Hello,
Can somebody explain why packages for Nagios existed in Jessie but have gone
from Stretch?
Is weird as there are support packages just not Nagios itself.
Thanks
Bell & Clements Limite
Does anybody know why I would get a response of connect: Invalid
argument when I:
ping www.yahoo.co.uk
I also get this error when I run commands like apt-get upgrade.
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Does anybody know why I would get a response of connect: Invalid argument
when I:
ping www.yahoo.co.uk
I also get this error when I run commands like apt-get upgrade.
Thanks
I had a raid 5 array that was working, configured as:
DEVICE partitions
ARRAY /dev/md0 level=raid5 num-devices=4 UUID=641451fb:1b26c30d:1570e92e:7cb2119d devices=/dev/hdc1,/dev/hdd1,/dev/sda1,/dev/sdb1
I got a load of messages on the console:
Apr 15 20:19:58 server1 kernel: md: md0: sync done.Apr
I used to run debian testing, i now run stable (clean install). It seems
that fsck at boot is not working on this installation, the mount count
on the file system is 59 and the maximum mount count is 5. Is there
something that I need to install / configure to get this to work?
Charlie
--
To
I believe that somebody has been trying to break into my machine via
apache2. I have the following in my In my apache2 error log
/var/log/apache2/error.log can somebody explain how they have managed this?
How have I miss configured apache2 to allow this?
sh: line 1: id.com: command not found
rm: c
ember 05, 2004 3:10 AM
Subject: Re: localhost kernel: atkbd.c: Unknown key pressed
> On Sat, Sep 04, 2004 at 08:56:42PM +0100, Charlie Grosvenor wrote:
> > Hello, I have a Microsoft Wireless Desktop Elite keyboard, I keep
> getting
> > messages like these:
> >
> > Se
Hello, I have a Microsoft Wireless Desktop Elite keyboard, I keep getting
messages like these:
Sep 4 19:31:27 localhost kernel: atkbd.c: Unknown key pressed (translated
set 2, code 0xd9 on isa0060/serio0).
Sep 4 19:31:27 localhost kernel: atkbd.c: Use 'setkeycodes e059 '
to make it known.
appea
Hello, I have a Microsoft Wireless Desktop Elite keyboard, I keep getting
messages like these:
Sep 4 19:31:27 localhost kernel: atkbd.c: Unknown key pressed (translated
set 2, code 0xd9 on isa0060/serio0).
Sep 4 19:31:27 localhost kernel: atkbd.c: Use 'setkeycodes e059 '
to make it known.
appea
Subject: Re: Exim4 and Message could not be sent because its size exceeded
the server's limit
> On Sat, 28 Feb 2004 21:48:53 +
> Charlie Grosvenor <[EMAIL PROTECTED]> wrote:
>
> > I have just upgraded to exim4 and now I cannot send large messages
(50mb), I
> >
Subject: Re: Exim4 and Message could not be sent because its size exceeded
the server's limit
> On Sat, 28 Feb 2004 21:48:53 +
> Charlie Grosvenor <[EMAIL PROTECTED]> wrote:
>
> > I have just upgraded to exim4 and now I cannot send large messages
(50mb), I
> >
I have just upgraded to exim4 and now I cannot send large messages (50mb), I
have increased the limit in the file:
/etc/exim4/conf.d/main/01_exim4-config_listmacrosdefs
MESSAGE_SIZE_LIMIT = 1000M
and updated the main configuration file update-exim4.conf and restarted exim
and it makes no
I wish to remove a
package from the dpkg install list but not to remove any of the files the
package has put in place. How would I go about doing this?
Charlie
This e-mail has been scanned for all viruses by Star Inter
Hi
On Mon 09/09/2002 at 20:43 I posted a message to this mailing
lists subject "NFS Mounted Home Directories Machine Keeps Locking Up".
Despite doing what people recommend I am still having the problems (I
must admit it doesn't seem to happen as often but it is very annoying).
Is there any
: [EMAIL PROTECTED]
Subject: Re: NFS Mounted Home Directories Machine Keeps Locking Up
In article <1031600586.844.12.camel@debian1>,
Charlie Grosvenor <[EMAIL PROTECTED]> wrote:
>Hi
> I have set up NFS mounted home directories on my machines. On my
server
>machine I am
Hi
I have set up NFS mounted home directories on my machines. On my server
machine I am using the kernel NFS server, and am running Debian woody.
The nfs exports file looks like:
# /etc/exports: the access control list for filesystems which may be
exported
# to NFS clients.
In Debian woody how do I turn on user logon logging, so that a log entry
is produced each time a user logs on?
Thank you
Charlie
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.371 / Virus Database: 206 - Release Date: 13/06/2002
I have the package libc6 installed but don't have the file /usr/bin/ldd
How can I solve this problem?
Charlie
-Original Message-
From: Sean Perry [mailto:[EMAIL PROTECTED] On Behalf Of Sean 'Shaleh'
Perry
Sent: 05 June 2002 17:40
To: Charlie Grosvenor
Cc: debian-user@l
Hi
I have just done a clean install of potato and then upgraded to
woody. I then tried to install a new kernel, during the install it says
the following:
Setting up kernel-image-2.4.18-586tsc (2.4.18-5) ...
/usr/sbin/mkinitrd: ldd: command not found
/usr/sbin/mkinitrd: ldd: command not fou
Hi
How can I create a boot disk for my system? I am
running woody with the 2.4.18-k7 kernel with initrd. I have one 20gb partition.
Thank you
Charlie
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6
Hi
I am using woody and would like my hard disk to
be checked every time the machine starts up. How do I set it up to do this?
Thank you
Charlie
Hi
I am using Debian woody and am using the
xserver-s3 I can go into X ok but in the information that gets logged to the
console I get the following:
sh:
/usr/X11R6/lib/X11/xkb/xkbcomp: No such file or directory Couldn't load XKB keymap,
falling back to pre-XKB keymap
_Fon
little memory for mode "800x600"
(--) S3: NB. 1 scan line is required for the hardware cursor
(--) S3: Removing mode "800x600" from list of valid modes.
(**) S3: Mode "640x480": mode clock = 25.200
(--) S3: Too little memory for mode "640x480"
(--) S3: NB. 1 s
Hi
I
have a couple of machines with S3 Trio 32 graphics cards in. I am trying to get
XFree86 version 4.1.0 work on these machines, I am using Debian woody. According
to the http://www.xfree86.org this card
is supported but I cannot get it to work. Does anybody have one of these
Hi
I have debian woody installed and have a number of packages from
the unstable distribution installed. How can I list all the packages
that I have installed that are from the unstable distribution only?
Thankyou
Charlie
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-vir
Hi
When ever I start my machines I get the following message
appearing on the screen over and over again.
modprobe: modprobe: Can't locate module net-pf-1
modprobe: modprobe: cannot create /var/log/ksymoops/20020321.log
Read-Only file system
The only way to boot the machine
Hi
I am running debian woody and
bind 9, whenever i restart of shutdown my machine it hangs for about 5 minutes
after it says "Stopping domain name service: named" then it says "rndc: Connect
failed timed out". I have removed bind9 and
deleted the configuration files and then reinstalled
Hi
I have a ppp connection to the internet and want to allow people outside
my network to be able to query my dns server. How can i get bind9 on a
machine to use ppp0 as well and not just eth* interfaces.
Thankyou
Charlie
Hi
I am trying to get my soundcard to work in debian with ALSA. I have used
alsaconf to configure the sound card and it has created a file called
/etc/alsa/modutils/0.5 with the following contents:
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.4.3b ---
alias char
Hi
I am trying to get my soundcard to work in debian with ALSA. I have used
alsaconf to configure the sound card and it has created a file called
/etc/alsa/modutils/0.5 with the following contents:
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.4.3b ---
alias char
Hi
I have given up with the soundblaster 128. What i want to do is use
music software like NoteEdit and brahms, and plug in a midi keyboard into my
soundcard and create midi files, when use the software to edit them. The
trouble is i am not sure what sound cards linux supports for doing this. I
Hi
I am trying to get my sound blaster 128 card to work with debian woody.
In the /etc/modules file i have put es1371 the name of the required kernel
module, by doing this I can play sound, is there anything else i should put
in the /etc/modules file? What i am trying to do that doesn;'t work i
Hi
Has anybody successfully used etherwake to start a machine remotly? I
have a D-Link DFE-530TX which supports Wake-On-LAN but i cannot get it to
work.
Thankyou
Charlie
hi
My machine has three network cards in it each attached to a different
network. I am trying to use dhcpd to provide ip addresses to machines on two
of the networks but don't want it to provide ip addresses to the third
network. I have but subnet declarations for the first two networks, but
ha
Hi
I am trying to use the fetchmail init script that comes with the
fetchmail debian package. Whenever i try and start the script i get:
debian:/etc/init.d# ./fetchmail start
Starting mail retrieval agent: fetchmail (failed!)
but if it run:
./fetchmail debug-run
it works fine. Why could thi
Hi
Is it possible to have the ext3 filesystem with woody and if so how do i
go about installing it with the ext3 filesystem?
Thankyou
Charlie
Hi
I have just used the command adduser to add some users to my system. I
have noticed that each user added has read rights to other users home
directory. Why is this? how can i stop adduser from creating home
directories with these permissions?
Thankyou
Charlie
Hi
Is it possible to install a few sid packages in woody and still use
apt-get to keep them up to date? I wish to install the sid samba packages in
woody as they support a few features that i require. I have done this by
downloading the packages manually using ftp and installing them. What i
wo
Hi
Is it possible to bridge a ppp
interface with an ethernet interface?
Thankyou
Charlie
Hi
I have a machine running debian that has a ppp connection to the
internet (ppp0) and an ethernet connection to my network (eth0. I have 6
static public ip addresses, at the moment the debian machine has two of
these one for the external interface ppp0 and one for the internal interface
eth0.
Hi
I have noticed that a number of
people who post to this list post blank messages, with the actual message
attached. Why is this?
Thankyou
Charlie
Hi
I used to have one network card in my debian machine, this was fine
debian setup set it up for me. I have now put another two cards in there and
do not know how to configure them with debian. Two of the cards are Ne2000
ISA cards:
Ne2000 ISA 0x300 irq=5
Ne2000 ISA 0x320 irq=3
the other one
Hi
I have installed the PPTP-linux
package and am not sure how to configure it from there. I have a Alcatel Apeed
Touch Pro ADSL router which you can use PPTP to
connect to the internet though it, it works fine with windows, but i would like
to use it with debian. How do i configure the
I am thinking of moving from redhat to debian. Could you please tell me what
version of KDE 2 comes with woody. The latest stable version is KDE 2.2.2.
Thankyou
Charlie
- Original Message -
From: "Paolo Alexis Falcone" <[EMAIL PROTECTED]>
To: "Debian Users Mailing List"
Sent: Thursday, J
I am thinking of moving from redhat to debian. Could you please tell me what
version of KDE 2 comes with woody. The latest stable version is KDE 2.2.2.
Thankyou
Charlie
- Original Message -
From: "Paolo Alexis Falcone" <[EMAIL PROTECTED]>
To: "Debian Users Mailing List"
Sent: Thursday, J
45 matches
Mail list logo
