Hi !
I have installed Debian 11 on my laptop. The computer has an intel
integrated graphics card and an Nvidia graphics card on board. Debian
has the nouveau driver. After installing the dedicated Nvidia driver, X
server shows an error, no xorg.conf. Is there any way under Debian 11 to
be abl
On Thu, Apr 23, 2020 at 04:57:03PM +0200, Marcin Owsiany wrote:
> TL;DR: My laptop starts ~20x slower than normal. Booting Debian hangs
> before the kernel starts. Windows 10 boots slow, but then works fine.
Many thanks to everyone who responded! As usual, one can count on the
Debian com
roblem (but why does it go away once Windows boots?)
- a botched CPU microcode update (but I suppose there are checksums which
would prevent it from happening, so not likely).
Any thoughts?
Marcin
W dniu 07.11.2017 o 14:11, Thomas Goirand pisze:
> On 11/05/2017 10:32 PM, Adrian Bunk wrote:
>> 20 years ago you could go into a shop and buy a mobile phone
>> with a CPU supported by the armel port in stretch.
> I didn't know Stretch was released 20 years ago. :)
Stretch maybe not. But ARMv4t w
Hello!
I'm starting to use Debian. Chosen testing for now to support my latest
hardware. I also need to install home wireless printer/scanner. I've found
drivers and application on manufacturer website (
http://www.canon.pl/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_s
2014-07-28 16:58 GMT+02:00 Marcin Owsiany :
> I'm running stable on an amd64 PC since wheezy release. Until recently, I
> was able to nicely suspend and resume the system by pressing the hardware
> "power" button on the chassis.
>
>
> After a recent update (not
n as the system completes the resume, it goes on and
continues with the shutdown and the machine powers off.
I'm using GNOME classic session.
How do I debug this? Where do I begin?
--
Marcin Owsiany http://marcin.owsiany.pl/
GnuPG: 1024D/60F41216 FE67 DA2D 0ACA FC5E 3F75 D6F6
Oczami inwestora JAK BUDOWAĆ?
Czy ta wiadomość jest wyświetlana poprawnie? Zobacz ją w przeglądarce (
http://alfa.grami-mail.pl/?sendpress=eyJpZCI6IjM3MTAiLCJyZXBvcnQiOiIxMyIsInVybElEIjoiMSIsInZpZXciOiJsaW5rIn0
).
Poradnik Jak Budować?
Ekologicznie Energooszczędnie Nowocześnie
Witam serdeczni
Jak budować?
Czy ta wiadomość jest wyświetlana poprawnie? Zobacz ją w przeglądarce (
http://t.firstmail.pl/w?sendpress=eyJpZCI6IjE2Nzg2IiwicmVwb3J0IjoiOSIsInVybElEIjoiMSIsInZpZXciOiJsaW5rIn0
).
Poradnik Jak Budować?
Ekologicznie Energooszczędnie Nowocześnie
Witam serdecznie,
Jestem autorem ks
Proszę o zgodę na przesłanie oferty kredytów firmowych również bez ZUS i US ,
kredytów indywidualnych oraz kredytów dla rolników
Marcin Kaczorowski
marcin.kaczorow...@firmowykredyt.com.pl
tel. 881 495 773
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of
Dnia 2013-01-31, o godz. 19:23:17
Brian napisał(a):
> On Thu 31 Jan 2013 at 19:39:08 +0100, Marcin Kłapkowski wrote:
>
> > XDM doesn't have choice for window manager, so only .xsession is my
> > choice.
>
> In
>
>/etc/X11/xdm/Xresources
>
&g
Dnia 2013-01-31, o godz. 19:46:07
berenger.mo...@neutralite.org napisał(a):
>
>
> Le 31.01.2013 19:39, Marcin Kłapkowski a écrit :
> > Hello,
> >
> > I have Debian wheezy. I use i3 window manager, starting with xdm on
> > tty7. I wanted to test other wi
Dnia 2013-01-31, o godz. 20:46:14
Andrei POPESCU napisał(a):
> On Jo, 31 ian 13, 19:39:08, Marcin Kłapkowski wrote:
> > Hello,
> >
> > I have Debian wheezy. I use i3 window manager, starting with xdm on
> > tty7. I wanted to test other window managers without changi
Hello,
I have Debian wheezy. I use i3 window manager, starting with xdm on
tty7. I wanted to test other window managers without changing my basic
config, and still using my desktop. Tried on tty6 with:
startx /usr/bin/awesome
it start nice, and it's working.
But when i switch to tty7 and back to t
Dnia 2013-01-21, o godz. 19:17:28
Lars Noodén napisał(a):
> On 01/21/2013 07:06 PM, Richard Owlett wrote:
> > Lars Noodén wrote:
> >> There's also the Mono problem with that program
> >
> > What is "Mono problem"? A Google search turns up lots of hits but
> > nothing informative.
>
> There's be
Hi
I have multiple computers systems running dual boot windows and windows.
One computers seems to have the problem, all running debian wheezy. 25%
of the time when I start the system and login to gnome the first thing I
notice the top internet connection icons says no connection. Then the
activ
Always two minutes with fsck check take it a few seconds longer. I can
send logs but which one can be helpful?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1339443
wrote:
> On Sunday 10 June 2012 22:29:03 Marcin Sławiński wrote:
> > But Ubuntu/Mint are
> > very quicker than Debian.
>
> That is not my experience! I have installed Debian Squeeze and LXDE for my
> husband on his desktop. It is very fast. Recently he had to use Ubunt
I installed Squeeze in august 2010, when squeeze was a testing distro.
Now after dist-upgrades I got Wheezy, so I am using testing distro.
There was time when I mixed repo from wheezy and squeeze so maybe that's
why is something wrong. People tell me this is low memory problem. But I
testing the sa
oaded gnome 3. On XFCE4 it's a little faster. But Ubuntu/Mint are
very quicker than Debian.
On Sun, 2012-06-10 at 20:58 +, Camaleón wrote:
> On Sun, 10 Jun 2012 19:55:51 +0200, Marcin Sławiński wrote:
>
> > What exactly Linux Debian with gnome 3 has hardware requirements to
>
Hi all.
What exactly Linux Debian with gnome 3 has hardware requirements to
works just fine without 2 minutes boot time and low responsible? How
much RAM must been installed (how fast? which technology : DDR, DDR or
DDR3) how GPU must be strong for Debian systems?
--
To UNSUBSCRIBE, email to de
I'm experiencing terrible bass distortion with ALSA.
I can mute the tone setting or lower the bass level to get rid
of it but then there is no bass which sucks almost
as much as the distortion itself.
thanks
ne - Konig electronic CMP-WEBCAM100
http://www.konigelectronic.com/en_us/55839440
but of course the manufacturer only mentions Windows.
regards,
--
Marcin Owsiany http://marcin.owsiany.pl/
GnuPG: 1024D/60F41216 FE67 DA2D 0ACA FC5E 3F75 D6F6 3A0D 8AA0 60F4 1216
--
To UNSUBSCRIBE
[ -f ~/.bashrc ]; then
. ~/.bashrc
fi
in your ~/.bash_profile
Cheers,
--
Marcin Rzepecki
m.rzepecki(at)iem.pw.edu.pl
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
es)
It's more correct to admit that cruft is incorrectly reporting things as
cruft, rather than Debian being full of of it. See e.g. #522108
--
Marcin Owsiany http://marcin.owsiany.pl/
GnuPG: 1024D/60F41216 FE67 DA2D 0ACA FC5E 3F75 D6F6 3A0D 8AA0 60F4 1216
--
To UNSUBSCRIBE, e
Javier Barroso pisze:
On Sun, Apr 12, 2009 at 6:32 PM, Elimar Riesebieter wrote:
* Marcin K?apkowski [090412 18:19 +0200]
Hi,
I have problems with wolfing disk space by apt. After I'm doing some
upgrades, I have a lot of apt archive files. When I do apt-get update,
or whatever
Hi,
I have problems with wolfing disk space by apt. After I'm doing some
upgrades, I have a lot of apt archive files. When I do apt-get update,
or whatever with apt, it gives me that results:
# du --max-depth 1 -h / | grep [0-9]G | sort -nr
3,0G var
2,5G var/cache
# du --max-depth 1 -h /
Florian Kulzer pisze:
On Sun, Apr 12, 2009 at 16:00:14 +0200, Marcin K�apkowski wrote:
Hi,
I would like to install soundtracker (it's one of the best tracker I've
heard and used before).
I'm using sid, and in repo there is version 0.6.8-2+b1 of soundtracker.
But
Hi,
I would like to install soundtracker (it's one of the best tracker I've
heard and used before).
I'm using sid, and in repo there is version 0.6.8-2+b1 of soundtracker.
But, I get missing dependencies:
# sudo apt-get install soundtracker
...
Następujące pakiety mają niespełnione zależności:
Thu, Mar 19, 2009 at 09:40:01PM +, T o n g wrote:
>
> $ apt-cache policy lm_sensors
> W: Unable to locate package lm_sensors
Hi,
try lm-sensors:
m...@vm01:~% aptitude search lm-sensors
i lm-sensors - utilities to read temperature/voltage/fan sensors
Cheers,
--
Marcin
Dnia 2009-03-18, o godz. 19:51:19
Marcin Kłapkowski napisał(a):
> I have problem with sound by flash when user acount is running,
> but when I run it on my account (normal user account, is ok).
I Installed
gstreamer0.10-alsa
gstreamer0.10-plugins-bad
and updated
gstreamer0.10-plugin
I have problem with sound by flash when user acount is running,
but when I run it on my account (normal user account, is ok).
Running by different user account
SWFDEC: ERROR: swfdec_codec_gst.c(211): swfdec_gst_decoder_init: failed
to create decoder SWFDEC: ERROR: swfdec_audio_decoder.c(232):
swfd
r just install 1.3.1 version.
Marcin Kłapkowski
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Dnia 2009-03-05, o godz. 09:27:02
Celejar napisał(a):
> On Thu, 5 Mar 2009 13:31:08 +0100
> Marcin Kłapkowski wrote:
>
> > Hi,
> >
> > Is there any good software to simulate neural networks? I didn't
> > find nothing in the repo.
>
> 'apt-cach
Hi,
Is there any good software to simulate neural networks? I didn't find
nothing in the repo.
Marcin Kłapkowski
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I found one of them: Session Manager. Works good.
thanks
martin3z
Dnia 2008-11-23, o godz. 12:22:33
"thveillon.debian" <[EMAIL PROTECTED]> napisał(a):
> Marcin Klapkowski wrote :
> > Hi,
> > I use Iceweasel and I want to save my opened sessions by session
> >
Hi,
I use Iceweasel and I want to save my opened sessions by session name.
1. Is it possible in Iceweasel?
2. Is there any web browser that can save many sessions with opened
tabs?
3. Is there some wish list or something in Debian community?
thanks
martin3z
--
To UNSUBSCRIBE, email to [EMAIL
*.=debug;*.=info;\
*.=notice;*.=warn |/dev/xconsole
Thanks for help or any ideas.
Marcin Kłapkowski
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi, is there any way to specify relative path on the remote ssh account
in the /etc/apt/sources.list file?
Currently I've only managed to make it working with specifying absolute
path.
Thanks,
m.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Conta
Try and install kernel for BIGSMP more than 8CPU's in system. I've the
same problem with Intel Harwitch 16CPU's.
Regards,
Marcin
- Wiadomosc oryginalna -
*Od:* "Damon L. Chesser" <[EMAIL PROTECTED]>
*Do:* "Lestat V." <[EMAIL PROTECTED]&
On Mon, Oct 29, 2007 at 12:13:37AM +0100, Andraz Sraka wrote:
> On Sun, 2007-10-28 at 10:49 +0000, Marcin Owsiany wrote:
> > afaapps_2.6-3_i386.deb from http://www.brandl.net/pe2550/ works for me
> > on the etch kernel. Also, the kernel logs any problems that appear, so
> >
use/install and are any kernel patches required? It would be
> nice to see raid status as also the faulty disks :)
afaapps_2.6-3_i386.deb from http://www.brandl.net/pe2550/ works for me
on the etch kernel. Also, the kernel logs any problems that appear, so
logcheck will do for healh monitorin
Hi,
Has anyone had any success using Compaq R1500H UPS with Debian?
Information on the internet suggests that you can connect it to the
computer using a serial cable, but I cannot find any information about
management software for Linux for this UPS..
thanks,
--
Marcin Owsiany <[EM
Friday 16 of March 2007 11:28:28 Daniel Wyeth napisał(a):
> On Thu, 2007-03-15 at 22:27 +0100, Marcin Giedz wrote:
Thanks everyone for these hints
After I read your posts and did some googling this pop in my mind:
1) install RHEL - as small as possible
2) install ALL needed modules -
dedicated for EMC PowerPath? I mean I'd like to use BINARY version
of this kernel with all external modules which come with EMC and prepare
debian-installer with such kernel.
Has anyone tried something like this ever?
Regards,
Marcin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a su
sible? How kernel/module (e1000) calculates interface
number and what can cause such "disorder"?
Regards,
Marcin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
st. Dropping to a shell!"
I checked in /dev/ and there was no "ram" entry but "ram{0-9}".
What I did wrong? How can I fix it?
Best regards,
Marcin
ARISE
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ter that.
Does anyone have a clue on what might be happening?
Marcin
--
Marcin Owsiany <[EMAIL PROTECTED]> http://marcin.owsiany.pl/
GnuPG: 1024D/60F41216 FE67 DA2D 0ACA FC5E 3F75 D6F6 3A0D 8AA0 60F4 1216
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsu
Dear Debian users,
Please forgive me asking such trivial question:
I have machine which doesn't have floppy nor cd but only usb port
instead. I would like to install debian sarge. I recorded cd image and
tried to use usb-cdrom, however sarge installer doesn't want to mount
cd. Is it somehow po
-i801', I2C address 0x51
Chip `Serial EEPROM (PC-100 DIMM)' (confidence: 8)
But does not find any thermal sensors. Has anyone had more luck with
such hardware? The manual says the sensors are managed by Heceta chip
U5F10, for which google finds no good hits.
Marcin
--
Marcin
On Thu, 12 Feb 2004 04:56:03 +0200
Micha Feigin <[EMAIL PROTECTED]> wrote:
(...)
> 3. The mach64 drm kernel module (in the src package). Take note that this
(...)
I've made a patch for 2.6.2:
http://rainbow.mimuw.edu.pl/~mb197846/patch-2.6.2-mach64.diff.bz2
if somebody would need it.
Works very
On Thu, 12 Feb 2004 04:56:03 +0200
Micha Feigin <[EMAIL PROTECTED]> wrote:
(...)
> 3. The mach64 drm kernel module (in the src package). Take note that this
(...)
I've made a patch for 2.6.2:
http://rainbow.mimuw.edu.pl/~mb197846/patch-2.6.2-mach64.diff.bz2
if somebody would need it.
Works very
e for download (megaraid.o). The source is
included, so probablu it the same as in stock kernel, but could anyone
confirm this?
regards
Marcin
--
Marcin Owsiany <[EMAIL PROTECTED]> http://marcin.owsiany.pl/
GnuPG: 1024D/60F41216 FE67 DA2D 0ACA FC5E 3F75 D6F6 3A0D 8AA0 60F4 12
Hi,
On Fri, 7 Nov 2003, [EMAIL PROTECTED] wrote:
> I reinstalled my Sid box few days ago and switched from sawfish to metacity
> and from iso... to utf-8 locales. Now I can't run root-portal, that I used
> to use for watch what was happening down inside. Is there any other tool for
> watching logf
Hello again,
Here's an update (although I doubt anyone's that interested): hashing
out glx module is a quick fix to the problem.
Regards,
--
"Only wimps use tape backup: _real_ men just upload their
important stuff on ftp, and let the rest of the world mirror
it ;)" (L.B.T.)
--
To UNSUBS
Hello,
Has anyone experienced any problems with the nvidia module and recent
X upgrades to 4.2.1-13 under kernel 2.6.0-test9? The symptoms here are:
xinit stops with a fatal server error just after initializing GL
extensions and the screen gets quite dim - ttyNs still work but aren't
'refreshed'
On Tue, 1 Jul 2003 00:17:44 +
Robin Gerard <[EMAIL PROTECTED]> wrote:
(...)
> Why to use Qt rather Gtk ?
> --
> Gerard
Read the output of 'make help'. And then try 'make gconfig' (you'll need gtk2.0).
I haven't tried it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "u
On Sun, 22 Jun 2003 11:56:23 +0200
"JZidar" <[EMAIL PROTECTED]> wrote:
> I'm building a small system for working at home. I would be like to watch
> some movies sometimes but I don't know if that's enough:
> - Pentium II 266 MHz
> - 196 Megs of ram
> - graphic card Geforce2 MX
Should be sufficien
are crashes reported
there,
> the radeon driver breaks pretty often for some days.
Thanks Nicos and Michel,
Disabling dri has done the trick. BTW, I'm not that familiar with dri. What
functionality have I lost by disabling it?
Marcin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
x-session-manager or whatever session
is chosen, and never emerges from it.
I include the bottom part of XFree86.0.log, as the whole file is a bit long.
I would appreciate any help. Please CC me in the message, as I'm not
subscribed to the list.
Marcin
/var/log/XFree86.0.log:
--
n was to turn off
transparency (a panel to blame was a 'detached' panel at the top with
2 running applets: a clock and workspace 'switcher').
Regards,
--
=== Marcin Fusinski - [EMAIL PROTECTED] ===
+ Glogow MASTERnet SETI User Group +
/dev/null - it'
instance of nautilus to not respawn?
The command switches of 'nautilus desktop', which is the sole reason (I
believe...) nautilus respawns. Try executing it through ALT+F2 or
whatever shortcut you've assigned to the 'run' dialogue.
Regards,
--
=== Marcin Fusinski - [EMAIL
own. I'm not certain though because I haven't
> been able to tell Gnome that nautilus processes shouldn't be respawned.
You might be able to switch those nautilus processes with:
gconftool-2 --type=bool --set /apps/nautilus/preferences/show_desktop false
Regards,
--
=== Marcin
rror I usually upgrade
from is a few hours behind, so I might encounter probs with gconf2 tomorrow...
Regards,
--
=== Marcin Fusinski - [EMAIL PROTECTED] ===
+ Glogow MASTERnet SETI User Group +
/dev/null - it's fantastic
--
To UNSUBSCRIBE, email to [EMAIL PROTECT
nnot help you - I wish I could... but I can verify
that nautilus in unstable became 'really unstable' after the recent
upgrade (try clicking a few times while browsing files...). In fact it's
hardly usable now.
I hope the bugs will be fixed soon (although I haven't seen your
specifi
pre10) - or any other I have ever tried - worked
just fine...
Regards,
--
=== Marcin Fusinski - [EMAIL PROTECTED] ===
+ Glogow MASTERnet SETI User Group +
/dev/null - it's fantastic
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubs
e.
AFAIR the module works just fine - at least I had no problems with it on
Asus A7V333 mobo.
Regards,
--
=== Marcin Fusinski - [EMAIL PROTECTED] ===
+ Glogow MASTERnet SETI User Group +
/dev/null - it's fantastic
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Greetings!
On Thu, 5 Dec 2002, Troy Alexander wrote:
> It is a PS/2 Mouse and I am using imps/2 in the
> XF86Config-4 file.
Have you tried other protocols? I use ExplorerPS/2 with my optical
mouse (4 buttons, 2 wheels, cheapo A4tech stuff) - works very well.
Good luck.
--
=== Marcin Fu
tall routine...
Seems like we'll have to wait tull 2.4.21.
> It only affects "journal" mode. If you use the default ("ordered")
> mode
> you're safe.
I know, that's what I meant when I wrote 'limited'.
> I suspect 2.4.21 won't be fa
Greetings!
Is Debian package kernel-source-2.4.20 affected by the (limited) ext3
data corruption bug or had it been fixed/patched (optimisation of
data-ordered inodes only) before the package was released?
Thanks.
--
=== Marcin Fusinski - [EMAIL PROTECTED] ===
+ Glogow MASTERnet SETI User
it's really unusual to not have ldconfig on debian, it comes with libc6
location of ldconfig is not in your path
do this
export PATH=$PATH:/sbin
dpkg -i whatever.deb
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Tuomo Karhu [mailto:[
I'm no expert in that field but I think gimp uses libungif to open gif files
to save the file as gif you have to use compression which is also patented
and I don't really see a point of having uncompressed gif.
I belive the library was created to help migrate from gif to png.
Marci
it's all about our great friends from wehavethewayout.com - UNISYS
they hold a patent for GIF. I belive there is a package called gimp-nonfree
which provides gif support
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Daniel D Jones [m
hey used to ;]
Thanks anyway!
> Cheers & Good Luck!
Hope my warranty isn't void yet :]
Regards,
--
Marcin Fusinski qrchaque(at)master(dot)pl
UIN: 127801366 GG: 1854531
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Greetings!
I forgot to add that CDRW burns just fine (readable) CDs - the only
porblem is with mounting...
If anyone knows what causes those probs, please let me know. Thanks.
Regards,
--
Marcin Fusinski qrchaque(at)master(dot)pl
UIN: 127801366 GG: 1854531
--
To UNSUBSCRIBE
different CDs to exclude medium error, still
same thing happens.
Thanks for any comments/suggestions.
Regards,
--
Marcin Fusinski qrchaque(at)master(dot)pl
UIN: 127801366 GG: 1854531
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Troubl
Hello!
Sorry about replying to my own posts, but changing a PCI slot helped...
Anyway I suppose it shouldn't have happened in the first place. Anyone
has a clue why it acutally did? Or if there's a way to change/fix it
without PCI slot swapping?
Regards,
--
Marcin Fusinski qrchaque
u10k1/emu10k1.o failed
/lib/modules/2.4.18/kernel/drivers/sound/emu10k1/emu10k1.o: insmod
emu10k1 failed
What can be done about it? Can I assign IRQ to a PCI device 'by hand'?
If so how?
Can anyone help? Thanks in advance :]
Regards,
--
Marcin Fusinski qrchaque(at)master(dot)pl
UI
are you running PDC somewhere?
did you try to change user passwd with smbpasswd?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Brian W. Carver [mailto:[EMAIL PROTECTED]
Sent: Monday, April 15, 2002 2:34 PM
To: debian-user
Subject: Re: Samba
transfer the
license than buy the license directly from RSA.
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Holger Rauch [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 09, 2002 10:00 AM
To: debian-user@lists.debian.org
Subject: Re: Woody: Apache SSL
present, the -a argument is
ignored.
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Patrick Kirk [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 09, 2002 9:24 AM
To: debuser
Subject: Allow a user to shutdown
Hi all,
I want my son to be able to
shutdown -h now will halt the system not reboot it,
you need
shutdown -r now
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Karsten M. Self [mailto:[EMAIL PROTECTED]
Sent: Monday, April 08, 2002 12:19 PM
To: Debian User List
Subject: Re
hough, now people can actually listen to the
whole cd,
not only the one song the radio plays 24 times/24h, and then decide if they
want to
spend $15, $20 or whatever.
btw, you can return almost anything if you don't like it, this rule should
apply to
software and music cds too.
Marcin Kurc
C
well, since they say it does not play on PC/MAC you can always put it in
a HP, Sun (insert your favorite one) box and if it doesn't play complain :)
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Dave Steinberg [mailto:[EMAIL PROTECTED]
/etc/mysql/my.cnf
comment out
skip-networking
/etc/init.d/mysql restart
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Matthew Daubenspeck [mailto:[EMAIL PROTECTED]
Sent: Monday, March 25, 2002 1:28 PM
To: debian-user@lists.debian.org
?uid??(uid=cc4f4)
require valid-user
same process applies to groups
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: axacheng [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 20, 2002 4:04 AM
To: debian-user@lists.debian.org
Subject: A openldap que
How would you not have a libc installed on your system? :)
check the version you are running
dpkg -l |grep libc6
you probably have to upgrade your libc6
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Pac [mailto:[EMAIL PROTECTED]
Sent: Monday
what model?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, March 18, 2002 9:05 AM
To: Debian User Mailing List
Subject: linux on IBM PS/1
Hi!
We recieved a few IBM PS/1 machines in
t doesn't happen all the time and the tmp file gets cleared
anyways.
Any thoughts?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
Hi,
it appears that for some reason php4-4.1.2-1 doesn't keep session
variables or does not start session (session_start()).
Is it known problem or am I missing something?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
My mistake, I was thinking about some iges to vrml converter
-Original Message-
From: Kurc, Marcin A. [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 14, 2002 9:11 AM
To: 'debian-user'
Subject: iges2tiff, jpeg ...
Hi,
does anyone know a tool (not Linux CAD packages) that wil
Hi,
does anyone know a tool (not Linux CAD packages) that will
convert IGES files to jpeg or tiff?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
add the following to your lilo.conf
append = "console=ttyS0,9600"
or whatever port you connecting to
then just run minicom
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Bodnyk, Bruce W [mailto:[EMAIL PROTECTED]
Sent: Monday, Marc
Did you have any other box connected to your cable modem before you
connected that box? (or different NIC)
Did you try to cycle power on your modem?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Stephen Nosal [mailto:[EMAIL PROTECTED]
Sent
get_value('telephoneNumber');
push(@result, "$mail\t$name\t$telephone");
}
}
print "LDAP query: found ", scalar(@result), "\n";
print join "\n", @result;
exit 1 if
http://bugzilla.ximian.com/
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: user list [mailto:[EMAIL PROTECTED]
Sent: Friday, March 01, 2002 12:04 PM
To: [EMAIL PROTECTED]
Cc: Johan van der Walt; debian-user@lists.debian.org
Subject: Why Debian
is your nameserver a legitimate name server for that domain?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Sebastiaan [mailto:[EMAIL PROTECTED]
Sent: Friday, March 01, 2002 11:00 AM
To: debian-user@lists.debian.org
Subject: www forward with
being ported to Linux faster
because of computation power needs where Beowulf cluster would fit
really nice. I know there is a few companies working on it right now,
but it takes time.
If you are really interested in porting some software to Linux go visit
www.platform.com and let them know.
Do you run DNS at all?
or are your NT boxes using WINS?
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Vineet Kumar [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 28, 2002 11:34 AM
To: debian-user@lists.debian.org
Subject: Re: Unable to
Sure does
check -g option, incremental ...
Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive
-Original Message-
From: Raffaele Sandrini [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 27, 2002 2:02 PM
To: debian-user@lists.debian.org
Subject: backup with tar
Hi
I
1 - 100 of 334 matches
Mail list logo
