Hi
>
> Before you start messing around with new kernels, do yourself
> a favor and switch to Grub. Once you get it installed, it is
> much easier. Additionally, if you use symlinks like /vmlinuz
> and /vmlinuz.old and so on, you can point the symlinks at
> newly installed kernels and reboot wi
>
> Ditch that kernel and install another one, either kernel-image-2.2.20 or
> kernel-image-2.4.18-1-386|686|k6|k7|586. If you use 2.4.18, don't
> forget to configure lilo to use the initrd needed to boot that kernel.
> After booting with the new kernel, try again.
>
I tried 'ditching' that kern
Hi,
A newbie question:
# Is there a step by step instuctions on how to setup Sound ?
1) I did an apt-get install sndconfig.
When I run sndconfig, I get the following error:
""
You don't seem to be running a kernel with modular
? sound enabled. (soundcore.o was not found in the
? module
Hi,
If I want to swap the mount point and all it's content between /usr
and /home. What should I do ?
I realized that I made a mistake in the partition size between the two
and I would like to "swap"them. The disk space I originally intended
for /usr and /home needs to be swapped.
Thanks,
Rathon
esponses from many of you..
- Rathon
On Thu, 30 Dec 2004 21:32:07 -0800, Syed Huq <[EMAIL PROTECTED]> wrote:
> >
> > If you're lacking space in /usr, how is booting from a Sarge CD going to
> > help? Are you planning on
> > wiping/repartitioning/resizingpartitions
>
> If you're lacking space in /usr, how is booting from a Sarge CD going to
> help? Are you planning on
> wiping/repartitioning/resizingpartitions/reinstalling, or what?
>
Exactly yes. I just added a 2nd hard hard drive and I intend to wipe
it all out/re-parition/re-install from scratch. This 2
The ./install/floppy dir has some .img file.
I do not have a floppy drive.
So still not sure how to run the installer...
Isn;t there any type of a .bat file I could run to envoke the installer ?
- Rathon
On Fri, 31 Dec 2004 00:08:44 -0500, Joey Hess <[EMAIL PROTECTED]> wrote:
>
Hi,
I have downloaded the .iso image of Sarge CD#1. Even though I have set
the first boot device to boot from is my CD-Drive(in my BIOS setting).
It is not booting from CD-Drive.
I went to the ./install dir of this CD#1 and cannot see any files I
can run to make it boot from the CD-Drive or how t
> Then why do early verses in the Quran say that Jews and Christians
> (people of the Book) or OK and can continue practicing their
> religion and later say that they must be converted? That would
> seem like a contradiction to me.
>
The Quran considers Jews and Christians as people of the Book
>
> The Muslims believe in a conecpt of "nullification" (I forget the
> correct term) that essentially states that later verses in the Quran
> that contradict with earlier verses, contradict or "trump" the earlier
> verses. Read the book I mention above and you will see what I mean.
> The Quran d
Hi,
Question from a newbie. I am currently using 3.0r1(Woody) and would
like to move to Sarge soon. I had to use a specific xserver-mach4 for
my ATI card.
If I use Apt to do the upgrade to Sarge, do I need to re-do my xserver
or that piece remains as is.
Are there possible things that could brea
It Worked !!
Downloaded the xserver-mach4 using apt.
Last question, how do I toggle between the various resolution modes.
Right now, it's set to 640X480 and I want to toggle to the 1024X768
- Rathon
On Fri, 24 Dec 2004 21:07:52 -0500, David Mandelberg
<[EMAIL PROTECTED]> wrote:
>
Hi David,
> >
> > Then I changed to Depth of 8 and get this error:
> > (EE) xf86OpenSerial: Cannot open device /dev/input/mice, No such device
> > (EE) Generic Mouse: Cannot open input device
> > (EE) PreInit failed for input device "Generic Mouse".
> Try reconfiguring xserver-xfree86 and changing
Hi,
I am a newbie trying to get my Xserver working using Woody(3.0r1) and
ATI Mach64 Graphics card.
The general error is:
(EE) ATI(0): Depth 16 is not supported through this adapter
I had started with a Depth of 24 and got a Depth 24 is not supported
Then I changed to Depth of 8 and get this er
on CPU+DDR
Mem+MoBo, it is an expensive project.
- Rathon
On Wed, 01 Dec 2004 10:34:03 -0600, Hugo Vanwoerkom <[EMAIL PROTECTED]> wrote:
> Mark Par wrote:
> > On Tue, Nov 30, 2004 at 10:03:01AM -0800, Syed Huq wrote:
> >
> >>Can you pls tell me if the ASUS P
Unfortunately that link has a list of a few Motherboards only.
Absolutely no mention of ASUS. I am sure there are a lot of Linux
users with ASUS..
Thanks anyways,
Rathon
On Wed, 1 Dec 2004 17:04:50 +0800, Mark Par <[EMAIL PROTECTED]> wrote:
> On Tue, Nov 30, 2004 at 10:03:01AM -0800,
Hi,
Can you pls tell me if the ASUS P5P800 Motherboard would work with Debian ?
OR
Can you point me to a Motherboard Hardware listing that shows which
Motherboard's would work with Debian.
Thanks in advance,
Rathon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe
Hi,
(absolute Newbie to Linux):
Using Slink and trying to setup my eth0 for the first time. I am reading
the Ethernet-HOW-TO and have a few ques.
When I did dmesg | more, it did not show any eth'N' messages so my first
installation did not see the card.
I looked under /lib/modules/2.0.36/ and fo
Peter,
Did you mean EDA ?? What is EDI ??
Rathon.
[EMAIL PROTECTED] wrote:
Hi all:
Does anyone know of any EDI software which
runs under Debian or Linux.
Thanks
Peter
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] <
/dev/null
___
Yep, you are right, I am getting all these old messages all over
again.
Syed.
>
> Is it just me, or am I getting messages from two or three days ago again?
>
> --Evan, who swears he's seed the dir *. /s msg before...
> ---And the Gateway message... and others...
>
>
> --
> Unsubscribe? mail
Hi,
I am a first time user of Debian Linux and have the following questions.
I have read the 'Installing Debian Linux 2.0' documentation and tried
to download the files mentioned in section 6.1 from:
ftp://ftp.debian.org/debian/stable/disks-i386/current/
All the files are there except base14-1.b
I agree too. The volume of mail per day is a LOT ! I hope we
can do something about it.
Syed.
>
> Hello fellow users.
> The debian user lists are the most important source of
> information for debian users,
> especially in detailed problems. I believe we all agree to
> that.
> However the lists h
Hi,
Where can I buy a Debian T-shirt ??
Syed.
--
~ Syed B. Huq [EMAIL PROTECTED] ~
~ Interface Apps Engineer ~
~ National Semiconductor Corp. ~
~ Tel:(408)721-4874; Fax:(408)721-4785 ~
23 matches
Mail list logo
