On Thu, 6 May 2010, Merciadri Luca wrote:
Hi,
How can I know how much current goes through each USB port for its
related device(s)? Thanks.
Try lsusb -v
There will be a MaxPower listed for the device
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsu
On Thu, 4 Mar 2010, David Goodenough wrote:
hda: Host Protected Area detected.
^Icurrent capacity is 268435455 sectors (137438 MB)
^Inative capacity is 312581808 sectors (160041 MB)
Is this a PATA drive, and from there, has a jumper on the back for LBA48?
Mike
--
To UNSUBSCRIBE, email to d
On Wed, 3 Mar 2010, Bernard wrote:
Again I re-installed the old .mozilla-thunderbird directory, waiting for more
advices
Icedove has a 4gb folder size limit.. could you have hit that?
Mike
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Tro
On Thu, 21 May 2009, Boyd Stephen Smith Jr. wrote:
2. PCI-X
PCI-X, or PCI-E?
Mike
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Mon, 23 Jul 2007, Paul Johnson wrote:
If I can find where I filed them, I can send you copies of my traffic
tickets, all of them to date have been on a bicycle.
I zipped by a police officer doing radar once about ten years ago, doing
just over 60kph in a 50kph zone.. He didn't bother me, p
On Mon, 16 Apr 2007, Ron Johnson wrote:
3GB will hold 750 4MB songs.
Is the user interface so efficient that it's simple to work with
them? How do you remember what's in all those playlists?
It's decent enough, you can select by artist, album, songs, favorites,
genre, year, spoken word.. i
On Mon, 16 Apr 2007, Reid Priedhorsky wrote:
I would like to get an MP3 player to use with my Lenny box. My specs are
few but perhaps odd:
I have a Sandisk e140, with 1 gb onboard, and uses up to a 2GB SD-card in
the side. Shows up as two disks, no special software needed to copy mp3's
and
On Fri, 10 Nov 2006, Colin wrote:
I don't think Pentium D processors are suppose to have two cores. Some
of them have hyperthreading which can make then behave like they have
two cores.
The Pentium D (dual) has two physical cores smudged together on one die,
for a total of two cores.
The P
Disk label type: gpt
Grub cannot boot from a gpt type partition table, and MSDOS style cannot
handle over 2 TiB... I have a 15x300 array with the same problem, I ended
up putting a 128 meg CF card on a CF to IDE adapter, and using that as
/boot.
Now the machine boots with the help of LILO
On Tue, 6 Jun 2006, Marty Landman wrote:
194 Temperature_Celsius 0x0032 253 253 000Old_age Always 51
That's a bit on the warm side for a hard drive.. can you improve your
cooling when you replace this drive?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subjec
On Fri, 2 Jun 2006, Koos Meijering wrote:
I am trying to create on a nfs file server a partition with the size of
4TB every time after a reboot the system reports there is only a 2 TB
partition and an unused part of the disk.
I have a 15 x 300 array under ext3 on the 3ware 9550SX-16ML. You nee
On Mon, 8 May 2006, Piotr A. Dybczy?ski wrote:
It seems something is going wrong with DNS.
security.debian.org points to 0.0.0.0 !!
Saw this yesterday, appears to be working properly today.
Mike
On Thu, 25 Aug 2005, Henrique de Moraes Holschuh wrote:
That *still* won't give you USB 2.0 speeds. I have never seen a [EMAIL
PROTECTED]@$
pen-drive or mp3-player that did more than lie on that regard, they all
operate at ~10Mbit/s maximum, and that's for the very good ones. It is just
operat
On Fri, 9 Apr 2004, Roberto Sanchez wrote:
> it has been great. Extremeley quiet (I chose a 600 MHz fanless Eden CPU
Ding.
Cyrix Cpu, and like all cyrix's, low in performance(which is the whole
point of this cpu being low power) Memory bus is likely slow to go with
it.
> # hdparm -tT /dev/hda
On Fri, 26 Mar 2004, Pigeon wrote:
> Unfortunately they are all very decidedly asymmetrical and
> right-handed only.
Odd, I'm left handed, and I can't properly use a mouse in that hand.
However, the fact that anything I draw or trace with the righthand-using
mouse/trackball looks like a Kinderga
On Fri, 5 Mar 2004, Mike Dresser wrote:
> I'm sure I've done something wrong on both problems :)
Well, found the first problem.
Don't run setiathome while glxgears is running.
1800 fps now. Much more respectable.
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
On Fri, 5 Mar 2004, [iso-8859-1] Pål Dahle wrote:
> Hi all,
>
> I've got a Dell D600 laptop with a ATI Radeon Mobility 9000 M9 graphics
P4 2.53, Geforce4 MX 440(hey, i didn't want it, it was given to me at
work)
With DRI on Sid, i get around 175 fps.
Without DRI on Knoppix, i get around 350.
Bo
On Sun, 29 Feb 2004, Phillip Hofmeister wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> All,
>
> I am looking to install a Seagate Travan 10GB/20GB IDE Tape drive into a
> Debian box.
Your basic method listed in the rest of the email is the way to do it.
Keep in mind this tape drive
On Mon, 23 Feb 2004, Pigeon wrote:
> Dunno what they do now that ABS is common.
Do they still teach if you have a floor mounted automatic, to hit neutral
during a panic stop?
_big_ difference in stopping times at 30-40 mph and under.
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Mon, 23 Feb 2004, Pigeon wrote:
> The UK's Highway Code calculates stopping distances from the equation:
>
> d = v + 0.05(v^2)(d in feet, v in mph)
Scary numbers at my cars top speed of 160mph :)
(Something like a quarter mile)
Any equations for time? :P
--
To UNSUBSCRIBE, email to
On Mon, 23 Feb 2004, Pigeon wrote:
> It's a long time since I took my car test, and I had no problems with
> the emergency stop, but the examiner's instructions were "...without
> locking the wheels", so I'd guess any kind of lock would be a fail.
> Dunno what they do now that ABS is common.
Does
On Mon, 23 Feb 2004, Paul Johnson wrote:
> On Mon, Feb 23, 2004 at 11:48:12AM -0500, Mike Dresser wrote:
> > Then again, the traction control doesn't work worth a damn either :)
>
> I'd be surprised if that's the case. You can't expect too much from
> anythi
On Mon, 23 Feb 2004, Pigeon wrote:
> Yeah, I know... same here, despite the fact that an emergency stop is
> part of the UK driving test and locking the wheels is a fail.
How much of a lock is a lock? My car has ABS, but in extreme situtations
you can get it to slide a couple feet on dry pavemen
On Fri, 9 Jan 2004, Johann Koenig wrote:
> it is transferring. About 1-1.5 megabytes per second is good for a 100
> megabit link. If it is substantialy less, its probabyl running at 10
> megabits.
Well, on this P4 2.53ghz, i regularly see 10.5 meg per second from a
similar host, even the celeron
On Tue, 6 Jan 2004, Greg Norris wrote:
> Thanx for the info. After researching a number of KVMs from various
> companies, I've decided that the SwitchView USB 4-port looks the most
> promising. That beastie is on order, so I should know for sure in a
> few days. ;-)
Looks like Cybex became Avoc
On Tue, 6 Jan 2004, Greg Norris wrote:
> Can anyone recommend a good 4-port (or thereabout) KVM switch? I need
> one which can handle USB keyboard and mouse inputs, and it would be a
> plus (but definitely not required) if it can accommodate both USB and
> PS/2 outputs.
I know this is completely
On Tue, 6 Jan 2004, Kevin Boergens wrote:
> ROTFL!
> It has to be some kind of hoax..
Not at all, do a google search for acacia stream
I know of several porn webmasters that have had run ins with these people.
www.youmaybenext.com details a company that is doing something similar as
well.
--
On Tue, 16 Dec 2003, michelle wrote:
> Or is this perhaps from a keylogger secretly installed? If so, how could I
> detect it?
>
> Thank you.
Well, you could try booting off the rescue disks/cd's, and see what
happens.
Also, I'd try going into the bios setup screen, and see if there's disk
activ
Anyone else waiting for a list of passwords to go through? Had that
happen back a year or two ago with that virus that emailed your
documents(can't remember the name)
I thought of sending this person mail, along the lines of "Hi Mom!", and
seeing if it gets to d-u.
Mike
--
To UNSUBSCRIBE, emai
> Hopefully this will clearn up the routing issues for anyone else still
> having problems.
It's working here now from this host.
However, I'm still seeing it drop in the i-p-x.de addresses from a
cgocable.net address. It's working when it goes through the eurorings.net
network fine though.
ge-
On Mon, 8 Dec 2003, Andreas Schwarz wrote:
> Very fast from here (T-Online, Germany).
Hmm. Wonder if this is leftovers from the cable that was broken last
month?
It's weird, because the two hosts that could get through were over here in
North America.
Mike
--
To UNSUBSCRIBE, email to [EMAIL
Anyone know what is going on with www.backports.org?
I can get at it from a few rare hosts, but from most of the hosts I've
tried it simply times out. Traceroute reveals it dies in the
eurorings.net, and from another host i-p-x.de
I had to use google's cache to get a peek at the mirror listing i
On Fri, 28 Nov 2003, Ken Gilmour wrote:
> >ftp> dir
> >227 Entering Passive Mode (68,141,111,92,217,95)
> >ftp: connect: Connection refused
> >ftp>
> >ftp> dir
> >200 PORT command successful
> >226 Transfer complete.
> >ftp: 287 bytes received in 0.09Seconds 3.05Kbytes/sec.
> >ftp> bin
> >200 Typ
On Mon, 17 Nov 2003, M. Lee Wiltrout wrote:
> While talking with the folks at Hitachi, I realized that something was
> 'not right'! Requirements for RMA very different from any other
> manufacturer. Luckily, I had retained a box from a Maxtor drive that
> I will use to return the IBM. Do not kn
On Wed, 12 Nov 2003, BruceG wrote:
> 3. Move PCs to new building. This is just a short walk, so they could be
> carried.
> Insert floppy in drive to prevent failure. (is there a command to park
> the hard drive?). Move the PC, keyboard, monitor, cables and mouse.
Are you using 5.25" drives?!?
On Wed, 12 Nov 2003, Vikki Roemer wrote:
> *shrug* I'm having no problems with it, and no one else seems to either--
> people are going to my site and the server is sending data, and I haven't
> had any complaints from the group. Anybody else here having problems?
I just tried it here, because
On Mon, 3 Nov 2003, Rus Foster wrote:
> Hi All,
> Does anyone know of a nice way of being able to show a progress meter on
> copying a large file from one part of the disk to another. I tried scp
> localfile localfile2 but scp calls cp.
Ugly/weird/overkill way of doing it, but
rsync -P 3dmark200
On Wed, 29 Oct 2003, Marc Shapiro wrote:
> I opened this hotmail account specifically for posting to this list. This
> is my fourth post in 2 days. So far, no spam, including no SWEN. Could we
> finally be seein the end of this mess?
135 in 12 hours here, and it'll probably jump up now that I'
On Mon, 27 Oct 2003, stan wrote:
> I tried apt-cache search, and the Debian package search page, and I can't
> seem to find nslookup.
>
> I've got it on most of my "testingh" boxes, but the one I'm building at the
> moment doesn't have it.
Seems to be in dnsutils, according to packages.debian.org
On Thu, 23 Oct 2003, John Hasler wrote:
> Or "A virus was detected and removed from this message to you" followed
> by instructions on how to retrieve the virus and the "cleaned" Swen.
How about the ones that have something to the effect of "Scan engine
failure, unable to scan" that let you know
On Wed, 22 Oct 2003, Roberto Sanchez wrote:
> Can someone here who has a sourceforge account please let the admins
> know that the Crystalspace Wiki site has been cracked.
>
> http://crystal.sourceforge.net/phpwiki/index.php
>
I thought the whole point of a wiki was that anyone could edit it?
>F
On Mon, 20 Oct 2003, Tom wrote:
> For the blind, link to a CGI which generates the email as a WAV.
And the blind and deaf? ...
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Thu, 16 Oct 2003, Tim Broddin wrote:
> It's standard (straight, not crossed) twisted UTP...
>
> I thought this should be fine for 100 mbps?
Yes, but do you know it's been wired up properly, and isn't damaged in
some way?
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
On Wed, 15 Oct 2003, Tim Broddin wrote:
> it still gives me 90-100% packet loss. The 100 mbps indicator on the
> switch also stays on. I'm planning on buying a decent NIC for her this
> weekend but I'm still interested in what the problem could be...
>
> Any thoughts?
Start with checking the cabl
On Fri, 26 Sep 2003, Ron Johnson wrote:
> After getting hundreds of infections per day early in the week of
> 14-Sep, it seems to have radically tapered off:
Looks like it's slowing down a bit, only 280 copies here in the last 24
hours, compared to the 400 or so for the last couple days.
Still n
On Tue, 23 Sep 2003, Vivek Kumar wrote:
> Hi ,
> I was trying to get updates using apt-get and i got following error
> message:
>
> Failed to fetch
> http://http.us.debian.org/debian/dists/potato/main/binary-i386/Packages
> 404 Not Found
Likely wouldn't be any updates anyways, as potato support
On Wed, 17 Sep 2003, David Fokkema wrote:
> On Wed, 2003-09-17 at 20:39, Jaime Ash wrote:
>
> > Does anybody in this group have any clues?
>
> Yes. According to your logs, you have selected the nvidia driver, but
> that driver thinks there is no nvidia card in your pc. So, to be able to
> help you
On Fri, 12 Sep 2003, Mike Dresser wrote:
> I'll try running icewm-session instead of icewm right now, I'm surprised
> that icewmbg didn't work out of .xsession, when it used to.
Still doesn't work when calling icewm-session, the background problem was
reported in #2
On Thu, 11 Sep 2003, Hanspeter Roth wrote:
> You are probably running a version after 1.2.9.
> In some recent versions icewmbg must be run explicitly.
> In 1.2.13 there will be icewm-session which should be started
> instead of icewm.
Indeed, running 1.2.13pre1 now.
I'll try running icewm-sessio
Ideas why icewmbg isn't working anymore with this in my .xsession as of a
recent upgrade on unstable? I have to manually run it from an xterm now.
I kind of miss when icewmbg was part of icewm and didn't need to be
loaded separately too :P
.xsession is:
icewmbg &
exec icewm
--
To UNSUBSCRIBE
On Tue, 9 Sep 2003, JM Besnard wrote:
> Hi ,
>
> I need an *IDE* Raid controller to do mirroring (Raid1) with the following
> requirements:
>
> - easy to install and natively supported in Debian (ie, no external module to load
> from floppy
> and setup in initrd like with the Promise raids)
>
On Thu, 4 Sep 2003, Karl E. Jorgensen wrote:
> Once upon a time, a long, long time ago, in a faraway land (in the days
> of the teletype) not all terminals were capable of lower-case
> characters. The age of the punched cards, punched tape and when CRTs
> were merely "some new-fangled technology"
On Tue, 26 Aug 2003, Vineet Kumar wrote:
> --> Using this parameter will force the client to assume that the
> --> server is on the machine with the specified IP address and the
> --> NetBIOS name component of the resource being connected to will
> -->
On Mon, 25 Aug 2003, Joe Emenaker wrote:
> Is there some Debian tool that would let me specify an IP and a message
> and it would handle the delivery without making me bother with finding
> out the NetBIOS name, etc.?
It's not what you want, but this might work.
No comments on the legality of wh
On Tue, 19 Aug 2003, John Foster wrote:
> I have been at this for a while (since the early 90's) & I have yet to
> need to run any kind of defrag utility on any Linux distro.
> I did not see what is the reason for you considering this...but I
> strongly advise against it. If you are having some pr
On Mon, 18 Aug 2003, DePriest, Jason R. wrote:
> Like a moron, I requested a read-receipt with the last message I sent.
> Sorry!
>
> However, I did come across a 'defrag' command by doing this: apt-cache
> show defrag
>
> See if that will fix your problems or not. I've never used it, but it
> sup
I'm looking for a solution to backup a server that has about 40 gig a day
of daily backups. Too big for a DDS-4 tape, and DLT/AIT/etc are just too
expensive considering the alternatives available. The critical files are
already backed up onto tape, I'm looking to expand what is backed up to
the n
On Mon, 11 Aug 2003, Johann Koenig wrote:
> > Does anyone have any information or methods which might determine what
> > a"typical" computers power consumption might be?
Well, I found that when we moved to P4/CeleronP4 systems at the office
here, that our APC 280VA battery backups just aren't pow
On Mon, 11 Aug 2003, Nejko Zidarjev wrote:
>
> Just a few minutes ago I managed to issue a top command and it appears that I
> had (or have during the slowdowns) more than 1 (YES, you read well!)
> processes running. the numbers is decreasing as time passess to the overall
> 42-50, which is ki
On Mon, 11 Aug 2003 [EMAIL PROTECTED] wrote:
> It's now a good 10 degrees warmer than the rest of the house.
My own room stays at about 80, even in the winter. Most winters I have
the window open a crack to keep the temperature sane.
One computer, one 21" monitor and one 17" monitor.
Summers a
On Thu, 24 Jul 2003, Paul Johnson wrote:
> If it's running at 10Mbit, it will never be full duplex. If you're
> running at 100, then it could be full or half. If your network cables
> only have four leads connected, you're using 10.
Actually, you can have full duplex on 10BaseT.
100BaseT runs o
On Mon, 21 Jul 2003, Jeff Schaller wrote:
> Boy, reminds me of the old "useless use of cat" award... I always
> use:
I've got a bunch of those on the shelf here, anyone need one?
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTE
On Sun, 29 Jun 2003, Colin Watson wrote:
> On Fri, Jun 27, 2003 at 01:39:12PM -0400, alex wrote:
> > I'm getting a lot of junk mail that is addressed to this list. Am I
> > the only one getting this stuff?
>
> Spam filtering on Debian lists was temporarily broken recently.
And it shows how eff
On Wed, 25 Jun 2003 [EMAIL PROTECTED] wrote:
> If it's not the ncurses-devel package that is missing, what could it be?
>
> Regards,
apt-get install libncurses5-dev
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Thu, 12 Jun 2003, debian_newbie wrote:
> Sorry for taking so long to respond.
>
> Yes, Euphoria also does the same thing. Except it is even worse. Euphoria has an
> 18 second delay between jerks (movements). I also noticed that I have a lot of
> screensaver names listed but they don't work. So
On Sun, 22 Jun 2003, Jamin W. Collins wrote:
> It was fairly common in the early 80's for application source to be
> printed in a variety of magizines and to be shared between users. I'm
> not referring to pirated software, but rather Free software. I remember
> Commodore (yes Commodore) magazin
On Sun, 22 Jun 2003, Jeffrey L. Taylor wrote:
> The early 30GB Onstream required special, proprietary drivers. The
> later ones worked much better on Linux because the standard drivers
> worked.
I was using it under NT, and crashing the fileserver anytime i went to do
a backup.
>
> > Also, be w
On Sat, 21 Jun 2003, Bill Wohler wrote:
> Still looking for a Linux-compatible 30-80 GB tape drive that is most
> likely going to be USB.
>
> Has anyone used the Seagate Travan TapeStor 40 (STT6401U2-R) or the
> OnStream USB 30 or ADR2.60usb? I haven't heard anything Linux about
> the former, but
On Tue, 10 Jun 2003, Nori Heikkinen wrote:
> demonstrating well that it's really all a matter of personal
> preference, and that what works for some may be what's causing pain in
> others.
Indeed, if I use an "ergonomic" split keyboard I usually get wrist/arm
pains in about 15 minutes, but can ty
On Fri, 6 Jun 2003, cfactor wrote:
> Yup, done that as well. :p I'm really stumpted...
If you have ntp installed, it will use/steal/abuse ntp-simple's config
file and might cause the problem you're having.
I've ran into where removing either ntp/ntpdate or ntp-simple will blow
away the ntp.con
On Fri, 6 Jun 2003, Nori Heikkinen wrote:
> hey debian folk,
>
> i'd like your opinions/feedback about what kind of ergonomic setups
> you use at home and in the office. as i mentioned a couple of days
> ago, i've been issued a laptop at work, and i can barely use it for
> the wrist strain. i ca
On Tue, 27 May 2003, Pigeon wrote:
> Me, I run with the sides off the case and if I want an estimate of the
> CPU temp I stick my hand in and feel the heatsink.
How do you keep the pigeons out?
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Conta
On Fri, 4 Apr 2003 [EMAIL PROTECTED] wrote:
> Once you've scoped out the lm-sensors situation, go here for hints on
> building that kernel with kernel-package:
>
> http://newbiedoc.sourceforge.net/system/kernel-pkg.html
>
> Kevin
I eventally got bored enough to test out what a make-kpkg would do,
On Fri, 4 Apr 2003, Troy Arnold wrote:
> > Two:
> >
> > Is this ASUS P4B533 supported by the i2c/lmsensors found in Sid?
>
> As the README says, lm-sensors doesn't support /motherboards/, it supports
> /chips/. To find out for sure you'd need to look in your motherboard
Doh, wrong semantics on m
Two questions:
One:
How are you supposed to install the lm-sensors-source when you compile
your own kernels. the resulting file from make-kpkg modules_install
depends on kernel-image-2.4.20. I just --force-depends'd it in, I assume
that's not the proper way.
Two:
Is this ASUS P4B533 supported
On Sat, 29 Mar 2003, Joris Huizer wrote:
> Hello Mike Dresser,
>
> Thank you for your reply - though I'd want to check -
> is it this one you meant ?
> http://www.liteonit.com/english/new_p_e/english--p-rw482448.htm
>
> I'm asking because the support section only
On Sat, 29 Mar 2003, Joris Huizer wrote:
> Hello everybody,
>
> I have a simple question: which cd writer do you
> people recommend to buy for use with Debian (and
> windows 98) ?
I'm using a 48x lite-on that usually sells for 20-30 dollars after
rebates. Works just fine except that burn proof
On Tue, 18 Mar 2003, hina wrote:
> Do you want to continue? [Y/n] y
> Get:1 http://okki666.nerim.net ./ xchat-common 2.0.2.CVS20030317-1 [320kB]
This doesn't look like a debian package to me, so you need to report this
to whoever runs that unoffical debian package repository.
Mike
--
To UNSUB
On Sat, 15 Mar 2003, sean finney wrote:
> a ] share your entire xp drive (ew...), smbmount it onto the woody
> box, and then just rsync -a between two directories
your entire XP drive is shared anyways, you could smbmount it onto the
woody box using the C$ share and the admin login/password.
On Thu, 13 Mar 2003, csj wrote:
> In Windows I recall something called Direct Cable Connection that
> allowed you to link two computers thru the parallel port. The
> GNU/Linux version of this appears to be PLIP (which I tried and
> failed at many many moons ago).
>
> So, is there a more modern way
On Tue, 11 Mar 2003, Mike Dresser wrote:
> The 533-E has a highpoint raid controller onboard. Don't bother.
My mistake, it's a Promise MBFastTrack133. You'd think I would
know what's in my home machine, having to watch their bios take
30 seconds every time you reboot
On Tue, 11 Mar 2003, Bill Moseley wrote:
> Proably the wrong forum, but trying to build a new Debian imap server.
>
> After spending a few hours the last few days researching motherboards I
> went to the local stop to pick up an Asus P4B-533-E (which they said they
> had on the phone). Of course,
On 10 Mar 2003, Fraser Campbell wrote:
> For cases I love Antec. I recently built a system with the SX835II from
> Antec (see
> http://www.antec-inc.com/pro_details_enclosure.php?ProdID=80843). It is
> hard to tell if the PC is on despite the CPU fan, video GPU fan, dual
> fan power supply + 2 c
On 10 Mar 2003, Ron Johnson wrote:
> ?? RAID1 can only handle 1 failure also!!
Well, actually you could have a N>2 number of drives in your raid-1 setup.
It's rarely done, but still possible.
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Co
On Tue, 4 Mar 2003, Geir Oye wrote:
> Hello,
>
> Anyone on the list familiar with the use of Veritas backup software on
> Linux Debian 2.2.?
>
> The idea is to use Veritas backup software in conjunction with HP
> SureStore Dat 40x6. (for server backup)
> (Also interested in experience on other
On Tue, 4 Mar 2003, Mpiktas wrote:
> As far as I understand the default compiler for sid is gcc 3.2. Today I
> installed kernel-image-2.4.20-k7 from sid and cat /proc/version shows
>
> Linux version 2.4.20-k7 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002
> (Debian prerelease)) #1 Tue Jan 14 00:
On Mon, 3 Mar 2003, Willem-Jan Meijer wrote:
> Section "Device"
> Identifier "Generic Video Card"
> Driver "nv"
I believe the nv driver doesn't use acceleration.
Hopefully someone will kick me if I'm wrong.
You'll need to look into using the nvidia drivers
$ apt-cache
On Fri, 28 Feb 2003, Robert Storey wrote:
>[EMAIL PROTECTED]:~/temp$ tar -cvf target.tar * .?*
s close.
tar -cvf target.tar .
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Thu, 27 Feb 2003, Ed Lawson wrote:
> I have used one of the combo cards from Xircom in a laptop running
> Woody. I really like the card since cable and phone line plug in
> directly and it works well. I don't remember having to do anything to
> get it to work both as a modem and NIC under Woo
On Thu, 27 Feb 2003, Robert Storey wrote:
> Considering all the subdirectories in /home, it would probably be better to do this:
>
> chmod -R 700 /home/*
What if you don't want to make all files executable writable and readable
in everyone's directory?
--
To UNSUBSCRIBE, email to [EMAIL PRO
On Wed, 26 Feb 2003, nate wrote:
> I get cc'd or bcc'd on almost every post that someone replies to me, it
> would be nice if people didn't do that but it's not a big deal to me.
I prefer if people DO cc me, it's much easier to see that someone replied
to me, without having to remember what threa
On Wed, 26 Feb 2003, Phil wrote:
> >I think this should work, anyways :)
> >
> do I have to do this individually for each user? (all 120 of them) is
> there a way to do this in the skel directory in. the future
Well, set it for one user, and see if others can get
Supposing I had a .bkf file from a Win2000/XP backup, and wanted to be
able to extract files from it in Linux, how would I go about this?
Just looking at the file, it looks similar to a tar file, but of course
it's not.
Supposedly it's Veritas Backup Exec that is bundled with W2k.
I use smbtar t
On Mon, 24 Feb 2003, nate wrote:
> Maarten Vink said:
>
> > I totally agree with Russel; disk speed is probably the most important
> > limiting factor, not CPU speed or diskspace.
>
> my home server is a p3-800 1GB ram, dual 100GB WD special edition(8MB)
> drives in raid1, with spamassasin+sanitiz
On Mon, 24 Feb 2003, John Covici wrote:
> I was trying to do a sid upgrade and it keeps trying to give me the
> gcc 3.2 compiler, but I want to stay with the 2.95 -- the new ones
> are broke and don't compile kernels properly.
What problems are you having compiling the kernel under 3.2?
> Anyway
> Huh? Princess Mononoke isn't a Disney movie at all; it's a Japanese
> anime by Hayao Miyazaki, distributed in the USA by Miramax (at least,
> their logo is on the DVD, and Disney's isn't).
Guess who owns Miramax?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe".
On Fri, 21 Feb 2003, Nathan E Norman wrote:
> Actually, I never saw the original but I did see the response. That
> made me angry, very angry indeed.
http://www.angelfire.com/pa/lkmarvin/images/angry.wav
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Tro
On Thu, 20 Feb 2003, Robert L. Harris wrote:
> I'm being tasked to come up with a way to kick idle users off off
> systems. I've seen different ways of doing this in the past but haven't
> used them. What's your "prefered" methods? This will be for a large
> environment with a couple hundred us
On Thu, 20 Feb 2003, Alan Shutko wrote:
> Now make it so you can specify paper trays and resolution on the lpr
> command line
I'm a very simple person, If i need different paper, I go load it into the
manual feed, and 1200 fastres is all i ever use.
Point taken.
--
To UNSUBSCRIBE, email t
On Thu, 20 Feb 2003, Nathan E Norman wrote:
> I've got an HP 2100TN with a JetDirect card; I installed CUPS (the
> cupsys package), read the docs, and had fun. _Much_ easier than doing
> it with lpr/lprng.
from my /etc/printcap
lp|Generic HP2100 entry:\
:lp=:\
:rm=192.168.0.53:\
1 - 100 of 343 matches
Mail list logo
