I just used NDISWrapper to get a netgear wg111v2 fob to wifi...
I have only done this with the 2.6 kernel, never 2.4.
I also indicate the rev's I used, you may find different revisions.
Get the source
ndiswrapper.sourceforge.net
sourceforge.net/projects/ndiswrapper/
cd /usr/local/src
mkdir ndi
d is no longer produced making it a pain for wide spread production.
>Further more I tried the 2.6 kernel and the machine just went nuts only
>because the SATA drives are suddenly seen as SCSI. Yes it is fixable but I'd
>rather not customize it too far off the beaten path.
>
>
&g
Vandoorn, Yvo;
I have never done that. I know that with the 2.6 kernel (that I have on
many laptops) plug a usb device in and an icon appears on the desktop for it.
Do you want the script to autorun whe the usb device is pluged in? If so
do some googles on "auto run", there are some programs you
Roberto;
>Setting up a print server is as simple as setting up CUPS and telling it
>to listen on all interfaces (not just 127.0.0.1). You just setup CUPS
AHthat is the trick. Thanks
>on the client(s) to point to the host at port 631 (which the port over
>which CUPS listens).
Thanks for th
Folks;
Has anyone set up a Printer Server with Debian OR know of a how-to? I
searched some yesterday and did not find a how-two.
Or is it as simple as just selecting that at the right point in the install.
I will be trying that later today or tomorrow.
TANX in advance
Craig
--
To UNSUBSCRIBE,
Just this AM I put ETCH on a Dell Dim. 4100 and no X.
YIKES.
I did an apt-get install xserver-xorg xutils x-windows-system-core
and I had 640x480
in /etc/X11/xorg.config I added my monitor's HorizSync and VertRrefresh and I
was at my max res.
If this helps anyone, great.
Craig
--
To UNSUBSCRI
I have a Win2k box and three Debian boxes (2.4x1 2.6x2) on an IOGear
Miniview Micro 4 port KVM and it works great.
It uses a three key stroke Ctrl, then Alt, then Shift to switch. It took a
while to get the right timing but now it switches w/o a prolblem.
I use the same at home again with 2.6 ker
Michael;
Thanks for the heads up on that. I missed the fact that this was a
laptop...AND I just built a new box with a P4.
Yes, a P4 would make smoores very nicely!!
>> You don't want the processor fan to stop...at least I would never want fan
>> on top of the processor of ANY compuer I used to s
You don't want the processor fan to stop...at least I would never want fan
on top of the processor of ANY compuer I used to stop.
At 03:20 PM 4/6/2006 +0200, Ivan Glushkov wrote:
>Hi all,
>since few hours my processor fan does not want to stop, and the
>temperature if my Centrino is 45 degrees.
I have insured there is limited activity and no users on the machine and
pulled the main HDD out. ONLY do this if the HDD's are hot-swapable.
It is the roughest test you can do on a RAID system. BUT if it fails over
to the second drive; test one passes.
IF after some time passes and activity make
Ah so its getting personel then is it!!
At 10:18 AM 3/30/2006 -0800, Andrew Sackville-West wrote:
>On Thu, 30 Mar 2006 08:12:41 -0500 (EST)
>[EMAIL PROTECTED] wrote:
>
>> That would really depend on the size and the feel.
>> There is aa point of diminishing returns for both.
>and here---^^ is the
>I could make an off-color come-back, but I won't...
Your talking about those yellow instead of read watermelon's, right?!?!?!?
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Tro
I am stuck using a 2.4 kernel. I think that is part of the problem.
At 11:59 AM 3/22/2006 -0600, Hugo Vanwoerkom wrote:
>Craig M. Houck wrote:
>> Folks;
>>
>> I have a call into Dell support so if I get anything from them I will
>> report it hereBUT.
>>
&
Folks;
I have a call into Dell support so if I get anything from them I will
report it hereBUT.
I want to monitor cpu temp, fan speed, voltage etc. all the readings that
one finds on a properly sensored mobo. The PE1850 I am using has a Xeon
processor which I understood to have all that built
Hmmm.
This is 'good' bad news. Same thing happening to me I though I had done
somehting else wrong.
I am using a Dell desktop that has a twin next to it running Sarge and the
sou nd works fine.
At 11:31 AM 3/20/2006 -0500, Robert Harris wrote:
>
>No sound other than speaker beeps (^G) though.
Installed Etch testing beta 2 yesterday, very pleased so far.
Install might have been faster than sarge. Some improvements to the
installer too.
Once installed the reboot time seem must faster than sarge.
XF86 support much improved found every resolution for the monitor and
started at the max re
David;
I asked one of the senior admins here about this as much for me as you.
First the application's daemon (bacula-fd) needs to be compiled with
tcpwrapper so it will look at hosts.allow file.
Second the host or IP range you are 'allowing' must be know. Unlike, ftp,
httpd, etc it canNOT be dyna
You need to get the source and compile it.
A not difficult task.
I have it running on a classroom lab full of Debian boxes.
At 01:36 PM 3/13/2006 +0800, Chong Zan Kai wrote:
>Hi,
>
>May I know where can I download the latest Netbeans 5.0 (Debian Package)??
>
>Thanks a lot.
>--
>Best Regards,
>Ch
Hey;
What is any easy to use program to generate thumbnails from a 'full sized'
image?
I have tried many programs found using apt-cache search BUT either I am to
stoopid to figure them out or they really don't do what I want.
Fore xample:
convert image.JPG -resize 10% images.jpg complains.
THA
>My problems are,
>
>1. The video display will only let me use up to 800x600 size whereas the
>same monitor under WinXP would work at 1024x768. So how would I go about
>correctly setting this in the base config?
You need to get the Horizontial scan rate and Vertical refresh rate for
your monitor
Shlomi;
> Sorry for my ignorance :)
No apologize needed, this list exists to help users.
>But what is a megaraid2? And how do you supply it's drivers on
>installation time to the installer? (if you can)
In the case of the Dell PE1850 I did not need to supply the driver. Debian
'found' it. Me
I don't think that 2.6 does support RAID.
I just installed sarge 2.4 on a controller using Megaraid2 driver AND the
2.6 install failed when it tried to find the HDD's.
The 2.4 kernel installed w/o a problem.
At 04:04 PM 2/28/2006 +0200, Shlomi Levi wrote:
>Hi, I just purchased a new MB w/RAID ena
I am using a Dell raid controller on a PE1850 that has a create interface
for changing things AND it will tell you if what you are about to do is
going to destory data.
Oh yes, running Debian 2.4.x
At 07:03 PM 2/27/2006 +0100, Jan Johansson wrote:
>Is "RAID Reconfiguration Tool" ( http://unthoug
Here is what I did to get a netgear to work perfectly with ndiwrapper
NdisWrapper
NdisWrapper will use Native Windows Drivers (.INF) on/under/for/with Linux
I have only done this with the 2.6 kernel, never 2.4.
I also indicate the rev's I used, you may find different revisions.
1 Get the sou
Your battery she is deceased and no more.
The good news is one can be had for not to much.
I find on eBay from 1.47 (44 shipping) to about $80 I didn't chekc the
shipping)
for a thinkpad T20 battery.
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBS
David;
This may not be the case, BUT there are several m/b's (I have an older abit
BX6 rev) that I understand can cause the pc clock to be skew under Win98.
It does with the box I built. Could be a similar effect.
>Every few days, I find my clock two hours fast. Easy enough to reset but ...
>w
I just used NDISWrapper to get a netgear wg111v2 fob to wifi...
I have only done this with the 2.6 kernel, never 2.4.
I also indicate the rev's I used, you may find different revisions.
Get the source
ndiswrapper.sourceforge.net
sourceforge.net/projects/ndiswrapper/
cd /usr/local/src
mkdir ndi
--
>> In order to get to work I had to go
>> into the CMOS/BIOS and change the HDD to Combination.
>
>After you did that, what were the SATA drive(s) in /dev?
The drive was id'd as hda not as a SCSI.
I think I saw a scheme where you fool the system into thinking the SATA are
SCSI to get them
Alessandro Pluchino
YES.
Sarge has problems doing SATA installs.
I had to put it on 30 Dell machines. In order to get to work I had to go
into the CMOS/BIOS and change the HDD to Combination. Not sure what that
means exactly there was very little explanation there. I suspect it makes
it act less li
D-kewl.
I made honest selections regarding the last few builds with Debian I have
done AND it selected Debian.
I think of the Debian installer as at least a semi-GUI interface, but I
guess it isn't!
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCR
Merry Christmas,
Happy Hanukkah,
Faithful Kwanza,
Sweet Solstices
& a Fine Festavus
Remember the Reason for the Season
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble?
Louie;
Hmm. I usually run kshell, so this might not be correct.
You need a then after the first if.
you need [[ ]] not just one bracket.
At 03:23 PM 12/1/2005 +0800, Louie Miranda wrote:
>Im having troubles on my shell script. When i run it, im having this errors.
>
>
>
>
>
>./runXML3.sh: line
Sorry in advance.
Not a 'pure' Debian solution BUT one bsed on Debian. ClusterKnoppix will
auto sense multi-processors.
http://bofh.be/clusterknoppix/
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
I have a debian sarge box on an older DELL Dimension 4100. I had screen
problems until I built the machine attached to the KVM using the shared
Monitor.
I also had the H and V sync.
(A knoppix linux 3.8.2 live-cd provided that at boot/configure time)
>I currently have the following setup at home.
Matt;
>I'm going to Demo the Sun Fire v20z next week, if you want sarge-on
>-sun opteron info, follow up w/me later.
An experience with Debian on a Sunblade 100? I have the netinstall Cd for
SPARC and it goes as far as to say it is loading LINUX and hangs!!
>
RbtBotL
Craig - ><>
oBU Sys
I have a similar problem.
Try ctrl-alt-F2 (if it will let you go to a terminal) then
ctrl-alt-F7 to go back.
this wakes my mouse when it freezes.
At 08:59 AM 10/21/2005 +0200, Emmanuel Quevillon wrote:
>Hi,
>
>I run a Debian 3.1 (Sarge) on a Dell latitude D810. Everything went fine
>when I instal
Here. here.
I quite agree in particular with #3.
Repair, Refinish, Rebuild and Reuse. I'm suspect there are a few more Re's.
And when something is truly I mean truly at EoL. Its bonfire time
(excluding stuff that produces toxins when heated). OK sometimes that stuff
too if the fire will be big enou
All of those machines will run some sort of linux, maybe a scaled down
version but sothing.
I'd get a KVM to share the boxes bwtween on Keyboard, Mouse and Monitor.
Several are avaliable wiht cables for around $50US.
There is a website has has directions for making old.old.old boxes into
linksys li
You are likly getting back a line from ps -ef that is infact the process of
the grep looking for sshd.
I had a similar problem like this once.
Trap just the grep sshd part and see if the grep isn't included.
make that line read ...
AANTAL=`ps -ef | /bin/grep '/usr/sbin/sshd' | /bin/grep -v grep
A rescue disk will gain access to the HD from what ever you have in the box.
There is a quasi-Debian rescue disk at:
http://rescuecd.sourceforge.net/
At 09:15 AM 10/10/2005 -0700, Scott Denlinger wrote:
>Hi all,
>
>I'm running Debian testing, and my processor recently died. I used this as an
>oppo
Opportunistic port scans of port 22 to see if there are openings will not
'see' yours.
SO you become exempt from that potential intrusion. It is a deterrent, but
a really easy one to set up.
Here is a sad fact, at least in Murry's Little Book O'Facts.
There are NO SECURE COMPUTERS. Just ones that
Wh are you compiling gcc.
Why not simply load the debian (.deb) package for gcc?
IFor that matter, I thinkg gcc is part of a standard SARGE install.
Am I missing something here??
At 03:55 PM 10/3/2005 +0200, mess-mate wrote:
>Hi,
>anyone compiled gcc without the 'pch' errors ?? (precompiled head
At 01:41 PM 9/20/2005 -0400, Angelo Bertolli wrote:
>Craig M. Houck wrote:
>
>>The more I think about this the more I think using car batteries for this
>>is a tad dangerous, sealed, old-school with caps, no spill batteries, etc
>>no matter the type/style. Chemically created e
The more I think about this the more I think using car batteries for this
is a tad dangerous, sealed, old-school with caps, no spill batteries, etc
no matter the type/style. Chemically created energy in a thin walled box is
not to be played with, particularly when it sits ideal a lot. When in a car
the redirection will work for sure.
Try
xdebconfigurator -x | more
as well and of course
xdebconfigurator -x | less
for the less fans
At 08:03 PM 9/19/2005 +0200, Louis Woods wrote:
>I have just installed xdebconfigurator to get some clues about some of
>the hardware in my laptop. When I ru
I have put debian on two think pads a T20 and a new one. I also put it on a
Dell 6000? Sound isn't working on the 6000, but I think it is a hardware
problem.
>
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
NIS/NFS (that is nis not nis+ btw)
At 06:09 AM 8/30/2005 -0500, Hugo Vanwoerkom wrote:
>Antonio Rodriguez wrote:
>> I plan to implement a system similar to a cybercafe, the basic being
>> the following:
>>
>> <> A central server.
>> <> Several end points with terminals, keyboards (no sound), wit
Tony;
I'd try something with sed like ...
in a shell or perl or what ever loop getting filenames
mv $filename /tmp/$$.tmp
cat /tmp/$$.tmp |sed "s/false/passswd" >$filename
end loop
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCRIBE, email to
alien
RbtBotL
Craig - ><>
oBU SysAdmin
/|\ 607 777 6827
^ Tot Ziens
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I think w/o 111 and 113 you can't authenticate users to login to the
machine. Of course that also makes it very secure.
980 is in the unassigned range and should not be in use, check that out. 4sure
>>
>>rpcbind 111
>>
>>auth 113
>>
>>unknown 980?
netstat -tulpn
Go into your /etc
A suer should be able to type quota -v to get that.
Adding that to the shell's login would show them each time a user
logged/terminaled in.
At 04:42 PM 8/22/2005 +0200, [EMAIL PROTECTED] wrote:
>Hello,
>
>I went through the quota-mini-howto to install quota on out system. It
>seems to work but I
We are using NIS/NFS to allow uses to login to a Debian desktop machine
that connects them to there Sun Solaris work space. We would like to direct
the many .dot files that are written to be directed to a sub-directory to
stop any interferance with pre-existing/duplicated files that are created
du
52 matches
Mail list logo
