanks,
Gerry
I'm trying to print to a Laserjet 5 network printer. It seems to be
working for the most part, but, when the printer is down, instead of jobs
being spooled in the spool directory, the lpr command just times out and
fails. Shouldn't these jobs be waiting in the spool directory until the
printer is
On Fri, 11 Feb 2000, David Wright wrote:
> Quoting debuser ([EMAIL PROTECTED]):
> > I've setup mgetty (from stable) to automatically print faxes when they are
> > received. This works fine, but when faxes are recieved, it sends an email
> > to root. Is there any way t
I've setup mgetty (from stable) to automatically print faxes when they are
received. This works fine, but when faxes are recieved, it sends an email
to root. Is there any way to disable the sending of a message to root
upon receipt of a fax?
Thanks,
Gerry
Also,
There is more documentation for LRP that might be a little better at:
http://linuxrouter.sourceforge.net/documentation/LRP-2.9.4/lrp-sec-EtherToEther.html
Gerry
On Mon, 31 Jan 2000, Michelle Konzack wrote:
> Hello Peter,
>
> LRP is based on Debian 2.1 (2.0.36). There are several other M
After more tinkering around, I think I've found the problem. The problem
is that updatedb is not able to execute the frcode program which it calls
to compress the database. In looking at an older version of updatedb, it
contains the line:
: ${LIBEXECDIR=/usr/lib/locate}
but the version from po
I'm using potato. Today I tried doing "locate filename" and I got
"warning /var/lib/locate/locatedb more than 8 days old". My understanding
is that this is supposed to be updated daily via cron in the script
/etc/cron.daily/find. I wondered if cron was broken so I tried running
the script manual
I'm using licq (from potato). Since I don't have a sound card, I thought
I'd replace the playing of wave files in the OnEvents tab of the options
dialog with the command "echo -e '\a'" so my machine would beep when I get
a new message. The strange thing to me is that this works fine if I start
lic
On Tue, 11 Jan 2000, aphro wrote:
> were you ssh'd into shell.schwa.net when that message showed up? if you
> were it was your machine that was connected to the remote X server not the
> other way around.
No. I have no deliberate interaction with that machine whatsoever. I
didn't know that m
I had trouble with efax also until I used the version from the unstable
distribution. The version from potato didn't work well with my modem
(an older Supra). So, if you're not using the one from unstable, you
might want to give that a try.
Gerry
On Tue, 11 Jan 2000, Colin Telmer wrote:
> I am
Well, I've talked to the guy that owns that machine, and he assured me
that he wasn't hacking me, and I believe him. But now the question
remains, what caused this message? Any possible explanations out there?
Thanks,
Gerry
PS: I'm paranoid about being hacked since another machine on our netwo
>From my Linux box at work, I was using ssh to connect to my personal ISP.
I had X11 forwarding turned on. When I went to log out I got this
message:
Waiting for forwarded connections to terminate...
The following connections are open:
X11 connection from shell.schwa.net port 1087
Is someone
I inherited a Debian system running potato. The system occassionaly was
running out of memory so I thought I should increase my virtual memory.
Rather than repartitioning the hard drive to add another swap partition, I
thought it would be best to just use a swap file. So, I've created the
file w
I too doubt this is directly related to diff (but I could be wrong). Is
the clean_dir by chance on a network share? I did have a similar problem
with a Samba share. If someone logged onto the Samba machine and modified
a file, then a Windows machine on the network would not detect that the
file
I get a segfault when starting Enlightenment/Gnome (from pototato) about
20% of the time (logging in from xdm). I have an AMD chip.. not sure
which one though.
I just started using Enlightenment (had been using WindowMaker) and I must
say I'm *very* impressed and other than the occasional segfau
I installed mgetty-fax by accident and now want to remove it to use
hylafax instead (which conflicts with it), but when I remove, I get:
Removing mgetty-fax ...
Stopping Fax Queue Daemon: dpkg: error processing mgetty-fax (--remove):
subprocess pre-removal script returned error exit status 1
Fax
Oops, found them as soon as I sent this message (always happens). They
are in /var/log/mail.*. I was looking for something like /var/log/qmail.
Sorry for the wasted bandwidth.
Gerry
On Wed, 13 Oct 1999 [EMAIL PROTECTED] wrote:
> I've installed qmail from the source package (1.03-6) in potato.
I've installed qmail from the source package (1.03-6) in potato. It runs
fine, but I cannot find where it is keeping its log file(s). Anyone know
where they are? Or does it not keep a log by default.
Thanks,
Gerry
Also, kernels 2.0.36 and above are able to detect more than 64MB
automatically on most systems.
Gerry
On Tue, 12 Oct 1999, Marcin Kurc wrote:
> append="mem=96M"
>
> On Tue, Oct 12, 1999 at 01:03:31PM +0100, Rajesh Mittal wrote:
> > Hi
> >
> >I have got debian box with 96 Mb as ram .
>
I'm interested in peoples' experiences with the different databases
available for Linux. Probably the most important factors for me are
stability, followed by ease of use and power.
Thanks,
Gerry
On Thu, 30 Sep 1999, Johann Spies wrote:
> On Thu, 30 Sep 1999, Salman Ahmed wrote:
>
> > On a somewhat related note : is it possible to view compressed (.gz) files
> > with pagers like more/less ? I think I remember a thread about this either
> > on this list or on some linux NG a while back e
I have a cheap keyboard which has a Windows key next to the Alt key. On
the console, the Alt key works as expected, but in X, the Alt key doesn't
work. Instead, the functionality of the Windows key and the Alt key seems
to have been swapped (Windows key functions as the Meta key and Alt
doesn't s
75 matches
Mail list logo
