Hi,
I want to modify the default Etch kernel-2.6.18-3-SMP by
adding the option highmem > 4 GB. In the default kernel,
this option is disabled. So, my idea was to download the
original kernel sources from kernel.org for the same version.
Then, get the config file from /boot of the Etch kernel and
Hi,
I've a system with 6 GB RAM, two AMD Opteron
CPUs and an S-ATA HD. Will these components run under
a default Debian Sarge. If so, where can I check that
both CPUs are running? Will /proc/cpuinfo provide
appropriate information?
Regards,
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Hi,
I've a system with 6 GB RAM, two AMD Opteron
CPUs and an S-ATA HD. Will these components run under
a default Debian Sarge. If so, where can I check that
both CPUs are running? Will /proc/cpuinfo provide
appropriate information?
Regards,
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Hi,
I plan to set up a Windows terminal server. In order
to easily backup the entire Windows system, I plan to install
Debian Sarge as base system, then VMWare and in VMWare
the Windows OS.
Will I get a decreased speed performance in the VMWare
Windows or will the Microsoft OS run approximately
>>
> The man page says:
>> Note that the colour depth may also be limited by the server configuration.
>>
>
> I suspect the problem may be on the server end of things, but I'm unsure
> how you'd configure that.
What I forgot to mention. On another machine running Solaris, I can
run rdesktop
Hi,
I'm running rdesktop v1.3.0 on my Debian Sarge box.
When I try to connect to a Windows XP system, this
works fine with "rdesktop WINPC". However, when I specify
the color depth with "rdesktop -a 16 WINPC", the connection
is not established but I get the rdesktop usage message.
What is wrong?
Hi,
I run Sarge on my laptop. The "Fn" buttons don't work. I think
that there are some kernel options that I have to enable.
(Or is this a problem of the X server?)
Can I add the additional kernel options as modules without
rebuilding my current kernel? If so, how does it work?
Thank you.
Chris
Hi,
in the Woody I used mkraid to initialize an RAID1 array.
In Etch, mkraid is missing. Has it been moved to another package
or do I have to use another tool to create RAID arrays?
Regards,
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
On Thu, 19 Oct 2006 16:00:14 +0200, Jeff Zhang wrote:
> Christian Christmann wrote:
>> Hi,
>>
>> in my fresh Sarge installation, OpenOffice 1.1 does not offers
>> my CUPS printers. The only option in the OpenOffice printer setup
>> is "Generic Printer"
Hi,
in my fresh Sarge installation, OpenOffice 1.1 does not offers
my CUPS printers. The only option in the OpenOffice printer setup
is "Generic Printer".
CUPS is configured and works fine with KDE applications. I've added
the CUPS server hostname in /etc/kde3/kdeprintrc.
Where do I set up the p
Hi,
I've a Debian machine with a sound card. I can play
mp3 with libOSS.so. When I connect to this machine with
ssh from another machine (it's a Sun terminal) with X
forwarding, I can start xmms and it also starts playing
the mp3. However, the sound is not forwarded to my
headphones connected to
Hi,
I've an older laptop that does not allow to boot from
CD-ROM but from FDD, HDD and LAN.
What is the easiest way to install Debian on that device?
Thank you.
Regards,
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I'm trying to install the fglrx driver for my
ATI card on my Etch system with Xorg 7.
After installing the packages
module-assistant, fglrx-driver and fglrx-kernel-src
and running 'aticonfig --initial' the fglrx driver
seem not to work:
notebook:/usr/lib# fglrxinfo
display: :0.0 screen: 0
O
On Sun, 08 Oct 2006 17:00:15 +0200, Florian Kulzer wrote:
>
> I think these messages indicate that there is something wrong with the
> setup of your X (the basic graphical environment infrastructure which is
> needed by all GUI applications). Updating from Sarge to Etch means going
> from XFree8
On Sun, 08 Oct 2006 17:00:15 +0200, Florian Kulzer wrote:
> One of your problems seems to be that you have debconf configured to use
> the KDE frontend, which means that it will not be able to ask you any
> configuration questions if KDE is not running. If you cannot get KDE to
> work then you sho
Hi,
after installing a fresh Sarge system, I wanted to upgrade
to Etch. However, the installation of package ttf-opensymbol
fails with the error message:
debconf: unable to initialize frontend: KDE
debconf: (Can't locate Debconf/FrontEnd/KDE.pm in @INC (@INC contains:
/etc/perl /usr/local/lib/p
Hi,
I want to use gmake on my Etch system since it's
required by a script.
On another machine running Suse, the application is installed
under /usr/bin/gmake. Are there any official Debian
packaged with "gmake".
If not, what could I do to make 'gmake' available?
Regards,
Chris
--
To UNSUBSC
Hi,
I'm trying to configure sshd (OpenSSH_3.8.1p1) in a way that passwords
are not required for ssh logins.
This is my /etc/sshd_config file:
Port 22
Protocol 2
HostKey /etc/ssh/ssh_host_key
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
ServerKeyBits 768
LoginGraceTime 60
Hi,
on my Sarge system I want to use automounter (autofs).
After adding the mount points and the config files to /etc/auto.master,
creating the config files ( I tool the existing auto.home and replaced
the corresponding mount point names) for each mount point and restarting
autofs everything works
Hi,
on my Debian system the RAID discs are partitioned like that:
/dev/md1 9.2G 8.2G 593M 94% /
tmpfs 252M 16K 252M 1% /dev/shm
/dev/md3 37G 33G 2.5G 94% /usr
/dev/md0 92M 31M 57M 36% /boot
...
How can I determine where th
<[EMAIL PROTECTED]> schrieb im Newsbeitrag
news:[EMAIL PROTECTED]
> On Wed, Jul 19, 2006 at 09:51:32PM +0200, Christian Christmann wrote:
>> Hi,
>>
>> after an update of my Etch system yesterday, I can't connect to the
>> internet
>> properly via my D
"Pol Hallen" <[EMAIL PROTECTED]> schrieb im Newsbeitrag
news:[EMAIL PROTECTED]
>> Any ideas what's wrong and how to solve this problem?
> try to ping a numeric ip (google.com has address 64.233.167.99)
No, pinging IP's does not work either.
>
> check the route tables too
route -n:
84.60.0.1
Hi,
after an update of my Etch system yesterday, I can't connect to the internet
properly via my DSL connection.
After running pppoeconf and entering my user data and password and
then connect to my provider with "pon dsl-provider", with ifconfig I can
see that my ppp0 has a dynamic IP address. W
Hi,
smartd generates permanently the following e-mail (sent to root) on my
Debian Etch system:
---
Subject: SMART error (OfflineUncorrectableSector) detected on host: server
Date: Sun, 7 May 2006 12:33:22 +0200 (CEST)
This email was genera
> What did happen and how do I sove it ?
I had a similar problem couple of days ago after updating my
Etch system. In my case, some modules were not more loaded
automatically. I had to do it by hand with modprobe.
So check if all your modules are loaded after boot-up.
--
To UNSUBSCRIBE, email
> Note that it isn't recognizing it as a PalmOS PDA. Try "modprobe visor".
> I've noticed that on Etch, recognizing devices is often unreliable, and I
> have to manually load required modules (e.g. usblp).
I'm running Etch and have exactly the same problem. After loading the
manual manually I cou
Hi,
after updating my Debian system, I cannot sync my
Sony Clie organizer.
I'm connecting the PDA via USB with my PC. As device
I always used /dev/pilot which is a link to /dev/ttyUSB0.
However, it does not work anymore.
How can I figure out if I'm still using the right device?
When I connect
Hi,
are there any tools that allow one to
split, merge and append PDFs?
Thank you.
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I'm using KDE as window manager.
Where can I define the default colors for a xterm session which
is started by clicking on the xterm icon in the KDE bar?
Thank you.
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
after running dist-upgrade couple of days ago I get the error message when
trying to set a new background picture with "fbsetbg":
fbsetbg: Something went wrong while setting the wallpaper. Run 'display
-geometry 1280x1024+0+0 -window root
/home/chris/.fluxbox/backgrounds//picture.jpg' from an
Hi,
after running dist-upgrade couple of days ago I get the error message
when trying to set a new background picture with "fbsetbg":
fbsetbg: Something went wrong while setting the wallpaper.
Run 'display -geometry 1280x1024+0+0 -window root
/home/chris/.fluxbox/backgrounds//picture.jpg'
from an
Hi,
I'm using the current testing version of Debian.
What happened to the package mplayer?
When typing "aptitute install" and than hitting TAB twice
I get this list:
mplayer mplayer-amd64mplayer-k6 mplayerplug-in
mplayer-386 mplayer-custom mplayer-k7
mplayer-586
Hi,
I'm trying to play some Realplayer listening samples
from the amazon.com website (using Firefox).
>From realplayer.com I've successfully downloaded and
installed the recent version of realplayer.
However, when I click on the audio sample and choose
realplay (the application I've installed), r
Hi,
after running my Debian box for couple of hours I get
every 5 minute a mail by cron with the content:
ipac-ng chains or rules corrupted, fix this with fetchipac -S
Running fetchipac -S I get the error message:
calloc failed
: Cannot allocate memory
Any ideas what's wrong with ipac-ng and
Hi,
till now, I've been working with the Windows
"Swiss Army knife" DUMPBIN.
Are there any similar disassembler for Debian?
Thanks
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> http://whoppix.hackingdefined.com/WHoppix-HDinstall.swf
>
> That file doesn't have any navigation, so you might want to get the viewer
> along with its configuration and build your own short HTML page.
Thank you. I could download the movie but as you mentioned I can't play
it without the confi
Hi,
I'd like to download the swf video which you can get on
http://whoppix.hackingdefined.com/Whoppix-HD-install.html
Is there any way to do that?
Thanks
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
that's my current sources.list.
Do you think it's OK? Or are any entries missing to run
the testing dev tree?
deb http://ftp.univie.ac.at/systems/linux/debian/debian/ testing main
deb-src http://ftp.univie.ac.at/systems/linux/debian/debian/ testing main
deb http://ftp.de.debian.org/debian/
Hi,
I'm trying to run my notebook with the ATI Radeon
Mobilty 9700 video card. After downloading and installing
the ATI driver (from ati.com) and creating the config file
XF86Config-4 with the tool "fglrxconfig" I get the error
message when running startx:
[...]
(EE) Failed to load module "fglrx"
>> > I'm looking for a GUI tool which shows the current memory usage for
>> > each running process of my debian box.
>
> asmem
> bubblemon (Gnome applet)
> dmachinemon (network)
> gdesklets (Gnome)
> loadmeter
> procmeter3
> xmem
> xosview
> xsysinfo
I tried all most of the tools. But they just
Hi,
I'm looking for a GUI tool which shows the current memory usage for each
running process of my debian box.
I know there's top but I need these information as graphics.
Any ideas?
Thanks
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
>
> I've just installed mplayer from the Sarge packages. I can play my video
> files but the option fullscreen is not available. The screen remains
> always in the small size.
>
> My graphics card is a Viper 770. lsmod prints: "nVidia Corporation NV5
> [RIVA TNT2/TNT2 P ro] (rev 11)"
>
> I've tr
Hi,
I've just installed mplayer from the Sarge packages. I can play
my video files but the option fullscreen is not available. The
screen remains always in the small size.
My graphics card is a Viper 770. lsmod prints:
"nVidia Corporation NV5 [RIVA TNT2/TNT2 P
ro] (rev 11)"
I've tried all avail
On Sat, 20 Nov 2004 04:30:11 +0100, Henrique de Moraes Holschuh wrote:
> On Sat, 20 Nov 2004, Christian Christmann wrote:
>> I've just installed Cyrus-imap and sasl2-bin from the Sarge packages.
>> Everthing works fine, but in the /var/log/mail.log I get permanently
Hi,
I've just installed Cyrus-imap and sasl2-bin from the Sarge packages.
Everthing works fine, but in the /var/log/mail.log I get permanently the
error message:
server cyrus/deliver[14580]: connect(/var/run/cyrus/socket/lmtp)
failed: Permission denied
But an "ls -la /var/run/cyrus/socket/ " says
>> I've a Palm IIIxe PDA. Now I'm looking for a tool which is running with
>> Linux and Windows to manage the data of the PDA. My idea was to put the
>> data directory on my debian server and to access it with my notebook
>> which is running both Debian and Windows XP. Thus, I could manage the
>> d
Hi,
I've a Palm IIIxe PDA. Now I'm looking for a tool which is running with
Linux and Windows to manage the data of the PDA. My idea was to put the
data directory on my debian server and to access it with my notebook which
is running both Debian and Windows XP. Thus, I could manage the data with
b
Hi,
are there any SCP GUI clients for Sarge?
Thanks
Paul
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> Christian Christmann <[EMAIL PROTECTED]> wrote:
>>
>> Hi,
>>
>> my xmule was running fine for weeks. Today I run an aptitude update &&
>> aptitute upgrade on my sarge box and xmule has been upgraded to version
>> 1.9.4b-1. Now, xmule is perm
Hi,
my xmule was running fine for weeks. Today I run an aptitude update &&
aptitute upgrade on my sarge box and xmule has been upgraded to version
1.9.4b-1. Now, xmule is permanently crashing after some minutes with the
error message:
"
OOPS! - Seems like xMule crashed
--== BACKTRACE FOLLOWS: ==--
On Sat, 13 Nov 2004 14:00:09 +0100, Antonio Rodriguez wrote:
> On Sat, Nov 13, 2004 at 06:26:09AM -0600, Ron Johnson wrote:
>> On Sat, 2004-11-13 at 12:38 +0100, Christian Christmann wrote:
>> > Hi,
>> >
>> > I've installed mplayer from the sarge package
On Sat, 13 Nov 2004 13:30:13 +0100, Ron Johnson wrote:
>> I've installed mplayer from the sarge packages. The player works fine
>> but I can't use it in fullscreen mode. I've tried all available drivers
>> for the video options but the screen size still remains small. My
>> graphic card is a Vippe
Hi,
I've installed mplayer from the sarge packages. The player works fine
but I can't use it in fullscreen mode. I've tried all available drivers
for the video options but the screen size still remains small.
My graphic card is a Vipper 770, lspci indicates:
nVidia Corporation NV5 [RIVA TNT2/TNT2
Hi,
I'm trying to install my HP printer with cups on my sarge box.
As mentioned in the documentation I use the command
'/usr/sbin/lpadmin -p LaserJet6L -E -v parallel:/dev/lp0 -m
/usr/share/cups/model/HP-LaserJet_6L-hpijs.ppd' and get
the message:
"lpadmin: add-printer (set device) failed: client
Hi,
I'm using Sarge.
How can i create a copy of an audio cd in the
command line (X server is not running)?
Thanks.
Christian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I have a Netgear WG511 WLAN card with Prism chipset.
The card is runnig fine. Now I'm trying to run Kismet 2004.04.R.
But the execution of the program fails with this error message:
Will drop privs to XXX (XXX) gid XXX
No specific sources given to be enabled, all will be enabled.
Enabling ch
HI,
I'm looking for a tool to adjust the speed of my
CPU depending on if my notebook is running with a
battery or without.
Are there any debian packages I could use?
Thank you
Regards,
Christian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
On Wed, 14 Jul 2004 12:40:13 +0200, John Summerfield wrote:
> Christian Christmann wrote:
>
>>Hi,
>>
>>when I run a telnet session I get the message
>>
>>"Escape character is '^]'."
>>
>>I couldn't figure out which butto
Hi,
when I run a telnet session I get the message
"Escape character is '^]'."
I couldn't figure out which buttons I have to hit
to get this ^] .
Any hints?
Probably you all know it ;)
Thanks,
Christian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble
Hi,
I've just installed the Debian cyrus imap server packages
on my mail server. Unfortunately, I can't connect to the imap
server with my email clients which are running on my client
boxes. When I install sylheed-claws on the server I can access
the IMAP directories without any problems.
Of cours
Hi,
I am looking for a Debian tool which indicates the
availibility of other wlan networks in the range of
my wlan card.
And suggestions?
Regards,
Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I'm looking for a Debian package (Sarge) to view
M$ chm files?
Thank you.
Christian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I've a Gericom Blockbuster m2040 XL notebook. On the
front side of the case there are some multimedia buttons
like the play or forward button for the controll of audio/
video programs.
Unfortunately, these buttons don't work with Linux (Debian
Sarge) by default and I have no idea how to get th
Hi,
I am using Kernel 2.6.5 and Debia Sarge. During
the boot process fsck 1.35 is checking my filesystems
when they have been mounted couple times. When my
linux installation was "fresh" this process took
just some seconds. But since I have made some upgrades
it now takes very long approx. 5 mi
Hi,
on my Debian box I'm running the kernel 2.6.6.
I've read somewhere that the kernel 2.6 doesn't need
the SCSI-emulation for IDE-burner anymore and thus
I disabled this option while compiling the kernel.
Now burning CDs is running very slowly. Even if I tell
Xcdroast to burn with 16x, the speed
Hi,
the BIOS if my motherboard doesn't recognize my
new 160GB harddisk correctly. I'd like to boot from this
device.
Is there a way to overcome this problem with lilo etc. ?
Thanx.
Regards,
Christian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Con
"Jan Willem Stumpel" <[EMAIL PROTECTED]> schrieb im Newsbeitrag
news:[EMAIL PROTECTED]
> Thomas Adam wrote:
> > --- Christian Christmann <[EMAIL PROTECTED]> wrote:
>
> >> my resent apt-get upgrade of my German sarge system failed while
> >> ins
Hi,
my resent apt-get upgrade of my German sarge system failed while installing
some locales packages.
When I now execute an upgrade the process always fails with the message:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "de",
LC_ALL =
68 matches
Mail list logo
