Reco,
thanks for reply!
> rgrep core /etc/security/limits*
> Would be more correct. Files at /etc/security/limits.d/ can override
> limits.conf.
Indeed. Output of "rgrep core /etc/security/limits*" is following:
$ rgrep core /etc/security/limits*
/etc/security/limits.conf:#- core - lim
Hi,
how to disable all automatic core dumps upon the process termination
in Debian 9? As Debian does not seem to use systemd-coredump, then I
set the "kernel.core_pattern=|/bin/false" kernel configuration in
sysctl.conf and following pam_limits.so module configuration:
$ grep -w core /etc/securit
Hi,
looks like the culprit is a /etc/cron.daily/do-agent cron-job which
executes the /opt/digitalocean/do-agent/scripts/update.sh script which
includes following if statement:
if command -v apt-get 2&>/dev/null; then
apt-get -qq update -o
Dir::Etc::sourcelist="sources.list
> I did some further debugging and it is the
> /usr/lib/apt/apt.systemd.daily script executed by apt-daily systemd
> service unit which updates the package index from the sources:
I configured cron with one minute interval to log the output of "apt
policy" with a timestamp into a log file in order
> Looks like the "apt update" or equivalent ran by unattended-upgrades
> ignored the /etc/apt/sources.list file and used only
> /etc/apt/sources.list.d/digitalocean-agent.list as a source for
> repositories.
> What might cause this behavior?
I did some further debugging and it is the
/usr/lib/apt/
Hi,
in order to test unattended-upgrades I downgraded yesterday(4.06)
packages iceweasel, qemu-utils and thunderbird:
# # "apt list --upgradable" command below was executed on 4.06
# apt list --upgradable
Listing... Done
iceweasel/stable 60.7.0esr-1~deb9u1 all [upgradable from: 52.9.0esr-1~deb9u1
Dan,
> You could do the wrapper, or you could install nullmailer, which
> is an extremely simple MTA that always hands off mail to a
> relayhost (i.e. somebody else's problem).
I ended up with a following wrapper:
$ cat /usr/sbin/sendmail
#!/usr/bin/env bash
# As header fields are at the top of
Hi,
I have apt-listchanges installed and registered in apt system:
# apt-config dump | grep apt-listchanges
DPkg::Pre-Install-Pkgs:: "/usr/bin/apt-listchanges --apt || test $? -lt 10";
DPkg::Tools::Options::/usr/bin/apt-listchanges "";
DPkg::Tools::Options::/usr/bin/apt-listchanges::Version "2";
Hi Reco!
Thanks for reply! I changed from
/lib/systemd/system/networking.service.d/networking.service.conf to
/etc/systemd/system/networking.service.d/networking.service.conf.
> One can specify hostnames in netfilter rules. Trying to load such rules
> without a working resolver can lead to weird
Hi,
I have a /lib/systemd/system/networking.service.d/networking.service.conf
configuration file which specifies, that my custom iptables.service is
a requirement for networking.service:
# systemctl show networking -p Requires
Requires=system.slice iptables.service
#
Is there a better or more co
Hi David,
> You need to post your evidence, starting with your /etc/network/interfaces
> file. You say you're using ifup, so we can perhaps discount this paragraph:
>
>Currently, "source-directory" isn't supported by
>network-manager and guessnet.
>
> but we don't know whether you'
On Wed, Aug 22, 2018 at 2:02 AM Andy Smith wrote:
>
> Hi Martin,
>
> On Wed, Aug 22, 2018 at 01:06:32AM +0300, Martin T wrote:
> > In addition, "accept_ra" with a value of 2 should ensure that RA
> > messages are accepted even if forwarding for that interface is
On Thu, Aug 23, 2018 at 6:04 PM wrote:
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Thu, Aug 23, 2018 at 05:31:57PM +0300, Martin T wrote:
> > Hi!
> >
> > According to "man interfaces", the ifup brings the named interfaces up
> > in
Hi!
According to "man interfaces", the ifup brings the named interfaces up
in the order listed in /etc/network/interfaces file. However, what is
the order for files in /etc/network/interfaces.d/? Alphabetical, i.e
same as "ls -l /etc/network/interfaces.d/"?
thanks,
Martin
On Tue, Aug 21, 2018 at 1:23 AM Andy Smith wrote:
>
> Hi Martin,
>
> On Mon, Aug 20, 2018 at 03:58:36PM +0300, Martin T wrote:
> > On Mon, Aug 20, 2018 at 7:55 AM Andy Smith wrote:
> > > Back in 2011 this was a hard-won battle:
> > >
> > >
>
On Mon, Aug 20, 2018 at 7:55 AM Andy Smith wrote:
>
> Hi Martin,
>
> On Mon, Aug 20, 2018 at 05:12:56AM +0300, Martin T wrote:
> > According to "man interfaces" "accept_ra 1" makes interface to accept
> > IPv6 RA messages. "accept_ra 2&qu
Hi!
According to "man interfaces" "accept_ra 1" makes interface to accept
IPv6 RA messages. "accept_ra 2" does the same and in addition, it also
enables forwarding. What does the forwarding mean in this context? One
could think, that it modifies the /proc/sys/net/ipv6/conf/*/forwarding
file(s), bu
Hi,
sorry, my mistake. I had installed libstdc++6:amd64 version 6.3.0-16
from Debian testing.
regards,
Martin
On Thu, May 11, 2017 at 5:19 PM, Henrique de Moraes Holschuh
wrote:
> On Thu, 11 May 2017, Martin T wrote:
>> I need to install "openjdk-7-jre-headless:i386"
Hi,
I need to install "openjdk-7-jre-headless:i386" package in my amd64
Debian 8 system. However, it depends on "libstdc++6:i386" package
which seems to break my system:
# apt-cache depends libstdc++6:i386
libstdc++6:i386
Depends: gcc-4.9-base:i386
Depends: libc6:i386
Depends: libgcc1:i386
Hi,
today I noticed an interesting behavior where the PC NIC does not
discard a received Ethernet frame, although it is larger than MTU on
this NIC. For example, I made PC1[eth0] <-> [eth0]PC2 and PC1[eth0]
<-> [eth0]PC3 connections and set the MTU on PC1 eth0 interface to
9000 bytes and MTU on PC
On Mon, Dec 12, 2016 at 3:47 PM, Greg Wooledge wrote:
> On Mon, Dec 12, 2016 at 01:58:12PM +0200, Martin T wrote:
>> 1) pam_env.so sets the environmental variables seen in the output of
>> locale command based on configuration files(for example
>> /etc/default/locale) when u
Hi,
I read the "Configuring the System for Another Language" paragraph in
"The Debian Administrator's Handbook" and am I correct that
localization works in a way that:
1) pam_env.so sets the environmental variables seen in the output of
locale command based on configuration files(for example
/etc
Hi,
let's say that I need a package named "weechat"(version 1.6-1) from
Debian "testing":
# apt-get install -t testing weechat
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
binutils libc-bin libc-dev-bin
Ok, understood. Thank you!
Martin
On Thu, Dec 8, 2016 at 1:30 PM, Lisi Reisz wrote:
> On Thursday 08 December 2016 11:06:55 Martin T wrote:
>> One more question regarding Debian backports- is it a good practice to
>> prefer latest versions from backports(jessie-backports) by d
r than the versions in stable(jessie).
Or is it a better practice to cherry-pick packages from "jessie-backports"?
thanks,
Martin
On Wed, Dec 7, 2016 at 4:25 PM, maderios wrote:
> On 12/07/2016 12:45 AM, Martin T wrote:
>>
>> Hi,
>>
>> what are advantages of
, version 2.10.95-7 from "unstable" would get installed
because it is the highest version(checked with "dpkg
--compare-versions") from all three sources with priority 500.
Martin
On Thu, Dec 8, 2016 at 1:35 AM, Mark Fletcher wrote:
>
> On Thu, 8 Dec 2016 at 08:11,
s
default release is determined.
thanks,
Martin
On Thu, Dec 8, 2016 at 12:03 AM, maderios wrote:
> On 12/07/2016 07:26 PM, Martin T wrote:
>>
>> Hi,
>>
>> I read the apt_preferences man page and it says that "To configure the
>> default release in th
Hi,
I read the apt_preferences man page and it says that "To configure the
default release in the configuration file, use: APT::Default-Release
"stable";". While I have multiple distributions in sources.list
file(stable, testing, unstable, jessie-backports), then I don't have
the "Default-Release"
Understood. Thanks!
Martin
On Wed, Dec 7, 2016 at 4:07 PM, Mark Fletcher wrote:
> On Wed, Dec 07, 2016 at 03:25:17PM +0200, Martin T wrote:
>> Dan,
>>
>> > On the other hand, upgrade your webserver to a backports version,
>> > and the webserver has been comp
ckages which require some features which are provided only by
libraries available for "testing" and thus the package can not be
available via backports.
thanks,
Martin
On Wed, Dec 7, 2016 at 2:37 AM, Dan Ritter wrote:
> On Wed, Dec 07, 2016 at 01:45:45AM +0200, Martin T wrote:
>&g
Hi,
what are advantages of using Debian "backports"("jessie-backports" in
sources.list file) over "testing"("testing" in sources.list file)? As
I understand, "backports" does not have all the packages from
"testing". On the other hand, packages in "backports" are specially
recompiled for "stable"
Hi,
I would like to run a cron job which periodically checks if I have
upgradable packages. One way to do it is probably like this:
$ apt-get upgrade -s | grep -q "^0 upgraded"
In case exit code is >0, then there are upgradable packages. The
second solution I came up with is:
$ for package in $
i
/sys/module/usbcore/holders/ehci_pci
/lib/modules/3.16.0-4-amd64/kernel/drivers/usb/host/ehci-pci.ko
#
Any other ideas?
thanks,
Martin
On Fri, Nov 4, 2016 at 12:48 AM, Mark Fletcher wrote:
> On Thu, Nov 03, 2016 at 06:18:59PM +0200, Martin T wrote:
>> Hi,
>>
>> look
oframes (int)
parm: park:park setting; 1-3 back-to-back async packets (uint)
parm: ignore_oc:ignore bogus hardware overcurrent indications (bool)
#
Any ideas what might cause this issue?
thanks,
Martin
On Mon, Sep 19, 2016 at 4:47 PM, Martin T wrote:
> Hi,
>
>
Hi,
I made a fresh minimal(no desktop environment, open-source "radeon"
driver, CEDAR firmware, X and dwm) Debian 8.5 installation few days
ago. Since that I have had two occasions where all of the sudden USB
devices(USB keyboard and mouse) no longer work. I'm able to access my
PC over SSH(or use
In addition to symlinks to /etc/rc.d/ directories, insserv
adds a ":" line to /etc/init.d/.depend.start file. My
mistake was that I added ":" line to
/etc/init.d/.depend.start file.
regards,
Martin
On 8/9/14, Andrei POPESCU wrote:
> On Lu, 04 aug 14, 13:30:54, Martin T
On 8/27/15, David Wright wrote:
> Quoting Martin T (m4rtn...@gmail.com):
>> Hi,
>>
>> as far as I know, kept back packages in Debian are shown in case
>> package can not be upgraded with "apt-get upgrade" because upgrade
>> requires to install new pack
Hi,
as far as I know, kept back packages in Debian are shown in case
package can not be upgraded with "apt-get upgrade" because upgrade
requires to install new packages. Usually this can be fixed with
apt-get dist-upgrade because this will install new packages if needed.
Now for some reason "db5.
Hi,
I need to virtualize few dozen virtual-machines for production
environment under Debian host-machine. I like the KISS principle
provided by qemu with KVM support where each utility has its own
specific purpose. For example I set up the virtual switch with
ip/brctl utility or use single qemu ex
Don,
thanks for explaining this!
Martin
On Fri, Feb 13, 2015 at 7:20 PM, Don Armstrong wrote:
> On Fri, 13 Feb 2015, Martin T wrote:
>> apt-listchanges uses NEWS and changelog files in Debian packages. Are
>> NEWS and changelog files always or at list usually updated, i.e. i
Hi,
apt-listchanges uses NEWS and changelog files in Debian packages. Are
NEWS and changelog files always or at list usually updated, i.e. is it
safe to trust those?
thanks,
Martin
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Cont
gt; On Sun, 10 Aug 2014 04:40:05 +0300
> Martin T wrote:
>
>> Hi,
>>
>> according to wiki, Debian is supported on little-endian ARM
>> architecture. However, then wiki lists some sub-architectures which
>> are supported. For example iop32x, ixp4xx, kirkwood and ori
>> how compatible are drivers on ports for different CPU architectures,
>> e.g. I have a USB HSDPA modem which works great on Wheezy port for x86
>> architecture, but can I expect it to work on Wheezy port for ARM?
>
> If your ARM platform's USB driver works, then yes, you can expect the
> exact sa
Hi,
according to wiki, Debian is supported on little-endian ARM
architecture. However, then wiki lists some sub-architectures which
are supported. For example iop32x, ixp4xx, kirkwood and orion5x. Does
this mean that Debian ARM port works on fairly limited number of
sub-architectures? For example
Hi,
how compatible are drivers on ports for different CPU architectures,
e.g. I have a USB HSDPA modem which works great on Wheezy port for x86
architecture, but can I expect it to work on Wheezy port for ARM? Can
one expect the same options(modprobe parameters) for drivers on all
platforms? What
erface? Or is it a best practice just to allow everything
through the loopback interface like I did?
Martin
On Sat, Aug 9, 2014 at 6:33 AM, Tom H wrote:
> On Fri, Aug 8, 2014 at 11:47 AM, Martin T wrote:
>>
>> I moved the script from /etc/init.d to /etc/network directory and
>&
ter
(statd, 1, udp)." messages.
Last but not least, starting the /etc/init.d/nfs-common
script("/etc/init.d/nfs-common start") took few minutes to start even
if the OS is running.
regards,
Martin
On 8/4/14, Tom H wrote:
> On Mon, Aug 4, 2014 at 10:52 AM, Martin T wrote:
&g
On 8/4/14, Gary Dale wrote:
> On 04/08/14 11:04 AM, Martin T wrote:
>
> On 8/4/14, Gary Dale wrote:
>
>> On 04/08/14 06:30 AM, Martin T wrote:
>>> Hi,
>>>
>>> I played around with a LSB init script under Squeeze(init is from
>>> sysvin
Hi,
by "reloaded the machine" I meant that I executed the "reboot"
command. I did try with telinit, but at least on Squeeze this is just
a symlink to init:
# file /sbin/telinit
/sbin/telinit: symbolic link to `init'
#
regards,
Martin
On 8/4/14, Gary Dale wrote:
>
Hi,
I made a very simple bash script which loads the iptables
configuration from /etc/firewall.conf and /etc/firewall6.conf files:
# cat /etc/init.d/firewall
#!/bin/bash
iptables-restore < /etc/firewall.conf
ip6tables-restore < /etc/firewall6.conf
#
Script is stored in /etc/init.d/ directory, b
Hi,
I played around with a LSB init script under Squeeze(init is from
sysvinit package version 2.88dsf-13.1+squeeze1) for learning purposes.
My script is following:
# cat /etc/init.d/test-script
#! /bin/sh
### BEGIN INIT INFO
# Provides: test
# Required-Start:$all
# Required-Stop:
Hi,
When I start an atftpd daemon with "/usr/sbin/atftpd --port 69
--bind-address 10.10.10.2 --daemon /srv/tftp/" command, the TFTP
server listens on ephimeral port(58418 in this example) instead of
port 69:
# atftpd --version
atftp-0.7 (server)
# /usr/sbin/atftpd --port 69 --bind-address 10.10.1
Hi,
thank you for the reply, but looks the mimic-tools1.0.1.deb
installation package has never been in official Debian repositories.
regards,
Martin
On Tue, Jul 29, 2014 at 12:10 AM, Andrei POPESCU
wrote:
> On Lu, 28 iul 14, 11:49:44, Martin T wrote:
>> Hi,
>>
>> aMSN
Hi,
aMSN(free open source MSN Messenger clone) allowed one to store
web-cam sessions, but saved those into cam files. There is an utility
called mimic2rgb which allows one to convert those cam files into RGB
video stream. At some point, there even were some Debian packages
around(mimic-tools1.0.1.
have 1.3MiB of free space- I guess it's because you
aligned your partitions on 8 sector boundaries and there was no need
to leave free space for alignment?
regards,
Martin
On Sun, May 11, 2014 at 6:30 PM, Sven Hartge wrote:
> Martin T wrote:
>
>> I see. Thanks! Are those &quo
he backup GPT stored?
regards,
Martin
On Sun, May 11, 2014 at 1:05 PM, Sven Hartge wrote:
> Martin T wrote:
>
>> 2) Am I correct that boot loaders use their code on this area after
>> the primary GPT and before the first partition?
>
> No.
>
> Bootloaders store t
Thank you for replies! As I understand, "xserver-xorg" will install
/usr/bin/X binary, which is a X Window Server itself and "xinit"
installs the /usr/bin/xinit utility which starts the X Window Server
and window manager(dwm in my case) as a X Windows Server client. As I
have Intel 945GM video card
Hi,
DebianInstaller shows "FREE SPACE" before the first partition and
after the last partition if GPT scheme is used:
http://i.imgur.com/qjNrdAx.jpg While there is nothing wrong with that
as there is indeed some free space before the first partition and
after the last partition(http://i.imgur.com/
Hi,
I installed Debian Wheezy with no desktop environment as I would like
to use lightweight dwm window manager instead. However, as a first
step, I need to install xserver. I would like to install minimal
components needed for running the xserver. What are the exact
components(binaries, libraries
lation, used? So far it seems
to be used only for completing the domain names.
regards,
Martin
On Sat, Mar 8, 2014 at 2:04 AM, Scott Ferguson
wrote:
> On 08/03/14 12:40, Martin T wrote:
>> Hi,
>>
>> during the installation of Debian, one is asked for "domain name&qu
Hi,
during the installation of Debian, one is asked for "domain name".
Only place where it seems to be used is for completing the FQDN's:
root@localhost:~# find / \( \( -path "/proc" -o -path "/sys" \) -a
-prune \) -o \( -type f -a -exec grep -iH "lab.net" {} \; \)
/var/log/installer/status:Maint
Hi,
I created a RAID1 array of two physical HDD's with chunk size of 64KiB
under Debian "wheezy". As a next step, I would like to create a
file-system(ext3 or ext4) to this RAID1 array using mke2fs utility.
Questions:
1) Should I use physical HDD sector size(512B in case of my HDD's) or file
syst
Hi,
there are multiple access control mechanisms for X server like access based
on host(xhost) or access based on cookie(xauth). Are both usually enabled
at the same time? If yes, then which one is checked first? Are both active?
I mean for example once I enable host with xhost, then do I need to
Hi,
lspci utility shows information regarding devices on various buses like PCI
or PCI Express. For example on IBM ThinkPad T42 laptop:
T42 ~ # lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller
(rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
le is
probably part of the RT2870F chip?
regards,
Martin
2013/1/2 Bob Proulx :
> Martin T wrote:
>> some Wi-Fi adapters(for example Intel ipw2200 family and many Ralink
>> cards) require both firmware and drivers in order to operate properly.
>
> Yes.
>
>> 1) As I under
Hello,
some Wi-Fi adapters(for example Intel ipw2200 family and many Ralink
cards) require both firmware and drivers in order to operate properly.
1) As I understand, firmware is usually a closed-source binary image
provided by Wi-Fi card manufacturer?
2) What happens with the firmware when card
Hello,
in order to wrap this hostname question up, then hostname set during
the Debian installation is:
1) mapped to an address from 127.0.0.0/8 range in /etc/hosts file.
Specifically to IPv4 address 127.0.1.1
2) written to MTA(for example exim4) configuration file
3) written to /etc/mailname
4)
Hi,
I'm trying to install debian-6.0.5-amd64-CD-1.iso from USB
memory-stick. The problem is, that Debian-Installer is not able to
"Detect and mount CD-ROM" during the installation process. The USB
memory-stick is a 2GB model containing MBR and FAT32 file system:
# fdisk -lu /dev/sdb
Disk /dev/sd
I was playing with dd "conv=noerror" option. It continues reading the
input file(for example HDD/SSD partition) even in case there are read
errors. Which errors are critical for integrity of ext[234] file
system? As I understand, Linux views the file system as a common set
of objects- superblock(ma
It's a well known fact that even most(with exceptions like ASR1K) of
the high-end Cisco or Juniper routers handle ICMP traffic in routing
engines not in ASIC's which means that they share the CPU time with
other processes. How prioritized is ICMP handling in modern Linux 2.6
and newer kernels? Is i
Stefan:
I'm afraid you can't use dd for this because as far as I know dd(1)
reads and writes one block at a time and in case new position for file
system overlaps with the present one, using dd you will start
overwriting the end of the file system with the readings from the
start of the file syste
n Sun, Mar 25, 2012 at 10:50:27PM +0000, Martin T wrote:
>> I have a 500GB((131072000*4096)/1024^3) ext3 filesystem:
>>
> [cut]
>>
>> Is it possible to make partition smaller starting from the beginning?
>> If yes, do I need to somehow start file system from the
I have a 500GB((131072000*4096)/1024^3) ext3 filesystem:
root@debian:~#dumpe2fs /dev/sda9 | egrep "Block count|Block size"
dumpe2fs 1.41.12 (17-May-2010)
Block count: 131072000
Block size: 4096
root@debian:~#
..on a 904GB((1953523711-56924160)*512)/(1024^3) partition(sd
21 kirjutas Tom H :
> On Sun, Feb 12, 2012 at 8:16 PM, Martin T wrote:
>
>
>> During Debian installation there is a question about "hostname" using
>> expert installation mode.
>
> In both modes but I don't think that "regular" mode asks you for a
During Debian installation there is a question about "hostname" using
expert installation mode.
Am I correct, that "hostname" inserted during Debian installation is
associated with a local(address from 127.0.0.0/8 range) IP address:
<
martin@martin-ThinkPad-T60:~$ hostname
martin-ThinkPad-T60
75 matches
Mail list logo
