this is common to all the 945gc boards or not, but etch worked
for me with the exception of the built-in ethernet.
If you get bitten by the same bug, your options are to either a) install a pci
network card or b) install a newer kernel than 2.6.18. I opted for a kernel
from testing and everyt
orce chipset and was complaining of the same
problem. I ran out of ideas pretty quickly but he discovered that if he
disabled the firewalling features of his broadband router, the network speed
would go back to normal. (I'm not sure what his ultimate solution was.)
If you are behind a r
itched to using ip
syntax instead of the 'old way.' Here's a sample of my interfaces file:
address 123.456.789.2
netmask 255.255.255.252
gateway 123.456.789.1
up ip addr add 10.1.250.15/24 brd 10.1.250.255 dev eth0 label eth0:0
up ip addr add 10.10.10.15/24 brd 10.10.10.255 dev eth0
FWIW you
> > should report the web site to it's owners as broken. User-agent
> > detection is broken behavior.
>
> I feel it's the website not knowing the browser, hense, unable to render
> the page properly. Thanks.
>
Not to get all gripey or anything, but there
ces on the system.
>
> /Magnus
While I'm not yet convinced that you've been rooted, the fact that top doesn't
show anything suspect is a moot point. If you have in fact been compromised
there's not a single binary on the system that you can trust, including top.
Regar
the boot prompt there will be an example of how to force
ide-generic or something like that (I don't have my CD handy.)
While slow, it worked well enough to get Lenny installed. I was then able to
install the 2.6.21 that was then in unstable. You may be able to get Etch
installed the sam
. I wonder if my
CD (which is quite a bit older than the one mentioned in the article) has
that problem. I do remember being impressed that the driver CD supported
Debian.
Regards,
Anson
--
ACHTUNG! ALLES LOOKENSPEEPERS!
Das computermachine ist nicht fuer gefingerpoken und mittengrabben
it, but its the same.
> What should i do?
>
> P.S. Tried "ifconfig eth0 down" and when it's down the message stops.
That makes sense, as your firewall has nothing to block when your network
interface is down.
Regards,
Anson
--
ACHTUNG! ALLES LOOKENSPEEPERS!
at the bottom of their message. Unfortunately, I have had this
problem not only with people who don't know any better, but also with other
technical people.
I've found it's easier to find out what mail client they're using and adjust
things accordingly.
Regards,
Anson
-
installed the 2.6.21 kernel from sid. It was more of a headache than I've had
before installing debian, but not a huge deal.
As I recall, the problem in my case was related to the Marvell PATA controller
and the kernel's lack of a driver for it. The symptoms were sluggish reads
from
lways use dd_rescue first to make an
image of the disk either to another drive or to an image file. ntfsfix could
fix his problem, but if not, it's a good idea to be able to get back to
square one.
Regards,
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "un
> The /var/log/kdm.log gave no help.
>
> Thanks,
>
> Kristian
I would suggest creating a new user on your system, and then logging in as
that new user. If everything works, you should be able to 'reset' your kde
settings by renaming your ~/.kde/ directory.
Good
s well, such as who the intended audience is, and the culture at that time.
On the other hand, I'd like to say that, in all my years online, this is the
nicest back and forth about religion that I have ever seen. Maybe it is
because it didn't occur on slashdot.
Regards,
Anson
>
//debian.websterwood.com/ etch main
deb-src http://debian.websterwood.com/ etch main
aptitude install kwebilder
Integrates with webshots and flickr. Works ok I guess, some good ones, some
bad.
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
What parameters should i tune from the Default "apache2-mpm-prefork"
> on Etch to take care of the Digg effect?
>
> Thankyou so much
>
> kind regards
>
> Siju
Can't wait to see the content. :-)
Regards,
Anson Gardner
nothing.) For the i810
driver to work, you might need to use the sources from freedesktop.org:
http://intellinuxgraphics.org./download.html
Hopefully you will avoid the problem I'm currently experiencing with the 2d
driver sources: https://bugs.freedesktop.org/show_bug.cgi?id=10430
In this
>
> Please copy me on reply as I am not on the mailing list
Regards,
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
of the server from the tar archive was
painless as well.
Have a great day,
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
s using Thunderbird on Windows...
> >
> > User-Agent: Thunderbird 1.5.0.9 (Windows/20061207)
> >
> > I wonder if he even has a Debian Linux machine to use to get it.
>
> WinZip might/should understand tar and gzip. If so (and there's but
> one way to find out
x27;m still a bit on the newbie side, I'd appreciate any suggestions.
> Avishai
I was able to use the module-assistant package to build and install the rt2500
drivers. module-assistant list-available found several RaLink chipsets you
could try.
Regards,
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
610447.html that addresses the
issue (??). I'm afraid I don't have the expertise to verify it or to
implement it but I hope that support for these new chipsets does show up
in Etch.
Regards,
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
seful?
-- hendrik
The thing to remember is that all these packages are already installed.
The new versions total 227MB, but the _difference_ in installed size is
only 1.5MB
Regards,
Anson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble?
er. Is your VideoRAM set too low ??
>awk '/Section "Device"/,/EndSection/' /etc/X11/xorg.conf
Section "Device"
Identifier "Generic Video Card"
Driver "i810"
# Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Note that I do get video when using the vesa driver. It's just slow :-(
>
>--
>Regards,
> Florian
Any help would be greatly appreciated.
Regards,
Anson Gardner
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ere's a field named "Main Server" (the 2nd field), what
should I typed in it if this is my primary DNS for the domain?
7. After I successfully host my domain, is there anything I've to
inform my ISP to update?
I know there are too many questions, sorry. Hope you could help me on
my questions, thank you.
Best Regards,
Anson
24 matches
Mail list logo
