have the same labels as the old
ones.
https://wiki.debian.org/fstab#Labels
On a side note, last time I tried to install Debian on NVME, it
wouldn't even find the storage device. I hope this has improved since
then.
--
Bruno Schneider
: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages libsane installed :
libsane-common 1.2.1-2
libsane1:amd64 1.2.1-2
Since last update is there new driver to install.
Best regards,
Bruno Volpi
Chaillac
2524 route
On Tue, Oct 29, 2024 at 11:03 AM Bruno Schneider wrote:
> Well, journalctl says nothing about popularity-contest. I would expect
> SMTP to servers outside to fail but
My bad there, journalctl must be run by a privileged user. Doing so, I
can see lots of "unable to submit report to..
7;t know how else I
could look into why popularity-contest consistently fails.
--
Bruno Schneider
east, logrotate should be erasing the old ones.
--
Bruno Schneider
On Fri, Oct 4, 2024 at 3:18 PM Bruno Schneider wrote:
>
> I use Debian testing on a few machines. I recently upgraded all
> packages in one of them and now Firefox won't play some videos on
> YouTube or play any music on YouTube Music.
>
> Comparing against a working machi
nstalled, just to make sure that such
support does not come from these packages.
--
Bruno Schneider
irefox problem would cause 404 errors. These happen
because of wrong addresses or faulty servers. So maybe the server you
were using was having problems at the time...
--
Bruno Schneider
f Debian 13 (testing) and I remember that
Synaptic would not start using the desktop icon. I remember changing
something on /usr/share/applications/synaptic.desktop and it started
working. I think it was the Exec parameter. It is now
"Exec=synaptic-pkexec", and it's working.
--
Bruno Schneider
d nothing changed. I do not have
a working notebook here right now but I believe these packages are not
installed there either. BTW: My firefox says the Audio Backend is:
pulse-rust.
--
Bruno Schneider
codecs.
Anyone can help get support for AAC to work on Firefox?
--
Bruno Schneider
I got stuck.
> Someone can help me investigate or resolve the issue?
>
>
>
> [1]: https://bbs.archlinux.org/viewtopic.php?id=289546z
>
>
>
> --
> Ceppo
>
Hi Ceppo,
FWIW, if you're running firewalld on that machine that seems somewhat
related:
https://libvirt.org/firewall.html#firewalld-and-the-virtual-network-driver
I'm affected by the same issue, digged a little around but still have
no clue what's going wrong.
Regards,
Bruno
signature.asc
Description: This is a digitally signed message part
Am Dienstag, dem 02.04.2024 um 13:35 +1030 schrieb Christian Gelinek:
> Thank you all for your responses.
>
> On 2/4/24 12:41, Greg Wooledge wrote:
> > On Mon, Apr 01, 2024 at 10:06:40PM -0400, e...@gmx.us wrote:
> >
> > The command-line equivalent is "dpkg -L", to list the files that belong
>
emind for this (apt install remind) to trigger
my roller blinds. Pro: Does not rely on any external web service.
Kind regards,
Bruno
s password) before allowing synaptic
to run and doesn't care whether the user is allowed to sudo (my user
is allowed).
--
Bruno Schneider
kexec
Error executing command as another user: Not authorized
This incident has been reported.
If I use sudo, then it works, but pkexec used to open a graphical
password input to run synaptic as root, which is what I want, for
opening it using the launcher. What did I break?
--
Bruno Schneider
Am Freitag, dem 14.07.2023 um 21:52 +0200 schrieb zithro:
> On 14 Jul 2023 10:53, Joe wrote:
> > On Fri, 14 Jul 2023 09:27:12 +0200
> > Bruno Kleinert wrote:
> >
> > > Hello,
> > >
> > > I'm looking for a wireless way to measure temperature
but plan to process measured values in
shell scripts.
Do you have any hardware recommendations and can you share experience?
Kind regards,
Bruno
signature.asc
Description: This is a digitally signed message part
ot;
option to appear, and I can change to AHCI. I'll try to install Debian
now.
--
Bruno Schneider
firmware because of
the the wifi:
https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/weekly-builds/amd64/iso-cd/
I suppose there is no newer installer than that.
--
Bruno Schneider
CI" allows Debian to see the internal SSD.
No such thing on my "InsydeH20 Setup Utility". There is a "SATA Mode:
RST with Optane", but that is information, not an option. I don't see
anything else related to SATA.
--
Bruno Schneider
is a "Boot Mode" set to
"UEFI", but I can't change that. Under "Security" menu, I don't see
any relevant options. Under "Advanced" there is only "Intel VTX" and
"Intel VTD", which don't seem relevant.
The previous Linux installation is using the SSD normally. What am I
doing wrong?
--
Bruno Schneider
Answering to myself for future reference:
I installed fonts-freefont-otf and the problem seems to be fixed. This
package is not recommended nor suggested by octave.
I couldn't find a way to configure a different font file as default font.
--
Bruno Schneider
other fonts instead?
--
Bruno Schneider
On Fri, Mar 1, 2019 at 2:18 PM Reco wrote:
>
> Please post the contents of /proc/meminfo. And "sar -r ALL 1 10", for
> the sake of the completeness.
$ cat /proc/meminfo
MemTotal:3975380 kB
MemFree: 1886004 kB
MemAvailable:2307332 kB
Buffers: 49840 kB
Cached:
My system started using swap space even when there is available RAM:
$ free -m
totalusedfree shared buff/cache available
Mem: 388210042303 63 5732598
Swap: 956 239 717
Can anyone hel
ed a script there, but it seems to be called only at boot time,
and not every time the power plug status changes.
Can anybody help?
--
Bruno Schneider
9 )
I'll follow there. Thanks.
--
Bruno Schneider
to imply a file
system check is been done on one or more partitions. Now I need to
find out why does it think it needs to check it at every boot.
Thanks for the help, Michael Biebl.
--
Bruno Schneider
correct. The swap partition is working after boot.
Can anyone help on how to investigate further?
--
Bruno Schneider
my id output:
uid=2201(bruno) gid=2201(bruno)
groups=2201(bruno),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),108(netdev),110(lpadmin),113(scanner),119(bluetooth),999(bumblebee),2202(ssh-user)
my debian/sid is a system continuously updated since years,
so it could be
hanks in advance for any hints.
Bruno
On Tue, Aug 4, 2015 at 12:56 PM, Bruno Schneider wrote:
> It's a notebook, no plugs or wires to test. But I did check the
> hardware by booting into an old Mandriva partition and sound works
> there.
I'm bumping up the thread with new information: sound works on
headphones, onl
annels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [24.00dB]
Front Right: 2 [67%] [24.00dB]
--
Bruno Schneider
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/CAP1wdQsLCqOkz1ALA=zrns3w0rojwhjbbvbem4ploj3a8wh...@mail.gmail.com
Master and Speaker. Auto-mute is disabled.
--
Bruno Schneider
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/CAP1wdQs0_fFzcxge=D3VQMACZb9_PL=0pwemp5mlqj61t9z...@mail.gmail.com
don't
know where to continue my search for errors.
My soundcard is a ALC269VB which seems to be detected by ALSA
$ grep Codec /proc/asound/card1/codec#0
Codec: Realtek ALC269VB
I have snd_hda_intel and snd_hda_codec_realtek modules loaded.
--
Bruno Schneider
--
To UNSUBSCRIBE
I stopped
nagios and delete its spool directory.
Then everything is up & running OK.
sudo df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/simfs 50 167715 332285 34% /
..etc..
Thanks for your attention.
Bruno
On Tue, Mar 24, 2015 at 12:07 PM, Darac Marjal
wrote:
&g
/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=419420k)
devpts on /dev/pts type devpts
(rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
sudo du -ch /run
72K/run
72Ktotal
But all services are freezed with quota exeeded errors.
when I log :
zsh: locking failed for /home/bruno
after installing gstreamer0.10-plugins-good, the problem seems
to be solved.
So, one needs gstreamer0.10-ffmpeg and gstreamer0.10-plugins-good. I
hope this helps others.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a su
On Thu, Feb 5, 2015 at 1:28 PM, Sven Hoexter wrote:
>
> IIRC gstreamer0.10-plugins-bad and libgstreamer-plugins-bad0.10-0
> should bring you the mp4 / H.264 support.
>
No, after installation, YouTube still tells me that H.264 is not supported.
--
Bruno Schneider
http://www.dcc.uf
t H.264 working.
In the about:buildconfig, I see the --enable-gstreamer=0.10 flag. I have
gstreamer0.10-ffmpeg and gstreamer0.10-plugins-base installed. There
must be some configuration I'm missing.
Can anybody help?
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE,
nd CD ROM... (it will show this line for about 30 seconds)
Loading second stage bootstrap... (after 30 seconds this line will show again)
When it returns to "Loading second stage bootstrap..." it does not do anything
and I can't get out of it.
Please, can someone help me.
Bruno
ot include that
section in your sources.
It seems you were trying to install a 32bits module on a 64bits system.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...
s working before) did not
solve anything.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/CAP1wdQ
I tried reverting to the previously working fglrx version but that
didn't solve anything.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@l
driver, but since I use testing,
I'll post them in a different thread.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
ht
are.
For instance, if your hardware is realtek, just install
firmware-realtek and it should work.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe".
e and XFCE work as I expect them to.
Now, I'm trying to figure out how to have the udisks daemon started
automatically...
[1] http://igurublog.wordpress.com/2012/03/11/udisks2-another-loss-for-linux/
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user
his yet, but messing
with SD cards, especially those with android software on it, doesn't
seems like the best answer.
I'll first look on how to make the whole device mountable. Any help on that?
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user
hal, libusb, pam, etc.
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/CAP1wdQsXOO_t7=wz+ndn
which was still using kernel 3.2.
Can anyone help?
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/cap1w
s Per Line: 90
Label Preamble: LabelPreamble
Software Mirror:HardwareMirror
WR,
Bruno
PS: Are there any other recommandable label printers that work under
debian & CUPS ?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe&quo
17:53:49 UTC
2013 x86_64 GNU/Linux
WR,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/51af5e27.1060...@voigt.tv
, Evaluating _PMM (20110623/power_meter-348)
Jun 5 12:07:47 xen42b kernel: [ 776.540702] hpasmlited[5767] general
protection ip:421e4e sp:7fff6990b0f8 error:0 in hpasmlited[40+35000]
Thanks in advance for any hints,
Bruno
info script reported in previous email.
Note that others distros (Xubuntu and Sabayon) boots correctly.
So how to correct GRUB regarding Debian problem ?
Manually or using tools (certainly preferred solution )?
I already ran update-grub but without any success.
Bye.
Bruno
--
To UNSUBSCRIBE, emai
ot be right but I don't know what they should be.
The two "looks at sector" seem *very* wrong.
OK, hereafter I added the drive info produced by boot_info_script.sh.
I'll also try the SuperGrub2Disk ASAP.
Bye.
Bruno
= Boot Info Summary:
===
'Operating System not found' is displayed once boot via GRUB command line.
[snip]
What's the output of bootinfoscript?
[snip]
So I ran boot_info_script.sh.
Which returns the following (snipped to mainly show /dev/sda4 on which
Debian is installed) :
Boot Info Script 0.60from 17 May
GRUB command line.
I suppose this is an interesting info.
What happened ?
How to correct this ?
I check the UUID (via GRUB2 -> ls) it is identical as the one
specified in the GRUB parameters.
Thanks for help.
Bruno
--
Linux Counter # 353844
https://linuxcounter.net/user/353844.html
--
T
yed.
Yes, a LiveCD Debian 6 works fine (however it was a i386, the
installed Debian is a amd64, the working Xubuntu is also a amd64).
Bye,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas.
27;nosplash debug --verbose' as a try to obtain
verbosity.
Then again update-grub to update grub.cfg file.
Thanks for attention and clue.
Bruno
--
Linux Counter # 353844
https://linuxcounter.net/user/353844.html
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subje
sputnik gnome-screensaver-dialog:
pam_unix(gnome-screensaver:auth): authentication failure; logname=
uid=1000 euid=1000 tty=:0.0 ruser= rhost= user=joe
I have no idea of what can I do to solve this.
My setup includes winbind authentication. May this be related?
Best regards,
Bruno Martins
bian Sid on it.
So dears Debian testers do not hesitate to ask me logs ..etc..
whatever might help Debian to improve support of 'bleeding-edge'
hardware as mentioned by Scott.
I use Debian on all my others PC and servers and will really enjoy to
use it also on my latest laptop.
g the backports.
But then which packages should I backport ?
Bye,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20110919184558.horde.74imy
.1.
I tried same thing with Ubuntu 11.04 : it works perfectly as FN keys
works without any loss of screen resolution.
Bye,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
/
[3] http://www.debian.org/releases/proposed-updates
SOLVED.
I used [1] to grab an unofficial image.
It works on my laptop as it includes indeed Broadcom driver needed for
Internet connection via Ethernet (for this netinst installation
procedure).
Thnaks for your support.
Bye,
Bruno
.ko or via a Debian package ?
- other solutions ?
Thanks for your attention.
Bye,
Bruno
Quoting Andrew McGlashan :
Hi Bruno,
Bruno Costacurta wrote:
I bought an Acer (model 4750) and tried to install on it Squeeze
image i386 CD-ROM.
During the network hardware detection the Ethernet card
not included in the Squeeze image i386 CD-Rom I used.
My questions is does Debian propose a package supporting Ethernet card
Broadcom BCM57785 ? If yes is there an image containing it (eg. CD
versus DVD images packages list) ?
Bye,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ
lly the problem you're experiencing regarding to dual-boot setup?
Best regards,
Bruno Martins
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4e5fa106.4020...@gmail.com
On Wed, Aug 31, 2011 at 1:02 PM, Camaleón wrote:
> On Tue, 30 Aug 2011 22:41:07 +0100, Bruno Martins wrote:
>
> > I am running Debian Squeeze on the following notebook:
> >
> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02511383&tmp_task=prodinfoCategory&a
On Wed, Aug 31, 2011 at 12:59 PM, Scott Ferguson <
prettyfly.producti...@gmail.com> wrote:
> On 31/08/11 21:02, Bruno Martins wrote:
>
>> Hello guys.
>>
>> Is there any way to avoid this? Imagine that I simply want to remove the
>> evolution package.
>>
lled, 6 to remove and 0 not upgraded.
After this operation, 11.3 MB disk space will be freed.
Do you want to continue [Y/n]?
This doesn't happen on Debian-based distributions such as Ubuntu, neither in
Fedora.
Best regards,
Bruno Martins
dphones on it. Still, no sound on the speakers.
Some command-line information about the system and the sound card can be
found here:
http://pastebin.com/62m5ESgF
Have anyone experienced this before?
Thanks for your time.
Best regards,
Bruno Martins
--
To UNSUBSCRIBE, email to debian-user-requ
pplication with a light background.
How is this feature called ?
And how may I turn if off ?
TIA,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4e1602d5.9000...@voigt.tv
rub2 to boot on LVM+RAID device.
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4dfdbe88.5030...@cyberoso.com
Hello,
seems i am unable to find the correct terms to get something useful
out of google
i have the following problem: i am used to a german keyboard, my wife
to a french layout
anyone who had to switch between those 2 will concur that the
respective other one is a real pain
Kamaraju S Kusumanchi wrote:
bruno wrote:
Kamaraju S Kusumanchi wrote:
I connect my PCs to internet via Verizon DSL router. When I go to
192.168.1.1 in a browser (say firefox), I am able to see all the
computers connected to this router.
However, from command line is there any way to probe
machines connected to the router?
thanks
Try this :
arpscan -l
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4db692c5.1070...@cyberoso.com
On Thu, Mar 31, 2011 at 01:49:14PM +, Camaleón wrote:
> And provided you seem to be using a recent -and customized?- kernel
> (Linux yoda 2.6.37-2-amd64) and also an updated Xorg server (1.9.5)
> upgrading any of those components does not make much sense, right?
yes the standard kernel coming
On Wed, Mar 30, 2011 at 06:28:02PM +, Camaleón wrote:
> On Wed, 30 Mar 2011 19:05:13 +0200, Bruno Boettcher wrote:
> You will need to find out why the intel driver fails to load and Xorg
> fallbacks to vesa or fb mode, if that's what is really happening here.
hmmm indeed rea
Hello
i just got a new machine, fitted with no graphics card, since the
processor and the motherboard together should be able to give a "decent"
graphics output...
till now i had no problems with intel integrated graphics, worked out of
the box
but this time i have only basic services workin
20.266945] [] ?
pvclock_clocksource_read+0x3a/0x8b │
Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266951] [] ?
child_rip+0x0/0x20 │
Thanks in advance for any hints,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Troub
n-amd64'
extra = 'clocksource=jiffies'
memory = '1024'
root= '/dev/xvda2 ro'
disk= [ 'drbd:bldlenny32-disk,xvda2,w',
'drbd:bldlenny32-swap,xvda1,w',
]
dhcp= 'dhcp'
On Wed, Jan 12, 2011 at 1:17 AM, Bruno Buys wrote:
> Hi all,
> I just configured a multiseat computer (
> https://secure.wikimedia.org/wikipedia/en/wiki/Multiseat_configuration)
> using my squeeze machine and help from the pt-debian-users list. Very nice,
> now I can share
Thanks for any inputs,
Bruno
elementary wrong, but I can't work out what. I'm hoping
one of you will be able to tell me what it is.
Thanks!
Hello,
Are you certain about the format?
You test your expression on one line, why not test it on the file :
fail2ban-regex log.txt ' - $'
Bruno
--
ebian script.
There is no /etc/init.d/functions file implemented in the Debian distro.
So solved.
Sorry for confusion.
Bye,
Bruno
--
Linux Counter #353844
http://counter.li.org/
--
To UNSUBSCRIBE, email to debian-user
Hello,
/etc/init.d/functions is missing.
How / where to grab it ?
Thanks.
Bye,
Bruno
--
Linux Counter #353844
http://counter.li.org/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of
: few times per month the Wifi
was correcly detected but NetworkManager was simply unable to connect
to it.
Now with WICD it simply works 24/7.
Bye,
Bruno
--
Linux Counter #353844
http://counter.li.org/
--
To UNSUBSCRIBE
Hello,
I just ordered a laptop with following CPU and vendor specifications
- CPU: Intel Double Cores 64bits (ULV SU4100)
- 2Mo cache
- UltraLowVoltage 10W 1.3Ghz
Which version (I intend to use Squeeze) is the best recommendation ?
Thanks for your advice.
Bye,
Bruno
--
Linux Counter #353844
is why the HTTP option is implemented for on popularity contest
as indicated in man pages.
Bye,
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trou
permanent error. The following address(es) failed:
sur...@popcon.debian.org
Mailing to remote domains not supported
...etc..
How to send email to popularity contest ?
Why is http not used ?
Thanks for help
Bye,
Bruno
--
Linux Counter #353844
h
Ken Teague wrote:
On Fri, Feb 5, 2010 at 12:39 AM, bruno wrote:
Why not simply use the t option for content listing :
tar tvf * --exclude-from $EXCLUDES
He's already creating the archive with -v. Why process the archive a
2nd time just to get a listing when it comes from s
1 a b c 2 d e fg
#
# Each whitespace-separated "word" in the file
#+ has been assigned to an element of the array.
element_count=${#array1[*]}
echo $element_count # 8
Why not simply use the t option for content listing :
tar tvf * --exclude-from
swapping drives falls into this categorie too.
Bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
-command-show-different-used-disk-space/
Hope it helps
Bruno
Stan Hoeppner wrote:
Tim Beauregard put forth on 1/26/2010 6:33 PM:
If anyone has any suggestions I would be very grateful.
Yes. I have a suggestion. Post _RELEVANT_ data. Show us the output of df -h
and du -ch.
--
To
panish) :
http://xbitcarry.wordpress.com/2009/11/10/instalar-pidgin-2-6-2-en-debian-lenny/
bruno
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Hello Andy,
I had the same problem.
Some google links say that USB devices must be plugged after/during VM
booting. That was true for me.
Take a look here <http://ubuntuforums.org/showthread.php?p=2202027>.
Bruno
On Fri, Sep 11, 2009 at 7:55 PM, Space Walker wrote:
> Hi,
>
>
Hi,
on my debian/squeeze 2.6.30.5 x86 system
I mounted a remote CIFS share
and would like to reexport it on my system again via Samba.
Is there a way to do it on linux yet ?
FreeNAS/BSD seems to be able to do that...
Thanks in advance for any hints,
Bruno
--
To UNSUBSCRIBE, email to debian
- "Jan Willem Stumpel" a écrit :
> > i use, whilst living in France, a german keyboard...
>
> You take the trouble to mention this: any special reason? For
> instance, do you want to type mostly French on a German keyboard?
exactly! and if you ask why: the french layout is completely out of
Hello
i have a problem on my debian machines lately concerning the keymapping
of the keyboard...
i use, whilst living in France, a german keyboard...
from the beginning the default setting of no-dead-keys was annoying, but
with a leattle tweakiing and configuring i could get rid of that
annoying
1 - 100 of 1002 matches
Mail list logo
