cirrus/cs35l41 'Cannot Initialize Firmware. Error: -22'

Hi, What did you try to accomplish? install debian bookworm on Lenovo Legion 7 16ACHg6 What has happened (wrongly) instead? a) multiple errors in boot log saying 'failed to load cirrus/cs35l41...wmf', and after fix attempt 'invalid magic' and 'Cannot Initialize Firmware. Error: -22' b) sound

Jessie- iwl3945: could not read microcode: -12 (solved)

Hi All, I had exactly the same problem as described by Markos. Solution for me was to select in Grub "Advanced Options for Debian" and simply chose first option which in my case was "Debian .. with Linux 3.16.0-4-686-pae" and by selecting this it notified about missing firmware but didn't get stu

Kernel panic - 2.6.32, tcp_keepalive_timer

Good day! I am getting kernel panic with the kernel version 2.6.32 - call trace is available here: http://i.imgur.com/kHfhRy9.jpg Is there any ideas how to deal with this? Thank you! -- Vladimir Zagaychuk (VZ485-RIPE)

Re: can one rely on uname -i results?

Wow! Thanks everyone for answers. Its clear for me now. 2013/5/25 Vladimir Budnev > Goodday everyone! > > While trying some opensource utility I'v found that one of launching > scripts uses uname -i | grep x86_64 to check for 64/32 bit platform and > futher processing. >

can one rely on uname -i results?

Goodday everyone! While trying some opensource utility I'v found that one of launching scripts uses uname -i | grep x86_64 to check for 64/32 bit platform and futher processing. But on my desktop it gives "unknown", so script does not work as expected. And at the same time: steve@dbsteve: /home/c

Re: What is the best way to turn off the iptables

07/05/12 19:02, lina пишет: On Thu, Jul 5, 2012 at 10:50 PM, Darac Marjal wrote: On Thu, Jul 05, 2012 at 10:28:43PM +0800, lina wrote: Hi, What is the best way to turn off the iptables? # iptables --flush I tried before. # iptables -F # iptables -L Chain INPUT (policy DROP) target pro

Re: UDEV identical devices. How to?

07/04/12 02:29, Andrew Reid пишет: If you're set on using udev, it should be possible to find the devices under /sys somewhere (/sys/bus/pci/...), and query them for udev-sensitive attributes using udevinfo (or the appropriate udevadm commands), until you find something that differs between th

UDEV identical devices. How to?

Good day to all I am not sure which list this quistions should be send to so some overkill maybe. We have Debian 2.6.32 and DVB cards with two/four tunners on the each card. We want to assign specific number in /dev/dvb/ tree for each tuner. The problems is that from udev point of view thos

Fwd: Re: problems with Gnome and KDE

Sorry, I sent it to Modestas only, not to the list Vlada Original Message Subject:Re: problems with Gnome and KDE Date: Wed, 08 Jun 2011 22:12:25 +0200 From: Vladimir Kerka Reply-To: ke...@dinmont.cz Organization: Dinmont To: Modestas Vainius On 06

Re: problems with Gnome and KDE

On 06/08/2011 03:26 AM, Lisandro Damián Nicanor Pérez Meyer wrote: On Lun 06 Jun 2011 16:08:17 Vladimir Kerka escribió: Hi, Lisandro, thanks for your reply. I am using Sid for several years, with no major problems, I didn't notice crashing window manager before. I was not sure what to r

Re: Evolution is unusable

Hi Peter, many thanks for your advice, I did what you wrote and it's OK now (no surprise for you :-) ) Great! Many thanks once more HAND Vlada On 06/06/2011 12:26 AM, Peter Beck wrote: On 06/05/2011 11:49 PM, Vladimir Kerka wrote: some two or three weeks ago Evolution decided there

Evolution is unusable

Hi all, some two or three weeks ago Evolution decided there is no internet connection to my computer and from that moment it works offline. I can't get it back again, because "online" is grayed. I use Evo from Sid Please, help me Many thanks Vlada -- To UNSUBSCRIBE, email to debian-user-re

problems with Gnome and KDE

Hi, I really need help with two problems: 1. minor problem: whenever I start Gnome, there is message like this: "Jun 5 22:55:47 dunadan gnome-session[4527]: WARNING: Application 'nautilus.desktop' failed to register before timeout" in the syslog. I cannot put anything on the desktop and there i

Re: Re: SIGTERM received when installing Nvidia driver

. With best regards, Vladimir Morozov -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4dd606bd.8060...@gmail.com

contents of a CD (lenny) and what packages are needed for the basic (minimal) set OS

contents of a CD (lenny) and what packages are needed for the basic (minimal) set OS contents of each directory of the distribution and location of packages for a minimal installation (on CD) содержание КД (lenny) и какие пакеты нужны для базовой (минимальной ) установки содержание каждого кат

samba idmap and openldap. user add problem.

Hello! There is a samba (configured with backend idmap - http://kbase.redhat.com/faq/docs/DOC-4844 and http://wiki.samba.org/index.php/Ldapsam_Editposix) and ldap from lenny. Catalog filled with the necessary data for the samba. Workstations and users part of the domain. But there is a problem: A

kernel panic after Lenny update

Hi, I'm sorry to tell you that today's package update cost me a system crash. The problem was with the package netatalk which was starting services at boot time. This resulted in a kernel panic. To repair this I booted the system in a single-user mode and removed netatalk and its few dependants.

Re: kernel module i8k.ko - laptop fan control - help needed!

Hi Chris, Thanks for reply. > What does syslog say, i.e. > dmesg | grep i8k > > I have a Dell Latitude and: > dmesg | grep i8k > i8k: unable to get SMM BIOS version > In my case the dmesg output is the same. But this doesn't stop i8k from loading even without "force=1". > Also have a look at

kernel module i8k.ko - laptop fan control - help needed!

tell me if you know about any exploits for the fan of Inspiron 1525. Regards, Vladimir

Re: laptop does not resume after suspend

Eugene, Thanks for the advise about snapshots. > > Now laptop comes back to life after suspend. > Please also bug report it against acpid package using reportbug utility. > Done earlier today: Debian bug #507031 V

Re: laptop does not resume after suspend

> > Do you have an nvidia card in there by any chance? If so, are you using the > debian version of the non-free nvidia driver? > No, I don't have an NVidia card. I've got an Intel integrated one. I've found the reason. It's acpid_1.0.6-16_amd64. I downgraded to the version acpid_1.0.6-15_amd64.

laptop does not resume after suspend

Hi, Some days ago, following a normal package update, I noticed that my Dell Inspiron 1525 laptop doesn't resume after suspend any more. Now the only way to quit the suspended state is to switch the laptop off by pressing the power button. In fact I have no clear idea what package can cause this b

Re: problem: GNU Screen within gnome-terminal

[...] > I found that with 4.0.3-10 the screen is messed up when > there are Russian characters in mutt, although this version > does solve the messing-up problem with chinese utf-8 characters. I'm not sure if it's related, but screen can't handle utf-8 which is encoded in more than two bytes. --

Re: evolution unable send/receive post

Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/11/08 11:21, Ing. Vladimir M. Kerka wrote: Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/08/08 15:34, Ing. Vladimir M. Kerka wrote: Hi, some days ago I noticed Evo is not able to send/receive

Re: evolution unable send/receive post

Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/08/08 15:34, Ing. Vladimir M. Kerka wrote: Hi, some days ago I noticed Evo is not able to send/receive post - the button is greyed. I've searched in logs, googled, reinstalled packages, nothing helped so far. Please

evolution unable send/receive post

Hi, some days ago I noticed Evo is not able to send/receive post - the button is greyed. I've searched in logs, googled, reinstalled packages, nothing helped so far. Please, can s.o. give me a hint what to do? Many thanks Vlada -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Pr

High-quality bitonal documents in TIFF, PDF and JBIG2 formats

st Regards, Vladimir Boiko CEO XVEL Software mailto:[EMAIL PROTECTED] PS: This email message is an advertisement sent to target audience list obtained from mailing list broker. If you do not wish to receive this e-mail or if you receive it by mistake, we

Re: Profile for user and root ( locales )

Douglas A. Tutty wrote / napísal(a): On Mon, Aug 27, 2007 at 03:35:33PM +0200, Vladimir Strycek wrote: any idea where alse is setting for each user in bash ? i have small problem that when i log in to my debian box as user everything works great especialy the special character of Slovak

Profile for user and root ( locales )

Hi all, any idea where alse is setting for each user in bash ? i have small problem that when i log in to my debian box as user everything works great especialy the special character of Slovak language also MC looks fine etc... but when i su to root the special characters do not work anymore.

Re: Why apache do not respct charset on web page ?

Thomas Jollans wrote / napísal(a): On Wednesday 04 July 2007, Vladimir Strycek wrote: In www page is That tag is information for the *browser* on how to *de*code the page... You could try to set apache up to send a Content-Type header, and omit the tag. I doubt that would change

Re: Why apache do not respct charset on web page ?

Kumar Appaiah wrote / napísal(a): On Wed, Jul 04, 2007 at 04:46:25AM +0200, Vladimir Strycek wrote: Installed debian on mine second pc with apache and everything but all www pages start have the same issue. but apache do not respect this and i have "?" insted of special cha

Why apache do not respct charset on web page ?

ea what to set that apache will respect character code setting ? Best regards Vladimir -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Enable vim color?

Nelson Castillo wrote / napísal(a): On 6/17/07, Vladimir Strycek <[EMAIL PROTECTED]> wrote: Hi all, i used vim before on debian and when i was editing my python scripts ( i use vim mainly for python coding ) i've got nice colored syntax and so on... here in debian i have only blac

Enable vim color?

and is not available in this version: syntax on" but mine version of vim is 7.0.122 which is not that old i think. Any idea how to enable this ? or better yet any specialized colored python editor for console ssh ? Best regards Vladimir -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] wi

PaX - gresec patch

version paxctl - user-space utility to control PaX flags - new major upstream version Is it reasonable to install on production server ? what are proc and cons of this kernel-patch-grsecurity2 ? Do i need only kernel-patch-grsecurity2 , what are PaX flags ? Thanks and best regards Vladimir

Re: Couple setting questions

Douglas Allan Tutty wrote / napísal(a): On Mon, Jun 11, 2007 at 08:59:05PM +0200, Vladimir Strycek wrote: Douglas Allan Tutty wrote / napísal(a): On Mon, Jun 11, 2007 at 06:08:28PM +0200, Vladimir Strycek wrote: i returned to debian after abou 3/4 year with gentoo, i had my

Re: Couple setting questions

Douglas Allan Tutty wrote / napísal(a): On Mon, Jun 11, 2007 at 06:08:28PM +0200, Vladimir Strycek wrote: Hi all, i returned to debian after abou 3/4 year with gentoo, i had my box up and running in moments but there is one or two issues i noticed. 1. Apache seems to not recognize

Couple setting questions

... Anybody had similar issues and solved them ? Thanks and best regards Vladimir -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: (SOLVED) Huge fonts in openoffice.org user interface

ext interesting question is out of which hat Gnome > pulls its 96dpi idea. > Just for your info: on my laptop the results are as follows: vladimir:~> xrdb -q | grep dpi Xft.dpi:96.00 vladimir:~> xdpyinfo | grep resolution resolution:96x96 dots per inch Yes, i

Emacs-snapshot and freetype

I use emacs to prepare LaTeX files. This implies mixing latin and cyrillic letters within document. The use of other font formats gives rather ugly view on screen. P.S.S. Sorry, if my English is poor. --- WBW, Vladimir Lomov -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "u

Re: How to change some staff in evolution?

Kevin Mark wrote: > > Hi Vladimir, > I think what you want is to change the locale when you run evolution. > try this: > LC_ALL=en_US evolution > cheers, > Kev Another (stupid) question - how I should change the menu in Gnome in order to add LC_ALL=en_US ? Simply changin

Re: How to change some staff in evolution?

Kevin Mark wrote: > Hi Vladimir, > I think what you want is to change the locale when you run evolution. > try this: > LC_ALL=en_US evolution > cheers, > Kev Thanks Kevin, it works, but in this case everything is in English, including menus. It is fine, but I wonder if there

How to change some staff in evolution?

. How I could set up this? Kind regards, Vladimir. smime.p7s Description: S/MIME Cryptographic Signature

Re: Root privilege (SOLVED)

lem with file permissions - when I login as root, the import goes without any problem, and then I am able to connect as regular user. I do understand there should be better way to do this, but logging as root just for import the config file is much easier as any other methods. Kind regards, Vlad

Re: Вопрос по установ ке

" now) and asked to inform if any difficulties will arise. Kind regards, Vladimir. Bud Rogers wrote: > Very kind of you both to try to help the OP, and to explain to those of > us who do not read Russian. > > On Wednesday 10 January 2007 08:22, Vladimir Kozlov wrote: >>

Re: Вопрос по установ ке

more details (platform? SATA? IDE?). Алексей, можно ли немного подробнее - на какой платформе (i386/amd64) это присходит? Какой именно тип диска (IDE? SATA?) Kind regards, Vladimir. Алексей wrote: > Здравствуйте. > При установке Debian с DVD дисков (образы дисков скачаны по ссылкам сайта &

gforge problems

;m totally lost... Has anybody an idea how to install gforge in these circumstances? Kind regards, Vladimir. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFpO9r2LrwehIvHEQRAmuHAJ9J797ngh1NeC1Rwc1RjRx

Re: Cannot boot after sarge->etch upgrade

b (--unpack): trying to overwrite `/usr/share/man/man1/cvssh.1.gz', which is also in package gforge-cvs dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gforge-common_4.5.14-19_all.deb E: Sub-process /usr/bin/dpkg return

Cannot boot after sarge->etch upgrade

.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 05) 01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Kind regards, Vladimir. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with

NVidia triple screen question

xorg.conf file with this functionality? Kind regards, Vladimir. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFmk9f2LrwehIvHEQRAugwAJ0QVMy9UAucRD9H4Z7BH1MOfAjX/wCeKetO BsA44TRBavnoA729HlJBLoI= =YA+1 -EN

Re: Re: [half-solved] Re: Alsa needs reconfiguration after every reboot

shouldn't libesd-alsa0 be automatically installed with alsa instead of libesd? Kind regards, Vladimir. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

[half-solved] Re: Alsa needs reconfiguration after every reboot

gards, Vladimir. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Alsa needs reconfiguration after every reboot

- SiS SI7012 SiS SI7012 with CS4299 at 0x1c00, irq 11 But idea was good... ;-) Kind regards, Vladimir. Nigel Henry wrote: > > What does cat /proc/asound/cards show before you run alsaconf? I've had > problems with snd-usb-audio being detected as car

Re: Alsa needs reconfiguration after every reboot

he problem arise after installation of codecs based on [1], but I'm not sure about this. As for clean install - I'd better wait for stable etch and than will reinstall it. [1] http://www.debiantutorials.org/content/view/18/1/ Kind regadrs, Vladimir. stevendemetrius wrote: > > A

Re: Alsa needs reconfiguration after every reboot

CB1420 Cardbus Controller (rev 01) 00:09.1 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV18M [GeForce4 488 Go] (rev a2) Kind regards, Vladimir. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: U

RAID across kernel upgrade ?

step is to upgrade the kernel $ aptitude install kernel-image-2.4-686 About the follwing steps I'm not so sure, could you please help me with the following steps? -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble?

Re: qurious find error

ests (-?time), file size tests > (-size), tests of the inode number (-inum), and so on. Whatever test > you use, it must require a stat() call to get additional information > about the file from its inode. Thank you, I think I understand it better now. -- Vladimir Zolotykh -- To UNSUBSCR

Re: qurious find error

own (for me) switch that cases find to error that way. For example sudo find /proc -name foo -print doesn't error. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

qurious find error

Just out of curiosity, why sudo find /proc -group backup -print always terminates with find: /proc/N/fd/4: No such file or directory where N is always a new number ? [Sarge, GNU/Linux] -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of

Hydra - SSH

Hi, does enybody successfully installed hydra on debian ? i cant get it to work (compile) lots of missing files like hydra-sip.c:4:25: openssl/ssl.h: No such file or directory hydra-sip.c:5:25: openssl/err.h: No such file or directory hydra-sip.c:6:25: openssl/md5.h: No such file or directory h

xmove, ssh, and problems

But there is no xcalc window nowhere. Could you please tell me what I've been doing wrong and where is the window? Using Sarge, Xmove 2.0beta2-7 -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

m-a + fuse => unresolved references

m-a seems so simple that there is hardly any room for mistake. uname => 2.4.27-3-686 apt-get install fuse-source kernel-headers-2.4-686 m-a a-i fuse -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: sshfs?

e.o: unresolved symbol inode_change_ok_Rsmp_c6680fcf /lib/modules/2.4.27-3-686/kernel/fs/fuse/fuse.o: /lib/modules/2.4.27-3-686/kernel/fs/fuse/fuse.o: unresolved symbol unregister_filesystem_Rsmp_8c6d853f Could you please head me in the proper direction, what's wrong that time? -- Vladim

Re: sshfs?

o Linux kernel versi Being not an expert at all it's hard for me to be sure which one I should use. If I use `kernel-headers-2.4.27-2', very likely that it will be installed not in /lib/modules/2.4.27-1-386/ where all my modules are. Could you please clarify this point? -- Vla

Re: Disk Defragmentatio

it won't make much difference, and Linux distros fragment much less than > windows does (Unless MS has improved in that regard). I'd guess that OP wanted to make more partitions. If this is the case parted may help. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: How to find all configuration files I've edited?

the IMPORT command. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: How to find all configuration files I've edited?

afraid not, unless you put them under some VC yourself at a time since when you'd like to watch the changes. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Torrent client for CL

H.S. wrote: Vladimir Strycek wrote: error(s): [22:45:25] Problem connecting to tracker - timeout exceeded Seems that its more problem with tracker than program :( i tried download gentoo from gentoo homepage (torrent) its start right away... I Great! That means you are doing

Re: Torrent client for CL

H.S. wrote: Vladimir Strycek wrote: Where can i set port for btdownloadcurses ? From the command line: $> btdownloadcurses --minport XYZ --maxport PQR --max_upload_rate N file.torrent where XYZ is the minimum port in the range of ports you want to use (and which must be o

Re: Torrent client for CL

H.S. wrote: Vladimir Strycek wrote: Personally, I am a fan of the btdownloadcurses and btdownloadheadless clients. Both are part of the bittorrent package in Debian. -Roberto Niether one works for me :( something about cant connecting to tracker :(( Well, as long as

Re: Torrent client for CL

Roberto C. Sanchez wrote: Vladimir Strycek wrote: Hi, could somebody recommend mi some good and most user friendly torrent client for CL ( not web based) Personally, I am a fan of the btdownloadcurses and btdownloadheadless clients. Both are part of the bittorrent package in Debian

Torrent client for CL

Hi, could somebody recommend mi some good and most user friendly torrent client for CL ( not web based) Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Temeprature mesurment on procesor

Hi, how can i monitor aor check temeprature of my processor ? what modul i need in kernel etc.. Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Fstab - not mounting all

Andrew Sackville-West wrote: On Fri, May 05, 2006 at 09:33:00PM +0200, Vladimir Strycek wrote: Hi, Could somebody help me with setting booting order in kernel ? My actual problem is that fstab wont mount harddisk USB and SATA ( no problem with IDE where my system is) Actualy i can

Fstab - not mounting all

Hi, Could somebody help me with setting booting order in kernel ? My actual problem is that fstab wont mount harddisk USB and SATA ( no problem with IDE where my system is) Actualy i can mount them manulay when its boot finish and i log in. I looked in dmesg and there i found that all HDD i

Re: manually purge .deb file

inux > > Try to remove all firefox relating installation files included in /var/lib/dpkg/info (ie. firefox.postinst, firefox.postrm, firefox.preinst,firefox.prerm) before doing dpkg -P firefox, HTH. Matej - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republi

firewall error message

could the mistake in the firewall (my settings of course) be the likely reason for these error messages or not? -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: How to find software?

or Synaptic - the latter is the best solution, how to find any package with description and dependecies HAND Vlada - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republic e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] web:www.dinmont.cz NOTE: rm -rf /bin/lad

Re: udev problem

to the latest udev (unstable) and do an update-intramfs -u -t > (don't do option 1) and reboot. > > John Hi, John many thanks for your help. I followed option 1 and everything now is OK. HAND Vlada - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Repub

Re: thunderbird

faster too. But one thing I miss: clicking on a URL and have it opened in mozilla. Now you have to copy link address and go to mozilla yourself and paste it. Ot am I wrong? Thanks! H -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubs

strcoll, C, ru_RU.KOI8-R

d be appreciated. In both locales minus-dash is sure preceding any letter, e.g., strcoll returns <0 if called with "-" as first arg, and any letter as the second. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Mutt & 2 accounts

On Sun, Nov 27, 2005 at 12:58:30PM -0500, [EMAIL PROTECTED] wrote: > On Sun, Nov 27, 2005 at 06:30:57PM +0200, Vladimir Zolotykh wrote: > > Thank you for helping me get Mutt working. > > > > Could you please give me some clue how to set up Mutt working with two > > diff

Re: Mutt & 2 accounts

On Sun, Nov 27, 2005 at 07:14:10PM +0200, Vladimir Zolotykh wrote: > account-hook imaps://[EMAIL PROTECTED] ... > account-hook imaps://[EMAIL PROTECTED] ... It must be account-hook imaps://[EMAIL PROTECTED] ... of course, sorry for mistake. -- Vladimir Zolotykh -- To UNSUB

Re: Mutt & 2 accounts

On Sun, Nov 27, 2005 at 05:53:35PM +0100, Elimar Riesebieter wrote: > On Sun, 27 Nov 2005 the mental interface of > Vladimir Zolotykh told: > > > Thank you for helping me get Mutt working. > > > > Could you please give me some clue how to set up Mutt working with two

Mutt & 2 accounts

imaps://[EMAIL PROTECTED] account-hook imaps://[EMAIL PROTECTED] However it appears that the first hook is working all the time. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Mutt and debian-user list

On Sun, Nov 27, 2005 at 04:59:13PM +0100, Elimar Riesebieter wrote: > On Sun, 27 Nov 2005 the mental interface of > Vladimir Zolotykh told: > > > Why Mutt wouldn't send messages to debian-user@lists.debian.org, > > do you know? I can send it with Mozilla Thunderbird

Test, ignore please

Test -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Mutt and debian-user list

know, I'd appreciate any clue. -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

A test, ignore please

This is a test. Can't handle mailing debian-user@lists.debian.org with Mutt, just trying... -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Make up Emacs and XKB

them is C-\), inside Emacs -- C-\. Trying as hard as I could, still I was unable to figure out is it possible or not to use _the same_ key combination for switching from Latin to KOI8 characters everywhere. Would you please suggest something? Using Debian Sarge Thanks in advnace -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

make up Emacs and xkb

them is C-\), inside Emacs -- C-\. Trying as hard as I could, still I was unable to figure out is it possible or not to use _the same_ key combination for switching from Latin to KOI8 characters everywhere. Would you please suggest something? Using Debian Sarge Thanks in advnace -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Patching source package?

ave to interfere after unpacking the .tar file but before the compilation process starts. How I can do that? Thanks in advance Vladimir -- Vladimir Zolotykh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

keyboard not working IN GNOME - second attempt

Vlada - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republic e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] web:www.dinmont.cz NOTE: rm -rf /bin/ladin Nedostavam a nerozesilam viry, protoze nepouzivam M$ Windows -BEGIN PGP SIGNATURE- Version: GnuPG v1

keyboard not working

someone give me a hint what to do, please? Vlada - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republic e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] web:www.dinmont.cz NOTE: rm -rf /bin/ladin Nedostavam a nerozesilam viry, protoze nepouzivam M$ Windows

Help!

Hi all! I (accidentally) select BIG group of packets in dselect and accept them, but not install. How can delete these packet, may be synchronize packets in dselect list marked as "must be installed" with currently installed packets? Sorry for my English... -- To UNSUBSCRIBE, email to [EMAIL

krusader strange behavior

g Tracking System - found nothing. Please, can someone give me a hint, what to do? Many thanks and all the best to the New Year Vlada - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republic e-mail: [EMAIL PROTECTED] ~[EMAIL PROTECTED] web:www.dinmont.cz NOTE: rm

Re: gDesklets -- Which Work?

he several | desklets I've tried have all complained about 'possible broken sensors.' | Does anyone know for certain which desklets actually work with debian | and Gnome 2.6? Thanks. | | Ed | | - -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republic

Re: FYI: Branden's Response to DPL Platform Question

ebian packages? -:)) Vlada -- Ing. Vladimir M. Kerka <[EMAIL PROTECTED]> signature.asc Description: This is a digitally signed message part

[Fwd: Re: Win4Linux for Debian?]

Sorry, I send the answer to Benjamin only, so I fwd it to the list Vlada -Forwarded Message- > From: Ing. Vladimir M. Kerka <[EMAIL PROTECTED]> > To: Benjamin Sher <[EMAIL PROTECTED]> > Subject: Re: Win4Linux for Debian? > Date: Sun, 15 Feb 2004 15:33:12 +0100 >

Re: Win4Linux for Debian?

e: > Dear friends: > > May I ask if Win4Linux works in Debian? If so, how well does it work? > > Thank you. > > Benjamin -- Ing. Vladimir M. Kerka Klukovicka 1530 155 00 Praha 5 - Stodulky Czech Republic e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] web:ww

  1   2   >