Re: Problem to burn cd with cdrecord

"Markus Jaekel" <[EMAIL PROTECTED]> writes: > Hallo! > > After creating an ISO-Image with mkisofs I would like > to burn it on CDR. I start a test with > cdrecord dev=6,0 speed=4 -v -dummy -multi image.iso > without any errors. > > When I do it without the -dummy option I get the following out

Re: compiling an old kernel

thanks to all who answered my question. I have installed gcc272 and could compile the kernel; Hubert

compiling an old kernel

As I explained in another message I am getting SCSI errors when writing a CD; I have tried to use this CD writer under windows: it works; so I suppose it may be a driver problem (I use a 2.2.13 kernel). So I am trying to compile an old kernel (2.0.38) but with there are problems with egcs. I have

Re: problem writing CDs

[EMAIL PROTECTED] writes: > Did you change blank type? I have tried with the same blanks that worked; still error > Could be software. Did you update cdrecord between it writing and it not > writing? yes I will try with an old cdrecord. I also updated the kernel so this could be a driver error;

problem writing CDs

I used to write CDs with cdrecord without problem; but now almost every time I try to write a CD it ends with a SCSI error: cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 0

Re: errors when printing with samba

Peter Iannarelli <[EMAIL PROTECTED]> writes: > Hello: > > What I find amazing about M$95/98 is that if you turn off > the screen saver, many problems disappear. thanks for your answer, Peter, but I had already tried that; the screen saver is disabled; Hubert

errors when printing with samba

I have already sent this message to the list but I don't know if it has arrived because of problems with my subscription address, so I resend it: I have a debian machine with an epson 900 printer; I use samba to print from another machine with windows98; here is the problem: when printing a lar

printing with samba

I have a debian machine with an epson 900 printer; I use samba to print from another machine with windows98; here is the problem: when printing a large job (e.g. an A4 photo at 1440dpi) I get an error somewhere in the middle: a file begins to arrive in /tmp and at a random time the transfers sto

printing with samba

I have a debian machine with an epson 900 printer; I use samba to print from another machine with windows98; here is the problem: when printing a large job (e.g. an A4 photo at 1440dpi) I get an error somewhere in the middle: a file begins to arrive in /tmp and at a random time the transfers sto

Re: Hamm-->Slink, now fetchmail/exim behaves strangely

Graham Ashton <[EMAIL PROTECTED]> writes: > On Tuesday 02 March, Mark Phillips wrote: > > > I've just upgraded from Hamm to Slink. Fetchmail seems to work the > > same as before, except that now, only the first 10 messages get to my > > mail box straight away. > > I've got the same problem. Str

Re: CD recorder problem

"Daniel J. Brosemer" <[EMAIL PROTECTED]> writes: > On 23 Feb 1999 [EMAIL PROTECTED] wrote: > > cdwrite is not as full-featured as cdrecord. Unless you have a special > reason to use cdwrite, I suggest > cdrecord -v -dummy -xa2 dev=3,0 speed=2 cdimage.raw >^ >

CD recorder problem

I have a CD recorder (Philips 2x2x6) and when I try to write a CD with cdwrite -v -D /dev/sr0 cdimage.raw I get cdwrite 2.0 Track 01: data7 Mb opening scsi device: Read-only file system At boot the CD recorder is detected: Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.0

emacs and pgnus

I am trying to use pgnus-0.75 and I have the following problem: it compiles fine (./configure and make) but when I use it I get the error void function: gnus-truncate-string the problem is that there is no function named gnus-truncate-string in pgnus; so I think it may be loaded before I start gn

Re: Slow mail delivery

r them at once; in the log file there is: no immediate delivery: more than 10 messages received in one connection this is controled by some exim options (see queue_only_load) Hubert Fauque

some applications are eating memory

I have noticed that some applications are growing without limits: the first one is netscape; I have limited in Preferences the size of the memory cache to 3 Mb but as I use it, it takes more and more memory (as reported by top); I have to kill it when it is too big ( the maxmimum I have had till n

amaya

I have tried to use amaya but it doesn't work; when I open an html document it just put the title and the document appears blank; I can't write anything and sometimes it prints thot error thanks for helping me Hubert [EMAIL PROTECTED]

Re: X-Windows Question

Fulgham, Brent/SCO wrote: > I get the dread: > _X11TransSocketUNIXConnect: Can't connect: errno=111 > xinit: Connection refused (errno 111) unable to connect to X > try xhost in your .xsession Hubert [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubs

Re: floppy boot problem

>Hubert FAUQUE wrote: >> >> I tried to make a boot floppy by copying the kernel on the floppy: >> cp /usr/src/linux/arch/i386/boot/zImage /dev/fd0 >> it works except that when I boot from the floppy my Adaptec 1542 >> isn't recognized at boot; when I boot

floppy boot problem

I tried to make a boot floppy by copying the kernel on the floppy: cp /usr/src/linux/arch/i386/boot/zImage /dev/fd0 it works except that when I boot from the floppy my Adaptec 1542 isn't recognized at boot; when I boot with the same kernel from the hard disk the 1542 is recognized without problems;

Re: Dosemu + FDOS problem

exits. > >Some solution to this problem? > >Thanks in advance. > >Alexander Gieg > I have tried dosemu and I have the same problem; Does anybody have an idea? Thanks in advance Hubert Fauque [EMAIL PROTECTED]

Re: where is wish ?

On Fri, 16 Aug 1996 11:46:42 -0700, you wrote: >You need to install Tcl7.4 (or Tcl7.5) and Tk4.0 (or Tk4.1). >BTW, if you just need the make 'xconfig' feature, I suggest not installing >all this and using 'make menuconfig'. > >Phil. > Thanks for your answer, I had just tried make xconfig instead o

where is wish ?

I have tried make xconfig to generate a new config file for the kernel but it gives an error wish not found Could somebody tell me what is wish and in which package it is? thanks Hubert Fauque [EMAIL PROTECTED]

Re: unreliable service of I-Connect

one about the 15th) and I have received them two weeks later in each case, so I am glad to say I am very pleased with i-connect. Hubert Fauque [EMAIL PROTECTED]