Re: Can't switch back to gnome on xorg

t works on Wayland. I appreciate your help. Hansoo On 2021/08/25 15:40, Cindy Sue Causey wrote: On 8/25/21, Hansoo Chang wrote: Dear Friends, I am using Debian Buster with gnome on wayland. Recently, I tried to switch back to gnome on xorg at the start-up login screen choosing the 

Can't switch back to gnome on xorg

Dear Friends, I am using Debian Buster with gnome on wayland. Recently, I tried to switch back to gnome on xorg at the start-up login screen choosing the 'gnome on xorg'. However, I am immediately turned back to the original login screen. I searched the web, but could not find a solution. I

Re: Solved: Re: Can't install flashplugin.nonfree. ERROR: wget failed to download

Thank you very much for your very thoughtful comments, Bob. I truly appreciate them. Actually, I was about to unsubscribe from the list when I found them. :-) > Probably the upstream problem was resolved and this was then allowed. > When external influences cause success and failure outside of you

Re: Solved: Re: Can't install flashplugin.nonfree. ERROR: wget failed to download

I thank you all for your help. But there seems to be a big misunderstanding. The issue is not how to use sudo or how to set up no-password. If you could see my original report, it would be clear. But it seems to have fallen off the thread. Here is what happened. $sudo apt-get install flashplu

Re: Solved: Re: Can't install flashplugin.nonfree. ERROR: wget failed to download

8PM +0900, Han Soo Chang wrote: >> > Thanks for your help. >> > >> > It was just that I needed to apt-get install as root, not sudo apt-get. >> > >> > The following command >> > # apt-get install flashplugin-nonfree >> > worked just fine.

Solved: Re: Can't install flashplugin.nonfree. ERROR: wget failed to download

a certain directory. This is a little bit confusing for a newbie like me. But, anyway, I can now see the videos on youtube. I appreciate the help by everyone. Han Soo 2012/4/30, Johan Grönqvist : > 2012-04-30 07:46, Han Soo Chang skrev: >>> If you try fetching it with wget: >&g

Re: Can't install flashplugin.nonfree. ERROR: wget failed to download

Thanks for your help. > If you run "update-flashplugin-nonfree --install" again, does it work now? > It gives me the same error. > Otherwise: > > If you paste the URL: > > > into a web-browser, do you see the (rahter

Can't install flashplugin.nonfree. ERROR: wget failed to download

Hi, I recently installed debian squeeze, but I can't see youtube videos on iceweasel. $ sudo apt-get install flashplugin-nonfree Above command ends with a following error message. (My sources.list has non-free included) ERROR: wget failed to download http://people.debian.org/~bartm/flashplugin-

[Solved] Re: Problem with resolution on Radeon HD 7450 card (Squeeze)

Thank you guys! It seems that the problem is now solved. I purged my dkms package, and re-installed dkms from squeeze backports I purged fglrx-driver, fglrx-control packages, and re-installed them from squeeze-backports. Then, the fglrx.ko was successfully generated. I rebooted the system, and th

Re: Problem with resolution on Radeon HD 7459 card (Squeeze)

Thanks for your advice. 2012/4/28, Camaleón : > Let's don't make guesses ;-) better send/copy your current "/etc/X11/ > xorg.conf" file so we can see what you have added and how it looks like > now. > Here is my /etc/X11/xorg.conf Section "Device" Identifier "ATI" Driver "fglrx" Option "ChipI

Re: Problem with resolution on Radeon HD 7459 card (Squeeze)

I might have made a slight advance. I added an option ChipID 1002:6779 to designate my card (Radeon HD 7450) to be identical with Radeon HD 6450. Then, I got the following /var/log/Xorg.0.log, which says that "DRI initialization failed. kernel module (fglrx.ko) may be missing or incompatible. 2D

Re: Problem with resolution on Radeon HD 7459 card (Squeeze)

> ..what happens if you try the radeon driver from backports? > Or dist-upgrade to wheezy? Well, if I change the word fglrx in my xorg.conf to radeon or radeonhd, it gives me a black console. Actually, I was running wheezy on my machine, until X window system crashed after my recent upgrade of th

Re: Problem with resolution on Radeon HD 7459 card (Squeeze)

Thanks again for your help. I didn't realize that I needed to install xorg from the backports besides an upgraded kernel and fglrx driver. Now, I installed linux-image-3.2.0-0.bpo.1-amd64, xorg, fglrx-driver, and fglrx-control from the squeeze backports. # aticontrol --initial again failed to re

Problem with resolution on Radeon HD 7459 card (Squeeze)

Hi, I recently installed debain squeeze on Hewlet Packard Pavillion h8-1280jp, which has a ATI Radeon HD 7450 graphic card. However, the resolution of the monitor is limited to 1280 x 1024, and I cannot get any higher resolution. I have xserver-xorg-video-ati, xserver-xorg-video-radeon, and xserve

Re: Boot disk vs. LILO

Hi Steve, Not sure if this is going to get to you or not. It's Kyle from the old core group. Just wanted to connect and touch base and see if I can reach folks from the old gang. Kyle K Chang, Broker, ABR C&C Realty Group, Inc. - LoftsNHomes.com Direct Line: 312-373-7120 E-mail

Determine Routing

Dear sir, I am a new user of Linux. Very Interested to Know about linux networking. Can any one assist? Any command. explaination or reference that I can use to assit me to understand on this matter. Question 1. How can I determine whether a route was added by a program such as gate

Re: Application results Confirmation

Hello My name is Chang and I am a   mo rtgage broker that was assigned to your case. I just review your application and glad to inform you that we can approve you. Please click on this link and enter some more info so I cancomplete your application. We should be able to finish thisup pretty

Re: First Install problems

Mike Adolf wrote: I am new to debian, was using Mandrake until 9.2 update trashed all. Anyway, I installed Woody and can't get the modem or sound to work. My modem is internal ISA (hardware controlled) with jumper settings of (port=02F8, IRQ=3) = COM2. Modem works in Windows and also in Mand

Chinese Big5

hi dear  Where can I download the Dedian Chinese Traditional installing manual ? thanks

Re: xfree86-4 depth question (s3virge)

Have you tried 15 bits yet? This setting gives me acceptable performance. -- Chia-Sheng Chang (Jonathan Chang) Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan 10617, R.O.C. E-Mail: [EMAIL PROTECTED]

[OT] debianHELP is down??

No response from $ ping www.debianHELP.org. Anyone knows what happens to this good website? Jonathan Chang

Re: How to create /dev/gpmdata?

, but /dev/gpmdata is still missing. However, I do find /dev/gpmctl. Is there any relations between gpmctl and gpmdata? Best regards, Jonathan Chang

How to create /dev/gpmdata?

Hi, there, I can not find this device in /dev. Unfortunately, MAKEDEV does not know how to create it. Jonathan Chang

Which kernel to use for SMP?

support, but I am afraid that these 2.4 test versions are not stable enough. Can you give me some advice? Thanks in advance. Jonathan Chang

Re: Thank you, Corel, for PPP

3.0.12-3 PCMCIA Card Services for Linux. I hope these packages can solve your modem problem, too. Best regards, Jonathan Chang

Re: video viewer

On Tue, 22 Feb 2000, [ISO-8859-1] Nils-Erik Svang緳d wrote: > I use gtv, works fine for me and are available as debs > there is one called mtv which also is good but the inter face is not free, > the server is though > /nisse > I tried gtv, but the audio does not work. It seems that gtv still lac

Re: Thank you, Corel, for PPP

x the problem. So that's my report. Any idea? Jonathan Chang

Re: Thank you, Corel, for PPP

is is the problem you mentioned as "the result of a combination of tcp timestamps and header compression"? Also, is there any standard way (e.g. pppconfig) to turn off tcp timestamps other than "echo 0 >/proc/sys/net/ipv4/tcp_timestamps"? And, how to turn off ppp header compre

Re: pppd/modem frustration.

ately, I do not know how to solve this problem. About the flow control, there is an example in ppp FAQ that use crtscts as an option of pppd. Did you test this option before? By the way, how do you generate this "cardctl ident" information? Regards, Jonathan Chang

Re: Router Project

On Mon, 31 Jan 2000, Peter Good wrote: > I have heard things about the linux router project, has anyone here come > across it? or a similar thing in debian? > > Peter Good > The main site http://www.linuxrouter.org is badly out of date. Best starting point for docs and files currently is http:/

Standard way to change IP?

Hi, all Is there any standard way for debian to change ip address? Or I need to modify files in /etc manully? Thanks in advance. -- Chia-Sheng Chang Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan 10617 E-Mail: [EMAIL

XF86Config for Tiedent ProVidia9685

Hi all, I need the XF86Config for this video card (Tiedent ProVidia9685). If you have a working config file, please mail me a copy. Thanks in advance. -- Jonathan Chang Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan

xconsole problem

Hi, all, I run xdm on my computer but every time I login, xconsole always responses "can not open console". How to solve this?? Thanks. -- Chia-Sheng Chang Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan 10

Question about dselect

Hi, all, With dselect, how to install or upgrade a specific package without automatically upgrading all packages? Thanks. -- Chia-Sheng Chang Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan 10617 E-Mail: [EMAIL

Sound support enabled in 2.2 kernel deb package?

; enabled by default in the 2.2 series kernel deb package? Thanks in advance. Best regards, -- Chia-Sheng Chang Institute of Communications Engineering College of Electrical Engineering National Taiwan University Taipei, Taiwan 10617 E-Mail: [EMAIL PROTECTED]

Re: GUI for Samba

ed to you as well..." Matthew 6:33 > > __ > Get Your Private, Free Email at http://www.hotmail.com > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > You may want to try gnomba of the Gnome project. --

mpeg viewer recommendations?

Can anyone recommend a decent mpeg video viewer? Do any even exist? ;) Thanks. Jae

Re: Netscape Issues

Netscape is just buggy. I can crash your netscape in dozens of ways. It's easy w/ a bit of javascript: recursive loop, twiddle a DOM object the wrong way, and POOF! Netscape in Windows does the same thing. Nothing new here, Netscape just blows up. Jae

Re: Debian vs. RedHat

Yes, dselect isn't perfect. It doesn't have the most intuitive UI but... It'll also do the most amazing, surprising thing... actually work! Even when I don't expect it to work, it works! Several times while upgrading from hamm or whatever and seeing a list of 100 packages needing to be upgraded,

How to keep both kernel-2.0.36 and 2.2.x? (in terms of lp setting)

recognize the version of kernel it is running and using different setting for corresponding kernels. But I am not familiar with script language... Thanks in advance. Yi-ping Chang

Which text editor is compatible with crxvt?

ng like \056\378\053. It didn't turn these special characters into Chinese but just print their code. So if somebody can help me out on this, I will really appreciate it. Thanks in advance. Yi-ping Chang

What filter to use for HP Deskjet 520?

r just the ink cartridge has dried out. The only other choices maybe possible are 'deskjet-filter', 'dj500c-filter', and 'j550c-filter'. Can anybody tell me which one definitely will work before I spend money on a new ink cartridge? Thanks! Yi-ping Chang

RE: [Fwd: Installing debian with Win98]

> -- > From: Ed Cogburn[SMTP:[EMAIL PROTECTED] > Sent: donderdag 7 januari 1999 8:21 > To: Debian-Users > Cc: recipient.list.not.shown > Subject: Re: [Fwd: Installing debian with Win98] > > Olaf Meeuwissen wrote: > > > > Now, if I could only get that silly Window$

Problem on customizing kenel

is 'as86'? Is there any extra package I should install to accomplish the job? Thank a lot! Yi-ping Chang <[EMAIL PROTECTED]>

RE: killing off the *)&@ NT bootloader

Felix > ___ > Felix Chang > > Hoogovens Research & Development > P.O. Box 10.000 > 1970 CA IJmuiden > tel (+31) 251 492927 > fax (+31) 251 470114 > [EMAIL PROTECTED] > > -- > From: Rafael Kitover[SMTP:[EMAIL PROTECTED] > Sent:

RE: APM on Linux?

either. So, I chose to disable suspend in BIOS and only allow the PC to fall into standby mode. Until now, this works. BTW, I have an Asus TX97 with AMD K6-233. The apm utilities work well, (except for "apm -s" :)) If someone has a solution I'd be happy to learn of it. Fel

WP8 - now does it *read and write* Word docs?

roblems in StarOffice with this) I don't need the equation editor (LaTeX is my friend), but I'm perfectly willing to sacrifice some megs on my HD for not having to reboot to NT to read silly Word attachments to my e-mails... Has someone encountered/discovered anything? Greetings Fel

RE: hardware questions - Promise Ultra DMA 33 + Asus TX97E

At a certain point it just miraculously worked.. Can't (won't :)) even reproduce the problem now. Strange. Regards Felix > ___ > Felix Chang > > Hoogovens Research & Development > P.O. Box 10.000 > 1970 CA IJmuiden > tel (+31) 251 492927 &

RE: switch of Debian

; Be careful, you might lose data and/or end up with corrupted > data if you don't do this! The same applies for rebooting. > > See man shutdown for details. > > HTH, > Felix > ___ > Felix Chang > > Hoogovens Research & Development > P.O. Box 10.000

hardware questions - Promise Ultra DMA 33 + Asus TX97E

problem, but not with these recent kernels I use? What DMA channel is used for it? Should I reserve it in BIOS? I hope someone has an idea here If you want, I'll be more specific (though I have no access to that PC here) Thanks in advance, Felix > ___ > Felix Chang > >

"Re:" (off-topic)

;. I always thought it was the Latin "re" as in "about", or "subject". Anyone who can shed some light on this matter? Thanks Felix > ___ > Felix Chang > > Hoogovens Research & Development > P.O. Box 10.000 > 1970 CA IJmuiden > tel (+31) 251 492927 > fax (+31) 251 470114 > [EMAIL PROTECTED]

procmail autoreply script?

stead of [EMAIL PROTECTED]' Can some procmail guru help me with this? I find the procmail docs somewhat unclear. Thanks in advance, Felix -- ir F.K.K. ChangHaarlemmerstraat 303 http://stad.dsl.nl/~changfkk 2312 DV Leiden

RE: PPP options for different providers - how ?

Thanks to all who suggested that I toss away my /etc/ppp/options file and reinstall using pppconfig. It now works. Felix

SVGAlib, ZGV and ET6000 - hi res modes?

-keys as stated in the zgv manpage do not work. Under X, i can get 1280x1024x256. Could someone explain to me how I set up svgalib / zgv ? Thanks in advance, Felix -- ir F.K.K. ChangHaarlemmerstraat 303 http://stad.dsl.nl/~changfkk/index.html

PPP options for different providers - how ?

u name "myname" auth etc. in the file /etc/ppp/options. These should be different for each provider (esp. the login name, authentification, etc.). Now it only works for one provider. How can I make sure that the right options file is read for each provider? Thanks in advance, Felix

Debian and Win32?

Hello all, As I am forced to work with Dos 95 at work here - after a fruitless crusade to be at least *allowed* to use Debian/TeX, I stumbled upon the Cygnus win32 - GNU - thing. Nice, since I now can use Xfig, my favourite drawing program and bash, my favourite shell on this stupid 95 machine

Zip drives

Hello all, Is there a package that can get/set the status of Zip disks like the Iomega tools do (write protect, unprotect until eject, etc.)? Bye Felix

Powersave / clock / crontabs

wrote a crontab to update the clock -due to the powersave mode- only to find out no cronjobs were being run) Is this something I have to live with or is there a solution? (With anacron I'll have to reboot, don't I? And the clock keeps being slow) Felix Chang -- ir F.

Successfully configured OPL3-SAx

cessfully configured my sound card :) , with the help of the following home page: http://www.fortunecity.com/skyscraper/solo/216/index.html Cheng-Chang Wu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

ae don't accept arrow keys

Hi, My other editors can handle arrow keys well, but ae can it only under text mode, not under X. it prints ^[[C when I press left arrow key? -- Cheng-Chang Wu -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

xplaycd can't open /dev/hdd, permission denied.

disk 22, 64 May 28 02:50 hdd Cheng-Chang Wu -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

XEmacs can't find pathes

Hello, I am using XEmacs recently. I have found 2 problems, I think they are bugs. The problems: 1. GNUS try to find active file under /usr/lib/news, I think debian installs active file under /var/lib/news. 2. When I execute CVS with menu "Tool/VC/Update CVS Directory", XEmacs try to find /

XEmacs can't find pathes

When I invoke GNUS, it says: nnspoll() open error: The active file doesn't exist:/usr/lib/news/active. But my Debian box hat active file under /var/lib/news, not /usr/lib/news. When I invoke "CVS Update Directory" with the Menu Tools/VC, XEmacs says it can't find file /usr/local/bin/cvs. M

How can I set up BBS with Debian Linux?

Hello, I need to set up a BBS for my company. Does anyone know, what kind of software do I need? Thanks a lot. Cheng-Chang Wu -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

Where are xmkmf and imake?

I can't not find xmkmf and imake in Debian 1.3. They were in xbase, but now they are not there. Which package contents these two programs? -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .